Re: [PATCH v4] clk: qcom: Add support for IPQ8064's global clock controller (GCC)

[Kumar Gala]

On Jun 17, 2014, at 2:46 PM, Kumar Gala <galak@xxxxxxxxxxxxxx> wrote:

> Add a driver for the global clock controller found on IPQ8064 based
> platforms. This should allow most non-multimedia device drivers to probe
> and control their clocks.
> 
> This is currently missing clocks for USB HSIC and networking devices.
> 
> Signed-off-by: Kumar Gala <galak@xxxxxxxxxxxxxx>
> Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> ---
> v4:
> * Fix usb utmi freq clk table
> * Fix numbering issue in dt-bindings/clock/qcom,gcc-ipq806x.h
> 
> v3:
> * Based on APQ8084 clk patches
> * Added USB3 and SATA clks
> * Minor clean ups (made hex numbers lowercase)
> 
> v2:
> * dropped audio clock from commit message
> * changed Kconfig symbol to IPQ_GCC_806X
> * Fixed PXO/CXO clk freq to 25Mhz
> 
> .../devicetree/bindings/clock/qcom,gcc.txt         |    1 +
> drivers/clk/qcom/Kconfig                           |    8 +
> drivers/clk/qcom/Makefile                          |    1 +
> drivers/clk/qcom/gcc-ipq806x.c                     | 2424 ++++++++++++++++++++
> include/dt-bindings/clock/qcom,gcc-ipq806x.h       |  293 +++
> include/dt-bindings/reset/qcom,gcc-ipq806x.h       |  132 ++
> 6 files changed, 2859 insertions(+)
> create mode 100644 drivers/clk/qcom/gcc-ipq806x.c
> create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq806x.h
> create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq806x.h

Mike,

Any update on pulling this in?

- k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/