[PATCH 13/15] Input - wacom: use hidinput_calc_abs_res instead of duplicating its code
From: Benjamin Tissoires
Date: Mon Jun 30 2014 - 17:27:05 EST
This may infer a small difference with the previous implementation
due to the DIV_ROUND_CLOSEST() in the hid implementation.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
---
drivers/input/tablet/wacom_sys.c | 48 ++++++++--------------------------------
1 file changed, 9 insertions(+), 39 deletions(-)
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index eab299c..a8294d4 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -85,49 +85,19 @@ static void wacom_close(struct input_dev *dev)
}
/*
- * Calculate the resolution of the X or Y axis, given appropriate HID data.
- * This function is little more than hidinput_calc_abs_res stripped down.
+ * Calculate the resolution of the X or Y axis using hidinput_calc_abs_res.
*/
static int wacom_calc_hid_res(int logical_extents, int physical_extents,
unsigned unit, int exponent)
{
- int prev;
- int unit_exponent = exponent;
-
- /* Check if the extents are sane */
- if (logical_extents <= 0 || physical_extents <= 0)
- return 0;
-
- /* Convert physical_extents to millimeters */
- if (unit == 0x11) { /* If centimeters */
- unit_exponent += 1;
- } else if (unit == 0x13) { /* If inches */
- prev = physical_extents;
- physical_extents *= 254;
- if (physical_extents < prev)
- return 0;
- unit_exponent -= 1;
- } else {
- return 0;
- }
-
- /* Apply negative unit exponent */
- for (; unit_exponent < 0; unit_exponent++) {
- prev = logical_extents;
- logical_extents *= 10;
- if (logical_extents < prev)
- return 0;
- }
- /* Apply positive unit exponent */
- for (; unit_exponent > 0; unit_exponent--) {
- prev = physical_extents;
- physical_extents *= 10;
- if (physical_extents < prev)
- return 0;
- }
-
- /* Calculate resolution */
- return logical_extents / physical_extents;
+ struct hid_field field = {
+ .logical_maximum = logical_extents,
+ .physical_maximum = physical_extents,
+ .unit = unit,
+ .unit_exponent = exponent
+ };
+
+ return hidinput_calc_abs_res(&field, ABS_X);
}
static void wacom_feature_mapping(struct hid_device *hdev,
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/