Re: [RFC PATCH 3/9] irqchip: GIC: Convert to EOImode == 1

[Marc Zyngier]

Hi Stefano,

On 30/06/14 20:09, Stefano Stabellini wrote:
> On Wed, 25 Jun 2014, Anup Patel wrote:
>> Hi Marc,
>>
>> On Wed, Jun 25, 2014 at 2:58 PM, Marc Zyngier <marc.zyngier@xxxxxxx> wrote:
>>> So far, GICv2 has been used in with EOImode == 0. The effect of this
>>> mode is to perform the priority drop and the deactivation of the
>>> interrupt at the same time.
>>>
>>> While this works perfectly for Linux (we only have a single priority),
>>> it causes issues when an interrupt is forwarded to a guest, and when
>>> we want the guest to perform the EOI itself.
>>>
>>> For this case, the GIC architecture provides EOImode == 1, where:
>>> - A write to the EOI register drops the priority of the interrupt and leaves
>>> it active. Other interrupts at the same priority level can now be taken,
>>> but the active interrupt cannot be taken again
>>> - A write to the DIR marks the interrupt as inactive, meaning it can
>>> now be taken again.
>>>
>>> We only enable this feature when booted in HYP mode. Also, as most device
>>> trees are broken (they report the CPU interface size to be 4kB, while
>>> the GICv2 CPU interface size is 8kB), output a warning if we're booted
>>> in HYP mode, and disable the feature.
>>>
>>> Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
>>> ---
>>>  drivers/irqchip/irq-gic.c       | 61 +++++++++++++++++++++++++++++++++++++----
>>>  include/linux/irqchip/arm-gic.h |  4 +++
>>>  2 files changed, 59 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
>>> index 508b815..9295bf2 100644
>>> --- a/drivers/irqchip/irq-gic.c
>>> +++ b/drivers/irqchip/irq-gic.c
>>> @@ -45,6 +45,7 @@
>>>  #include <asm/irq.h>
>>>  #include <asm/exception.h>
>>>  #include <asm/smp_plat.h>
>>> +#include <asm/virt.h>
>>>
>>>  #include "irq-gic-common.h"
>>>  #include "irqchip.h"
>>> @@ -94,6 +95,10 @@ struct irq_chip gic_arch_extn = {
>>>         .irq_set_wake   = NULL,
>>>  };
>>>
>>> +static struct irq_chip *gic_chip;
>>> +
>>> +static bool supports_deactivate = false;
>>> +
>>>  #ifndef MAX_GIC_NR
>>>  #define MAX_GIC_NR     1
>>>  #endif
>>> @@ -185,6 +190,12 @@ static void gic_eoi_irq(struct irq_data *d)
>>>         writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
>>>  }
>>>
>>> +static void gic_eoi_dir_irq(struct irq_data *d)
>>> +{
>>> +       gic_eoi_irq(d);
>>> +       writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_DEACTIVATE);
>>> +}
> 
> Would it be better if you moved the gic_eoi_irq call earlier? Maybe
> somewhere in gic_handle_irq?

I'm not sure I see what we'd gain by doing so. Can you elaborate?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/