Re: [PATCH v10 2/2] dmaengine: sun6i: Add driver for the Allwinner A31 DMA controller

[Mark Rutland]

On Tue, Jul 01, 2014 at 08:21:19AM +0100, Maxime Ripard wrote:
> On Mon, Jun 30, 2014 at 04:33:05PM +0100, Mark Rutland wrote:
> > On Mon, Jun 30, 2014 at 04:19:06PM +0100, Maxime Ripard wrote:
> > > On Mon, Jun 30, 2014 at 03:20:54PM +0100, Mark Rutland wrote:
> > > > Hi Maxime,
> > > > 
> > > > On Mon, Jun 30, 2014 at 02:20:54PM +0100, Maxime Ripard wrote:
> > > > > The Allwinner A31 has a 16 channels DMA controller that it shares with the
> > > > > newer A23. Although sharing some similarities with the DMA controller of the
> > > > > older Allwinner SoCs, it's significantly different, I don't expect it to be
> > > > > possible to share the driver for these two.
> > > > >
> > > > > The A31 Controller is able to memory-to-memory or memory-to-device transfers on
> > > > > the 16 channels in parallel.
> > > > >
> > > > > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> > > > > Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
> > > > > ---
> > > > >  drivers/dma/Kconfig     |    8 +
> > > > >  drivers/dma/Makefile    |    1 +
> > > > >  drivers/dma/sun6i-dma.c | 1058 +++++++++++++++++++++++++++++++++++++++++++++++
> > > > >  3 files changed, 1067 insertions(+)
> > > > >  create mode 100644 drivers/dma/sun6i-dma.c
> > > > 
> > > > [...]
> > > > 
> > > > > +       sdc->clk = devm_clk_get(&pdev->dev, NULL);
> > > > > +       if (IS_ERR(sdc->clk)) {
> > > > > +               dev_err(&pdev->dev, "No clock specified\n");
> > > > > +               return PTR_ERR(sdc->clk);
> > > > > +       }
> > > > > +
> > > > > +       mux = clk_get(NULL, "ahb1_mux");
> > > > > +       if (IS_ERR(mux)) {
> > > > > +               dev_err(&pdev->dev, "Couldn't get AHB1 Mux\n");
> > > > > +               return PTR_ERR(mux);
> > > > > +       }
> > > > > +
> > > > > +       pll6 = clk_get(NULL, "pll6");
> > > > > +       if (IS_ERR(pll6)) {
> > > > > +               dev_err(&pdev->dev, "Couldn't get PLL6\n");
> > > > > +               clk_put(mux);
> > > > > +               return PTR_ERR(pll6);
> > > > > +       }
> > > > 
> > > > I'm slightly confused. The binding listed a single unnamed clock (the
> > > > AHB clock). What is going on here?
> > > 
> > > The device itself needs only a single clock to work...
> > > 
> > > > 
> > > > > +       ret = clk_set_parent(mux, pll6);
> > > > > +       clk_put(pll6);
> > > > > +       clk_put(mux);
> > > > > +
> > > > > +       if (ret) {
> > > > > +               dev_err(&pdev->dev, "Couldn't reparent AHB1 on PLL6\n");
> > > > > +               return ret;
> > > > > +       }
> > > > 
> > > > Why do we need to reparent the mux?
> > > 
> > > ... but will function only if this clock is derived from PLL6.
> > 
> > Ok, but _why_ is that the case? Could we at least have a comment for
> > that?
> 
> I have no idea, sorry.

Oh no :(

Where did this requirement turn up? Did an issue crop up in testing and
using PLL6 just happened to work, or does some manual somewhere say that
the device must have its clock derived from PLL6 without further
explanation?

Does PLL6 drive some other clock that the DMA clock needs to stay in
sync with, possibly?

> > Where does the driver get the named clocks from if they aren't provided
> > on the device node? Is there a clock-ranges somewhere?
> 
> No, it just looks up the global clock name.

Ok.

> > It feels a little fragile to rely on the organisation of the clock tree
> > and the naming thereof. If the IP block is ever reused on an SoC with a
> > different clock tree layout then we have to handle things differently.
> 
> What do you suggest then?

I will admit that I don't have a better suggestion.

Without knowing which particular constraint on the mux parent clock we
care about it's difficult to suggest anything useful.

Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/