[PATCH 48/50] mars: add new file drivers/block/mars/Kconfig
From: Thomas Schoebel-Theuer
Date: Tue Jul 01 2014 - 17:49:37 EST
Signed-off-by: Thomas Schoebel-Theuer <tst@xxxxxxxxxxxxxxxxxx>
---
drivers/block/mars/Kconfig | 371 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 371 insertions(+)
create mode 100644 drivers/block/mars/Kconfig
diff --git a/drivers/block/mars/Kconfig b/drivers/block/mars/Kconfig
new file mode 100644
index 0000000..89765f2
--- /dev/null
+++ b/drivers/block/mars/Kconfig
@@ -0,0 +1,371 @@
+#
+# MARS configuration
+#
+
+config MARS
+ tristate "storage system MARS (EXPERIMENTAL)"
+ depends on BLOCK && PROC_SYSCTL && HIGH_RES_TIMERS && !DEBUG_SLAB && !DEBUG_SG
+ default n
+ ---help---
+ MARS is a long-distance replication of generic block devices.
+ It works asynchronously and tolerates network bottlenecks.
+ Please read the full documentation at
+ https://github.com/schoebel/mars/blob/master/docu/mars-manual.pdf?raw=true
+ Always compile MARS as a module!
+
+config MARS_CHECKS
+ bool "enable simple runtime checks in MARS"
+ depends on MARS
+ default y
+ ---help---
+ These checks should be rather lightweight. Use them
+ for beta testing and for production systems where
+ safety is more important than performance.
+ In case of bugs in the reference counting, an automatic repair
+ is attempted, which lowers the risk of memory corruptions.
+ Disable only if you need the absolutely last grain of
+ performance.
+ If unsure, say Y here.
+
+config MARS_DEBUG
+ bool "enable full runtime checks and some tracing in MARS"
+ depends on MARS
+ default n
+ ---help---
+ Some of these checks and some additional error tracing may
+ consume noticable amounts of memory. However, this is extremely
+ valuable for finding bugs, even in production systems.
+
+ OFF for production systems. ON for testing!
+
+ If you encounter bugs in production systems, you
+ may / should use this also in production if you carefully
+ monitor your systems.
+
+config MARS_DEBUG_MEM
+ bool "debug memory operations"
+ depends on MARS_DEBUG
+ default n
+ ---help---
+ This adds considerable space and time overhead, but catches
+ many errors (including some that are not caught by kmemleak).
+
+ OFF for production systems. ON for testing!
+ Use only for development and thorough testing!
+
+config MARS_DEBUG_MEM_STRONG
+ bool "intensified debugging of memory operations"
+ depends on MARS_DEBUG_MEM
+ default y
+ ---help---
+ Trace all block allocations, find more errors.
+ Adds some overhead.
+
+ Use for debugging of new bricks or for intensified
+ regression testing.
+
+config MARS_DEBUG_ORDER0
+ bool "also debug order0 operations"
+ depends on MARS_DEBUG_MEM
+ default n
+ ---help---
+ Turn even order 0 allocations into order 1 ones and provoke
+ heavy memory fragmentation problems from the buddy allocator,
+ but catch some additional memory problems.
+ Use only if you know what you are doing!
+ Normally OFF.
+
+config MARS_DEFAULT_PORT
+ int "port number where MARS is listening"
+ depends on MARS
+ default 7777
+ ---help---
+ Best practice is to uniformly use the same port number
+ in a cluster. Therefore, this is a compiletime constant.
+ You may override this at insmod time via the mars_port= parameter.
+
+config MARS_SEPARATE_PORTS
+ bool "use separate port numbers for traffic shaping"
+ depends on MARS
+ default y
+ ---help---
+ When enabled, the following port assignments will be used:
+
+ CONFIG_MARS_DEFAULT_PORT : updates of symlinks
+ CONFIG_MARS_DEFAULT_PORT + 1 : replication of logfiles
+ CONFIG_MARS_DEFAULT_PORT + 2 : (initial) sync traffic
+
+ As a consequence, external traffic shaping may be used to
+ individually control the network speed for different types
+ of traffic.
+
+ Please don't hinder the symlink updates in any way -- they are
+ most vital, and they produce no mass traffic at all
+ (it's only some kind of meta-information traffic).
+
+ Say Y if you have a big datacenter.
+ Say N if you cannot afford a bigger hole in your firefall.
+ If unsure, say Y.
+
+
+config MARS_LOGDIR
+ string "absolute path to the logging directory"
+ depends on MARS
+ default "/mars"
+ ---help---
+ Path to the directory where all MARS messages will reside.
+ Usually this is equal to the global /mars directory.
+
+ Logfiles and status files obey the following naming conventions:
+ 0.debug.log
+ 1.info.log
+ 2.warn.log
+ 3.error.log
+ 4.fatal.log
+ 5.total.log
+ Logfiles must already exist in order to be appended.
+ Logiles can be rotated by renaming them and creating
+ a new empty file in place of the old one.
+
+ Status files follow the same rules, but .log is replaced
+ by .status, and they are created automatically. Their content
+ is however limited to a few seconds or minutes.
+
+ Leave this at the default unless you know what you are doing.
+
+config MARS_ROLLOVER_INTERVAL
+ int "rollover time of logging status files (in seconds)"
+ depends on MARS
+ default 3
+ ---help---
+ This may influence the system load; dont use too low numbers.
+
+ Leave this at the default unless you know what you are doing.
+
+config MARS_SCAN_INTERVAL
+ int "re-scanning of symlinks in /mars/ (in seconds)"
+ depends on MARS
+ default 5
+ ---help---
+ This may influence the system load; dont use too low numbers.
+
+ Leave this at the default unless you know what you are doing.
+
+config MARS_PROPAGATE_INTERVAL
+ int "network propagation delay of changes in /mars/ (in seconds)"
+ depends on MARS
+ default 5
+ ---help---
+ This may influence the system load; dont use too low numbers.
+
+ Leave this at the default unless you know what you are doing.
+
+config MARS_SYNC_FLIP_INTERVAL
+ int "interrpt sync by logfile update after (seconds)"
+ depends on MARS
+ default 60
+ ---help---
+ 0 = OFF. Normally ON.
+ When disabled, application of logfiles may wait for
+ a very time, until full sync has finished. As a
+ consequence, your /mars/ filesystem may run out
+ of space. When enabled, the applied logfiles can
+ be deleted, freeing space on /mars/. Therefore,
+ will usually want this. However, you may increase
+ the time interval to increase throughput in favour
+ of latency.
+
+ Leave this at the default unless you know what you are doing.
+
+config MARS_NETIO_TIMEOUT
+ int "timeout for remote IO operations (in seconds)"
+ depends on MARS
+ default 30
+ ---help---
+ In case of network hangs, don't wait forever, but rather
+ abort with -ENOTCONN
+ when == 0, wait forever (may lead to hanging operations
+ similar to NFS hard mounts)
+
+ Leave this at the default unless you know what you are doing.
+
+config MARS_FAST_FULLSYNC
+ bool "decrease network traffic at initial sync"
+ depends on MARS
+ default y
+ ---help---
+ Normally ON.
+ When on, both sides will read the data, compute a md5
+ checksum, and compare them. Only in case the checksum
+ mismatches, the data will be actually transferred over
+ the network. This may increase the IO traffic in favour
+ of network traffic. Usually it does no harm to re-read
+ the same data twice (only in case of mismatches) over bio
+ because RAID controllers will usually cache their data
+ for some time. In case of buffered aio reads from filesystems,
+ the data is cached by the kernel anyway.
+
+config MARS_MIN_SPACE_4
+ int "absolutely necessary free space in /mars/ (hard limit in GB)"
+ depends on MARS
+ default 2
+ ---help---
+ HARDEST EMERGENCY LIMIT
+
+ When free space in /mars/ drops under this limit,
+ transaction logging to /mars/ will stop at all,
+ even at all primary resources. All IO will directly go to the
+ underlying raw devices. The transaction logfile sequence numbers
+ will be disrupted, deliberately leaving holes in the sequence.
+
+ This is a last-resort desperate action of the kernel.
+
+ As a consequence, all secodaries will have no chance to
+ replay at that gap, even if they got the logfiles.
+ The secondaries will stop at the gap, left in an outdated,
+ but logically consistent state.
+
+ After the problem has been fixed, the secondaries must
+ start a full-sync in order to continue replication at the
+ recent state.
+
+ This is the hardest measure the kernel can take in order
+ to TRY to continue undisrupted operation at the primary side.
+
+ In general, you should avoid such situations at the admin level.
+
+ Please implement your own monitoring at the admin level,
+ which warns you and/or takes appropriate countermeasures
+ much earlier.
+
+ Never rely on this emergency feature!
+
+config MARS_MIN_SPACE_3
+ int "free space in /mars/ for primary logfiles (additional limit in GB)"
+ depends on MARS
+ default 2
+ ---help---
+ MEDIUM EMERGENCY LIMIT
+
+ When free space in /mars/ drops under
+ MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3,
+ elder transaction logfiles will be deleted at primary resources.
+
+ As a consequence, the secondaries may no longer be able to
+ get a consecute series of copies of logfiles.
+ As a result, they may get stuck somewhere inbetween at an
+ outdated, but logically consistent state.
+
+ This is a desperate action of the kernel.
+
+ After the problem has been fixed, some secondaries may need to
+ start a full-sync in order to continue replication at the
+ recent state.
+
+ In general, you should avoid such situations at the admin level.
+
+ Please implement your own monitoring at the admin level,
+ which warns you and/or takes appropriate countermeasures
+ much earlier.
+
+ Never rely on this emergency feature!
+
+config MARS_MIN_SPACE_2
+ int "free space in /mars/ for secondary logfiles (additional limit in GB)"
+ depends on MARS
+ default 2
+ ---help---
+ MEDIUM EMERGENCY LIMIT
+
+ When free space in /mars/ drops under
+ MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2,
+ elder transaction logfiles will be deleted at secondary resources.
+
+ As a consequence, some local secondary resources
+ may get stuck somewhere inbetween at an
+ outdated, but logically consistent state.
+
+ This is a desperate action of the kernel.
+
+ After the problem has been fixed and the free space becomes
+ larger than MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2
+ + MARS_MIN_SPACE_2, the secondary tries to fetch the missing
+ logfiles from the primary again.
+
+ However, if the necessary logfiles have been deleted at the
+ primary side in the meantime, this may fail.
+
+ In general, you should avoid such situations at the admin level.
+
+ Please implement your own monitoring at the admin level,
+ which warns you and/or takes appropriate countermeasures
+ much earlier.
+
+ Never rely on this emergency feature!
+
+config MARS_MIN_SPACE_1
+ int "free space in /mars/ for replication (additional limit in GB)"
+ depends on MARS
+ default 2
+ ---help---
+ LOWEST EMERGENCY LIMIT
+
+ When free space in /mars/ drops under MARS_MIN_SPACE_4
+ + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2 + MARS_MIN_SPACE_1,
+ fetching of transaction logfiles will stop at local secondary
+ resources.
+
+ As a consequence, some local secondary resources
+ may get stuck somewhere inbetween at an
+ outdated, but logically consistent state.
+
+ This is a desperate action of the kernel.
+
+ After the problem has been fixed and the free space becomes
+ larger than MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2
+ + MARS_MIN_SPACE_2, the secondary will continue fetching its
+ copy of logfiles from the primary side.
+
+ In general, you should avoid such situations at the admin level.
+
+ Please implement your own monitoring at the admin level,
+ which warns you and/or takes appropriate countermeasures
+ much earlier.
+
+ Never rely on this emergency feature!
+
+config MARS_MIN_SPACE_0
+ int "total space needed in /mars/ for (additional limit in GB)"
+ depends on MARS
+ default 12
+ ---help---
+ Operational pre-requirement.
+
+ In order to use MARS, the total space available in /mars/ must
+ be at least MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2
+ + MARS_MIN_SPACE_1 + MARS_MIN_SPACE_0.
+
+ If you cannot afford that amount of storage space, please use
+ DRBD in place of MARS.
+
+config MARS_LOGROT_AUTO
+ int "automatic logrotate when logfile exceeds size (in GB)"
+ depends on MARS
+ default 32
+ ---help---
+ You could switch this off by setting to 0. However, deletion
+ of really huge logfiles can take several minutes, or even substantial
+ fractions of hours (depending on the underlying filesystem).
+ Thus it is highly recommended to limit the logfile size to some
+ reasonable maximum size. Switch only off for experiments!
+
+## remove_this
+config MARS_PREFER_SIO
+ bool "prefer sio bricks instead of aio"
+ depends on MARS_DEBUG
+ default n
+ ---help---
+ Normally OFF for production systems.
+ Only use as alternative for testing.
+
+## end_remove_this
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/