[PATCH V3 2/2] irqchip: gic: preserve gic V2 bypass bits in cpu ctrl register

From: Feng Kan
Date: Wed Jul 02 2014 - 17:19:34 EST


This change is made to preserve the GIC v2 bypass bits in the
GIC_CPU_CTRL register (also known as the GICC_CTLR register in spec).
This code will preserve all bits configured by the bootloader regarding
v2 bypass group bits. In the X-Gene platform, the bypass functionality
is not used and bypass bits should not be changed by the kernel gic
code as it could lead to incorrect behavior.

Signed-off-by: Feng Kan <fkan@xxxxxxx>
Reviewed-by: Vinayak Kale <vkale@xxxxxxx>
Reviewed-by: Anup Patel <apatel@xxxxxxx>
---
drivers/irqchip/irq-gic.c | 25 ++++++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 9ec3f4c..e70ef38 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -64,6 +64,7 @@
#define GIC_CPU_INT_PRI_THRESHOLD 0xf0
#define GIC_CPU_INT_SPURIOUS 1023
#define GIC_CPU_INT_ID_MASK 0x3ff
+#define GIC_CPU_DIS_BYPASS_MASK 0x1e0

union gic_base {
void __iomem *common_base;
@@ -394,6 +395,20 @@ static u8 gic_get_cpumask(struct gic_chip_data *gic)
return mask;
}

+static void gic_cpu_if_up(void)
+{
+ void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
+ u32 bypass;
+
+ /*
+ * Preserve bypass disable bits to be written back later
+ */
+ bypass = readl(cpu_base + GIC_CPU_CTRL);
+ bypass &= GIC_CPU_DIS_BYPASS_MASK;
+
+ writel_relaxed(bypass | GIC_CPU_ENABLE, cpu_base + GIC_CPU_CTRL);
+}
+
static void __init gic_dist_init(struct gic_chip_data *gic)
{
unsigned int i;
@@ -476,13 +491,17 @@ static void gic_cpu_init(struct gic_chip_data *gic)
dist_base + GIC_DIST_PRI + i * 4 / 4);

writel_relaxed(GIC_CPU_INT_PRI_THRESHOLD, base + GIC_CPU_PRIMASK);
- writel_relaxed(GIC_CPU_ENABLE, base + GIC_CPU_CTRL);
+ gic_cpu_if_up();
}

void gic_cpu_if_down(void)
{
void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
- writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
+ u32 val;
+
+ val = readl(cpu_base + GIC_CPU_CTRL);
+ val &= ~GIC_CPU_ENABLE;
+ writel_relaxed(val, cpu_base + GIC_CPU_CTRL);
}

#ifdef CONFIG_CPU_PM
@@ -618,7 +637,7 @@ static void gic_cpu_restore(unsigned int gic_nr)
dist_base + GIC_DIST_PRI + i * 4);

writel_relaxed(GIC_CPU_INT_PRI_THRESHOLD, cpu_base + GIC_CPU_PRIMASK);
- writel_relaxed(GIC_CPU_ENABLE, cpu_base + GIC_CPU_CTRL);
+ gic_cpu_if_up();
}

static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/