Re: [PATCH 09/18] AT91: Call at91_register_devices in the board files

From: Jean-Christophe PLAGNIOL-VILLARD
Date: Thu Jul 03 2014 - 12:57:24 EST

Next message: Mark Brown: "Re: [PATCH] regulator: arizona-ldo1: remove bypass functionality"
Previous message: Roger Quadros: "Re: [PATCH 5/6] phy: omap-usb2: Balance pm_runtime_enable() on probe failure"
In reply to: Maxime Ripard: "[PATCH 09/18] AT91: Call at91_register_devices in the board files"
Next in thread: Maxime Ripard: "Re: [PATCH 09/18] AT91: Call at91_register_devices in the board files"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

no do this at SoC level

Best Regards,
J.
On Jul 3, 2014, at 10:14 PM, Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:

>
> Make every board call the register_devices callback so that the devices
> declared by the SoC are registered.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/mach-at91/board-afeb-9260v1.c | 2 ++
> arch/arm/mach-at91/board-cam60.c | 2 ++
> arch/arm/mach-at91/board-cpu9krea.c | 2 ++
> arch/arm/mach-at91/board-flexibity.c | 2 ++
> arch/arm/mach-at91/board-sam9-l9260.c | 2 ++
> arch/arm/mach-at91/board-sam9260ek.c | 2 ++
> arch/arm/mach-at91/board-sam9261ek.c | 2 ++
> arch/arm/mach-at91/board-sam9263ek.c | 2 ++
> arch/arm/mach-at91/board-sam9m10g45ek.c | 2 ++
> arch/arm/mach-at91/board-sam9rlek.c | 2 ++
> arch/arm/mach-at91/board-snapper9260.c | 2 ++
> 11 files changed, 22 insertions(+)
>
> diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
> index 597c649170aa..fc9621ccb606 100644
> --- a/arch/arm/mach-at91/board-afeb-9260v1.c
> +++ b/arch/arm/mach-at91/board-afeb-9260v1.c
> @@ -167,6 +167,8 @@ static struct at91_cf_data afeb9260_cf_data = {
>
> static void __init afeb9260_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DBGU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
> index a30502c8d379..283655bd86c1 100644
> --- a/arch/arm/mach-at91/board-cam60.c
> +++ b/arch/arm/mach-at91/board-cam60.c
> @@ -170,6 +170,8 @@ static void __init cam60_add_device_nand(void)
>
> static void __init cam60_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DBGU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
> index 2037f78c84e7..29a89032bb9a 100644
> --- a/arch/arm/mach-at91/board-cpu9krea.c
> +++ b/arch/arm/mach-at91/board-cpu9krea.c
> @@ -322,6 +322,8 @@ static struct mci_platform_data __initdata cpu9krea_mci0_data = {
>
> static void __init cpu9krea_board_init(void)
> {
> + at91_register_devices();
> +
> /* NOR */
> cpu9krea_add_device_nor();
> /* Serial */
> diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
> index 68f1ab6bd08f..79bd411b0cee 100644
> --- a/arch/arm/mach-at91/board-flexibity.c
> +++ b/arch/arm/mach-at91/board-flexibity.c
> @@ -138,6 +138,8 @@ static struct gpio_led flexibity_leds[] = {
>
> static void __init flexibity_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DBGU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
> index d24dda67e2d3..70309404f366 100644
> --- a/arch/arm/mach-at91/board-sam9-l9260.c
> +++ b/arch/arm/mach-at91/board-sam9-l9260.c
> @@ -187,6 +187,8 @@ static struct gpio_led ek_leds[] = {
>
> static void __init ek_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DBGU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
> index 65dea12d685e..da9c5f1f2c49 100644
> --- a/arch/arm/mach-at91/board-sam9260ek.c
> +++ b/arch/arm/mach-at91/board-sam9260ek.c
> @@ -307,6 +307,8 @@ static void __init ek_add_device_buttons(void) {}
>
> static void __init ek_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DBGU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
> index 4637432de08f..d1be10b09ab3 100644
> --- a/arch/arm/mach-at91/board-sam9261ek.c
> +++ b/arch/arm/mach-at91/board-sam9261ek.c
> @@ -561,6 +561,8 @@ static struct gpio_led ek_leds[] = {
>
> static void __init ek_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DBGU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
> index cd2726ee5add..3f613d962d9b 100644
> --- a/arch/arm/mach-at91/board-sam9263ek.c
> +++ b/arch/arm/mach-at91/board-sam9263ek.c
> @@ -405,6 +405,8 @@ static struct at91_can_data ek_can_data = {
>
> static void __init ek_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DBGU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
> index 1ea61328f30d..33a7b19f7400 100644
> --- a/arch/arm/mach-at91/board-sam9m10g45ek.c
> +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
> @@ -450,6 +450,8 @@ static struct platform_device *devices[] __initdata = {
>
> static void __init ek_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DGBU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
> index b64648b4a1fc..262e3f957d9f 100644
> --- a/arch/arm/mach-at91/board-sam9rlek.c
> +++ b/arch/arm/mach-at91/board-sam9rlek.c
> @@ -292,6 +292,8 @@ static void __init ek_add_device_buttons(void) {}
>
> static void __init ek_board_init(void)
> {
> + at91_register_devices();
> +
> /* Serial */
> /* DBGU on ttyS0. (Rx & Tx only) */
> at91_register_uart(0, 0, 0);
> diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
> index 1b870e6def0c..2a817b85569f 100644
> --- a/arch/arm/mach-at91/board-snapper9260.c
> +++ b/arch/arm/mach-at91/board-snapper9260.c
> @@ -154,6 +154,8 @@ static void __init snapper9260_add_device_nand(void)
>
> static void __init snapper9260_board_init(void)
> {
> + at91_register_devices();
> +
> at91_add_device_i2c(snapper9260_i2c_devices,
> ARRAY_SIZE(snapper9260_i2c_devices));
>
> --
> 2.0.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Mark Brown: "Re: [PATCH] regulator: arizona-ldo1: remove bypass functionality"
Previous message: Roger Quadros: "Re: [PATCH 5/6] phy: omap-usb2: Balance pm_runtime_enable() on probe failure"
In reply to: Maxime Ripard: "[PATCH 09/18] AT91: Call at91_register_devices in the board files"
Next in thread: Maxime Ripard: "Re: [PATCH 09/18] AT91: Call at91_register_devices in the board files"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]