[PATCH 3/3] extcon: max77693: Force using UART path for jig

[Dmitry Kasatkin]

When USB cable is connected to jig, device disables console.
This patch forces using UART when jig cable is connected.
It allows to charge the device, which also prevents it from sleeping.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@xxxxxxxxxxx>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx>
Signed-off-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
---
 drivers/extcon/extcon-max77693.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 1b194b3..862d68f 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -296,10 +296,18 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
 		return ret;
 	}
 
-	if (attached)
-		ctrl1 = val;
-	else
+	if (attached) {
+		if (info->prev_cable_type ==
+		    MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF) {
+			/* if cable_type is jig, then force UART */
+			dev_info(info->dev, "For jig force using UART path\n");
+			ctrl1 = CONTROL1_SW_UART;
+		} else {
+			ctrl1 = val;
+		}
+	} else {
 		ctrl1 = CONTROL1_SW_OPEN;
+	}
 
 	ret = max77693_update_reg(info->max77693->regmap_muic,
 			MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/