[PATCH 2/3] uprobes: fix 1-byte opcode tables
From: Denys Vlasenko
Date: Fri Jul 04 2014 - 09:04:58 EST
This change fixes 1-byte opcode tables so that only insns
for which we have real reasons to disallow probing are marked
with unset bits.
To that end:
Set bits for all prefix bytes. Their setting is ignored anyway -
we check the bitmap against OPCODE1(insn), not against first byte.
Keeping them set to 0 only confuses code reader with
"why we don't support that opcode" question.
Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes).
Byte 62 (EVEX prefix) is not yet enabled since insn decoder
does not support that yet.
For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc).
They don't require any special handling.
For 64-bit mode, disable 9a and ea - these undefined opcodes
were mistakenly left enabled.
Signed-off-by: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
CC: Jim Keniston <jkenisto@xxxxxxxxxx>
CC: Masami Hiramatsu <masami.hiramatsu.pt@xxxxxxxxxxx>
CC: Srikar Dronamraju <srikar@xxxxxxxxxxxxxxxxxx>
CC: Ingo Molnar <mingo@xxxxxxxxxx>
CC: Oleg Nesterov <oleg@xxxxxxxxxx>
---
arch/x86/kernel/uprobes.c | 66 +++++++++++++----------------------------------
1 file changed, 18 insertions(+), 48 deletions(-)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 9ba2fb2..40dfb4e 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -67,18 +67,6 @@
* to keep gcc from statically optimizing it out, as variable_test_bit makes
* some versions of gcc to think only *(unsigned long*) is used.
*
- * Prefixes. Most marked as "bad", but it doesn't matter, since insn decoder
- * won't report *prefixes* as OPCODE1(insn).
- * 0f - 2-byte opcode prefix
- * 26,2e,36,3e - es:/cs:/ss:/ds:
- * 64 - fs: (marked as "good", why?)
- * 65 - gs: (marked as "good", why?)
- * 66 - operand-size prefix
- * 67 - address-size prefix
- * f0 - lock prefix
- * f2 - repnz (marked as "good", why?)
- * f3 - rep/repz (marked as "good", why?)
- *
* Opcodes we'll probably never support:
* 6c-6f - ins,outs. SEGVs if used in userspace
* e4-e7 - in,out imm. SEGVs if used in userspace
@@ -105,31 +93,27 @@
* Not supported since kernel's handling of userspace single-stepping
* (TF flag) is fragile.
* cf - iret. Normally not used in userspace. Doesn't SEGV unless arguments are bad
- *
- * Opcodes which can be enabled right away:
- * 63 - arpl. This insn has no unusual exceptions (it's basically an arith op).
- * d6 - salc. Undocumented "sign-extend carry flag to AL" insn
*/
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
static volatile u32 good_insns_32[256 / 32] = {
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
/* ---------------------------------------------- */
- W(0x00, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) | /* 00 */
+ W(0x00, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* 00 */
W(0x10, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) , /* 10 */
- W(0x20, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0, 1) | /* 20 */
- W(0x30, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0, 1) , /* 30 */
+ W(0x20, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 20 */
+ W(0x30, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 30 */
W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
- W(0x60, 1, 1, 1, 0, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
+ W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
- W(0xd0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
+ W(0xd0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
- W(0xf0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
+ W(0xf0, 1, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
/* ---------------------------------------------- */
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
};
@@ -139,19 +123,6 @@ static volatile u32 good_insns_32[256 / 32] = {
/* Good-instruction tables for 64-bit apps.
*
- * Prefixes. Most marked as "bad", but it doesn't matter, since insn decoder
- * won't report *prefixes* as OPCODE1(insn).
- * 0f - 2-byte opcode prefix
- * 26,2e,36,3e - es:/cs:/ss:/ds:
- * 40-4f - rex prefixes
- * 64 - fs: (marked as "good", why?)
- * 65 - gs: (marked as "good", why?)
- * 66 - operand-size prefix
- * 67 - address-size prefix
- * f0 - lock prefix
- * f2 - repnz (marked as "good", why?)
- * f3 - rep/repz (marked as "good", why?)
- *
* Genuinely invalid opcodes:
* 06,07 - formerly push/pop es
* 0e - formerly push cs
@@ -159,14 +130,13 @@ static volatile u32 good_insns_32[256 / 32] = {
* 1e,1f - formerly push/pop ds
* 27,2f,37,3f - formerly daa/das/aaa/aas
* 60,61 - formerly pusha/popa
- * 62 - formerly bound. EVEX prefix for AVX512
+ * 62 - formerly bound. EVEX prefix for AVX512 (not yet supported)
* 82 - formerly redundant encoding of Group1
- * 9a - formerly call seg:ofs (marked as "supported"???)
- * c4,c5 - formerly les/lds. VEX prefixes for AVX
+ * 9a - formerly call seg:ofs
* ce - formerly into
* d4,d5 - formerly aam/aad
* d6 - formerly undocumented salc
- * ea - formerly jmp seg:ofs (marked as "supported"???)
+ * ea - formerly jmp seg:ofs
*
* Opcodes we'll probably never support:
* 6c-6f - ins,outs. SEGVs if used in userspace
@@ -190,22 +160,22 @@ static volatile u32 good_insns_32[256 / 32] = {
static volatile u32 good_insns_64[256 / 32] = {
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
/* ---------------------------------------------- */
- W(0x00, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) | /* 00 */
+ W(0x00, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1) | /* 00 */
W(0x10, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 10 */
- W(0x20, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) | /* 20 */
- W(0x30, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 30 */
- W(0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 40 */
+ W(0x20, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) | /* 20 */
+ W(0x30, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) , /* 30 */
+ W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
- W(0x60, 0, 0, 0, 1, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
+ W(0x60, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
W(0x80, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
- W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
+ W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1) , /* 90 */
W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
- W(0xc0, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
+ W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
W(0xd0, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
- W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
- W(0xf0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
+ W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 1, 0, 0, 0, 0) | /* e0 */
+ W(0xf0, 1, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
/* ---------------------------------------------- */
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
};
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/