[PATCH 13/19] ARM: s5pv210: move debug-macro.S into the common space

From: Tomasz Figa
Date: Fri Jul 04 2014 - 13:51:43 EST


Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.

Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
---
arch/arm/Kconfig.debug | 12 +++++--
arch/arm/include/debug/s5pv210.S | 34 ++++++++++++++++++++
arch/arm/mach-s5pv210/include/mach/debug-macro.S | 41 ------------------------
3 files changed, 44 insertions(+), 43 deletions(-)
create mode 100644 arch/arm/include/debug/s5pv210.S
delete mode 100644 arch/arm/mach-s5pv210/include/mach/debug-macro.S

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8f90595..c2bcfcf 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -617,6 +617,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -630,6 +631,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -643,6 +645,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -653,8 +656,9 @@ choice
by CONFIG_S3C_LOWLEVEL_UART_PORT.

config DEBUG_S3C_UART3
- depends on PLAT_SAMSUNG && ARCH_EXYNOS
- select DEBUG_EXYNOS_UART
+ depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -949,6 +953,9 @@ config DEBUG_S3C2410_UART
config DEBUG_S3C24XX_UART
bool

+config DEBUG_S5PV210_UART
+ bool
+
config DEBUG_OMAP2PLUS_UART
bool
depends on ARCH_OMAP2PLUS
@@ -1009,6 +1016,7 @@ config DEBUG_LL_INCLUDE
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+ default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/sti.S" if DEBUG_STI_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART
diff --git a/arch/arm/include/debug/s5pv210.S b/arch/arm/include/debug/s5pv210.S
new file mode 100644
index 0000000..4f1a73e
--- /dev/null
+++ b/arch/arm/include/debug/s5pv210.S
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#define S3C_ADDR_BASE 0xF6000000
+#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000
+#define S5PV210_PA_UART 0xe2900000
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =S5PV210_PA_UART
+ ldr \rv, =S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
deleted file mode 100644
index 30b511a..0000000
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/