Re: [PATCH 3/5] staging:iio:hmc5843: register <-> value arrays now can have different lengths

[Jonathan Cameron]

On 02/07/14 14:52, Josef Gajdusek wrote:
> Changed structure of struct hmc5843_chip_info to include length of translation
> arrays. Code previously using #defined constant has been changed accordingly.
> This allows to integrate devices which do have different amounts of available
> rates/scales.
>
> Signed-off-by: Josef Gajdusek <atx@xxxxxxxx>
This is fine as well.

J
> ---
>   drivers/staging/iio/magnetometer/hmc5843_core.c | 34 +++++++++++++++++--------
>   1 file changed, 23 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
> index 4ad309b..b26ac9f 100644
> --- a/drivers/staging/iio/magnetometer/hmc5843_core.c
> +++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
> @@ -39,7 +39,6 @@
>    */
>   #define HMC5843_RANGE_GAIN_OFFSET		0x05
>   #define HMC5843_RANGE_GAIN_DEFAULT		0x01
> -#define HMC5843_RANGE_GAINS			8
>   #define HMC5843_RANGE_GAIN_MASK		0xe0
>
>   /* Device status */
> @@ -59,7 +58,6 @@
>    */
>   #define HMC5843_RATE_OFFSET			0x02
>   #define HMC5843_RATE_DEFAULT			0x04
> -#define HMC5843_RATES				7
>   #define HMC5843_RATE_MASK		0x1c
>
>   /* Device measurement configuration */
> @@ -69,15 +67,15 @@
>   #define HMC5843_MEAS_CONF_MASK			0x03
>
>   /* Scaling factors: 10000000/Gain */
> -static const int hmc5843_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
> +static const int hmc5843_regval_to_nanoscale[] = {
>   	6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714
>   };
>
> -static const int hmc5883_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
> +static const int hmc5883_regval_to_nanoscale[] = {
>   	7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662
>   };
>
> -static const int hmc5883l_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
> +static const int hmc5883l_regval_to_nanoscale[] = {
>   	7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478
>   };
>
> @@ -94,11 +92,11 @@ static const int hmc5883l_regval_to_nanoscale[HMC5843_RANGE_GAINS] = {
>    * 6		| 50			| 75
>    * 7		| Not used		| Not used
>    */
> -static const int hmc5843_regval_to_samp_freq[7][2] = {
> +static const int hmc5843_regval_to_samp_freq[][2] = {
>   	{0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0}
>   };
>
> -static const int hmc5883_regval_to_samp_freq[7][2] = {
> +static const int hmc5883_regval_to_samp_freq[][2] = {
>   	{0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0},
>   	{75, 0}
>   };
> @@ -107,7 +105,9 @@ static const int hmc5883_regval_to_samp_freq[7][2] = {
>   struct hmc5843_chip_info {
>   	const struct iio_chan_spec *channels;
>   	const int (*regval_to_samp_freq)[2];
> +	const int n_regval_to_samp_freq;
>   	const int *regval_to_nanoscale;
> +	const int n_regval_to_nanoscale;
>   };
>
>   /* The lower two bits contain the current conversion mode */
> @@ -248,7 +248,7 @@ static ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
>   	size_t len = 0;
>   	int i;
>
> -	for (i = 0; i < HMC5843_RATES; i++)
> +	for (i = 0; i < data->variant->n_regval_to_samp_freq; i++)
>   		len += scnprintf(buf + len, PAGE_SIZE - len,
>   			"%d.%d ", data->variant->regval_to_samp_freq[i][0],
>   			data->variant->regval_to_samp_freq[i][1]);
> @@ -278,7 +278,7 @@ static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
>   {
>   	int i;
>
> -	for (i = 0; i < HMC5843_RATES; i++)
> +	for (i = 0; i < data->variant->n_regval_to_samp_freq; i++)
>   		if (val == data->variant->regval_to_samp_freq[i][0] &&
>   			val2 == data->variant->regval_to_samp_freq[i][1])
>   			return i;
> @@ -307,7 +307,7 @@ static ssize_t hmc5843_show_scale_avail(struct device *dev,
>   	size_t len = 0;
>   	int i;
>
> -	for (i = 0; i < HMC5843_RANGE_GAINS; i++)
> +	for (i = 0; i < data->variant->n_regval_to_nanoscale; i++)
>   		len += scnprintf(buf + len, PAGE_SIZE - len,
>   			"0.%09d ", data->variant->regval_to_nanoscale[i]);
>
> @@ -327,7 +327,7 @@ static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2)
>   	if (val != 0)
>   		return -EINVAL;
>
> -	for (i = 0; i < HMC5843_RANGE_GAINS; i++)
> +	for (i = 0; i < data->variant->n_regval_to_nanoscale; i++)
>   		if (val2 == data->variant->regval_to_nanoscale[i])
>   			return i;
>
> @@ -480,17 +480,29 @@ static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
>   	[HMC5843_ID] = {
>   		.channels = hmc5843_channels,
>   		.regval_to_samp_freq = hmc5843_regval_to_samp_freq,
> +		.n_regval_to_samp_freq =
> +				ARRAY_SIZE(hmc5843_regval_to_samp_freq),
>   		.regval_to_nanoscale = hmc5843_regval_to_nanoscale,
> +		.n_regval_to_nanoscale =
> +				ARRAY_SIZE(hmc5843_regval_to_nanoscale),
>   	},
>   	[HMC5883_ID] = {
>   		.channels = hmc5883_channels,
>   		.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
> +		.n_regval_to_samp_freq =
> +				ARRAY_SIZE(hmc5883_regval_to_samp_freq),
>   		.regval_to_nanoscale = hmc5883_regval_to_nanoscale,
> +		.n_regval_to_nanoscale =
> +				ARRAY_SIZE(hmc5883_regval_to_nanoscale),
>   	},
>   	[HMC5883L_ID] = {
>   		.channels = hmc5883_channels,
>   		.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
> +		.n_regval_to_samp_freq =
> +				ARRAY_SIZE(hmc5883_regval_to_samp_freq),
>   		.regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
> +		.n_regval_to_nanoscale =
> +				ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
>   	},
>   };

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/