[PATCH] staging: rtl8192u: fix checkpatch error/warning in r819xU_phy.c
From: sanjeev sharma
Date: Tue Jul 08 2014 - 01:52:41 EST
From: sanjeevs1 <sanjeev_sharma@xxxxxxxxxx>
This is a patch to the r819xU_phy.c file that fixes up all the Error/Warning found by the checkpatch.pl tool
Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@xxxxxxxxxx>
---
drivers/staging/rtl8192u/r819xU_phy.c | 76 +++++++++++++++++------------------
1 file changed, 36 insertions(+), 40 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 02554c9..1dd1c1e 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -101,16 +101,15 @@ void rtl8192_setBBreg(struct net_device *dev, u32 reg_addr, u32 bitmask,
} else {
write_nic_dword(dev, reg_addr, data);
}
- return;
}
/******************************************************************************
* function: This function reads specific bits from BB register
* input: net_device *dev
- * u32 reg_addr //target addr to be readback
- * u32 bitmask //taget bit pos to be readback
- * output: none
- * return: u32 data //the readback register value
+ * u32 reg_addr //target addr to be readback
+ * u32 bitmask //taget bit pos to be readback
+ * output: none
+ * return: u32 data //the readback register value
* notice:
******************************************************************************/
u32 rtl8192_QueryBBReg(struct net_device *dev, u32 reg_addr, u32 bitmask)
@@ -192,7 +191,7 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
/* TODO: we should not delay such a long time. Ask for help from SD3 */
- usleep_range(1000, 1000);
+ usleep_range(1000, 2000);
ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack,
bLSSIReadBackData);
@@ -281,7 +280,6 @@ static void rtl8192_phy_RFSerialWrite(struct net_device *dev,
priv->RfReg0Value[eRFPath] << 16);
}
}
- return;
}
/******************************************************************************
@@ -332,7 +330,6 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
rtl8192_phy_RFSerialWrite(dev, eRFPath, reg_addr, data);
}
}
- return;
}
/******************************************************************************
@@ -481,9 +478,9 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
/******************************************************************************
* function: This function reads BB parameters from header file we generate,
* and do register read/write
- * input: net_device *dev
- * output: none
- * return: none
+ * input: net_device *dev
+ * output: none
+ * return: none
* notice: BB parameters may change all the time, so please make
* sure it has been synced with the newest.
*****************************************************************************/
@@ -513,7 +510,6 @@ void rtl8192_phy_configmac(struct net_device *dev)
rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1],
pdwArray[i+2]);
}
- return;
}
/******************************************************************************
@@ -559,7 +555,6 @@ void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType)
rtl819XAGCTAB_Array[i+1]);
}
}
- return;
}
/******************************************************************************
@@ -746,11 +741,11 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
bMask12Bits, WriteData[i]);
/* TODO: we should not delay for such a long time.
Ask SD3 */
- usleep_range(1000, 1000);
+ usleep_range(1000, 2000);
reg = rtl8192_phy_QueryRFReg(dev, eRFPath,
WriteAddr[HW90_BLOCK_RF],
bMask12Bits);
- usleep_range(1000, 1000);
+ usleep_range(1000, 2000);
break;
default:
@@ -846,7 +841,6 @@ static void rtl8192_BB_Config_ParaFile(struct net_device *dev)
priv->bCckHighPower = (u8)rtl8192_QueryBBReg(dev,
rFPGA0_XA_HSSIParameter2,
0x200);
- return;
}
/******************************************************************************
@@ -864,7 +858,6 @@ void rtl8192_BBConfig(struct net_device *dev)
* implemented, so use file first.
* FIXME: should implement it for hardcode? */
rtl8192_BB_Config_ParaFile(dev);
- return;
}
@@ -907,13 +900,11 @@ void rtl8192_phy_getTxPower(struct net_device *dev)
read_nic_byte(dev, rOFDM0_RxDetector3, &priv->framesync);
read_nic_byte(dev, rOFDM0_RxDetector2, &tmp);
priv->framesyncC34 = tmp;
- RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n",
+ RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x\n",
rOFDM0_RxDetector3, priv->framesync);
/* Read SIFS (save the value read fome MACPHY_REG.txt) */
read_nic_word(dev, SIFS, &priv->SifsTime);
-
- return;
}
/******************************************************************************
@@ -942,7 +933,6 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel)
__func__);
break;
}
- return;
}
/******************************************************************************
@@ -956,14 +946,13 @@ void rtl8192_phy_RFConfig(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
switch (priv->rf_chip) {
- case RF_8256:
- PHY_RF8256_Config(dev);
- break;
- default:
- RT_TRACE(COMP_ERR, "error chip id\n");
- break;
+ case RF_8256:
+ PHY_RF8256_Config(dev);
+ break;
+ default:
+ RT_TRACE(COMP_ERR, "error chip id\n");
+ break;
}
- return;
}
/******************************************************************************
@@ -974,7 +963,6 @@ void rtl8192_phy_RFConfig(struct net_device *dev)
******************************************************************************/
void rtl8192_phy_updateInitGain(struct net_device *dev)
{
- return;
}
/******************************************************************************
@@ -1094,7 +1082,6 @@ static void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
RT_TRACE(COMP_ERR, "unknown rf chip ID in %s()\n", __func__);
break;
}
- return;
}
/******************************************************************************
@@ -1190,10 +1177,12 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
/* If Rf off reason is from IPS,
LED should blink with no link */
if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS)
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
+ Adapter->HalFunc.LedControlHandler
+ (Adapter, LED_CTL_NO_LINK);
else
/* Turn off LED if RF is not ON. */
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
+ Adapter->HalFunc.LedControlHandler
+ (Adapter, LED_CTL_POWER_OFF);
break;
case eRfOn:
@@ -1201,10 +1190,12 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
happen when we quickly turn off and on HW RF.
*/
if (pMgntInfo->bMediaConnect == TRUE)
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
+ Adapter->HalFunc.LedControlHandler
+ (Adapter, LED_CTL_LINK);
else
/* Turn off LED if RF is not ON. */
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
+ Adapter->HalFunc.LedControlHandler
+ (Adapter, LED_CTL_NO_LINK);
break;
default:
@@ -1249,7 +1240,8 @@ static u8 rtl8192_phy_SetSwChnlCmdArray(SwChnlCmd *CmdTable, u32 CmdTableIdx,
return false;
}
if (CmdTableIdx >= CmdTableSz) {
- RT_TRACE(COMP_ERR, "%s(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n",
+ RT_TRACE(COMP_ERR,
+ "%s():invalid index,CmdTableIdx:%d, CmdTableSz:%d\n",
__func__, CmdTableIdx, CmdTableSz);
return false;
}
@@ -1476,6 +1468,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev)
u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
+
RT_TRACE(COMP_CH, "%s(), SwChnlInProgress: %d\n", __func__,
priv->SwChnlInProgress);
if (!priv->up)
@@ -1709,7 +1702,8 @@ void InitialGain819xUsb(struct net_device *dev, u8 Operation)
priv->InitialGainOperateType = Operation;
if (priv->up)
- queue_delayed_work(priv->priv_wq, &priv->initialgain_operate_wq, 0);
+ queue_delayed_work(priv->priv_wq,
+ &priv->initialgain_operate_wq, 0);
}
void InitialGainOperateWorkItemCallBack(struct work_struct *work)
@@ -1758,13 +1752,13 @@ void InitialGainOperateWorkItemCallBack(struct work_struct *work)
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n",
priv->initgain_backup.cca);
- RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n",
+ RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x\n",
initial_gain);
write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain);
- RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n",
+ RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x\n",
POWER_DETECTION_TH);
write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH);
break;
@@ -1798,14 +1792,16 @@ void InitialGainOperateWorkItemCallBack(struct work_struct *work)
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",
priv->initgain_backup.cca);
- rtl8192_phy_setTxPower(dev, priv->ieee80211->current_network.channel);
+ rtl8192_phy_setTxPower(dev,
+ priv->ieee80211->current_network.channel
+ );
if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
/* FW DIG ON */
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);
break;
default:
- RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n");
+ RT_TRACE(COMP_SCAN, "Unknown IG Operation.\n");
break;
}
}
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/