[PATCH 3.2 068/125] Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set

[Ben Hutchings]

3.2.61-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@xxxxxxxxxx>

commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream.

The touchpad on the GIGABYTE U2442 not only stops communicating when we try
to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS
versions also when we set bit 1 (enable two finger mode auto correct).

I've asked the original reporter of:
https://bugzilla.kernel.org/show_bug.cgi?id=61151

To check that not setting bit 1 does not lead to any adverse effects on his
model / BIOS revision, and it does not, so this commit fixes the touchpad
not working on these versions by simply never setting bit 1 for laptop
models with the no_hw_res quirk.

Reported-and-tested-by: James Lademann <jwlademann@xxxxxxxxx>
Tested-by: Philipp Wolfer <ph.wolfer@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 drivers/input/mouse/elantech.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -801,7 +801,7 @@ static int elantech_set_absolute_mode(st
 		if (etd->set_hw_resolution)
 			etd->reg_10 = 0x0b;
 		else
-			etd->reg_10 = 0x03;
+			etd->reg_10 = 0x01;
 
 		if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
 			rc = -1;
@@ -1225,7 +1225,8 @@ static int elantech_reconnect(struct psm
 }
 
 /*
- * Some hw_version 3 models go into error state when we try to set bit 3 of r10
+ * Some hw_version 3 models go into error state when we try to set
+ * bit 3 and/or bit 1 of r10.
  */
 static const struct dmi_system_id no_hw_res_dmi_table[] = {
 #if defined(CONFIG_DMI) && defined(CONFIG_X86)

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/