Re: [PATCH v2 0/2] ARM: at91: remove phy fixup for sama5d3xek boards

[Bo Shen]

Hi Boris,

On 07/10/2014 12:34 AM, Boris BREZILLON wrote:
> Hello Bo,
>
> I know you're quite busy, but if you have some time could you test this
> series on both CPU Modules (Embest and Ronetix): I only own the Embest
> one.
>
> Best Regards,
>
> Boris
>
> On Thu, 26 Jun 2014 12:13:33 +0200
> Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote:
>
> > Hello,
> >
> > This patch removes a board specific hook for sama5d3xek boards from the
> > sama5d3 generic DT board file.
> >
> > This hook (which register a phy fixup configuring board specific delays
> > in the ksz9021 ethernet phy) is now replaced by the appropriate DT
> > properties definitions in the sama5d3xcm.dtsi file.
> >
> > Best Regards,
> >
> > Boris
> >
> > Changes since v1:
> >   - fix txc-skew-ps and rxc-skew-ps delays
> >   - remove phy address info to handle Ronetix and Embest HW designs
> >
> > Boris BREZILLON (2):
> >    ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek
> >      boards
> >    ARM: at91: remove phy fixup for sama5d3xek boards
> >
> >   arch/arm/boot/dts/sama5d3xcm.dtsi   | 15 +++++++++++++++
> >   arch/arm/mach-at91/board-dt-sama5.c | 22 ----------------------
> >   2 files changed, 15 insertions(+), 22 deletions(-)

For this series, test OK on sama5d33ek (Ronetix) and sama5d34ek (Embest).

Tested-by: Bo Shen <voice.shen@xxxxxxxxx>

Best Regards,
Bo Shen

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/