[PATCH 3/4] Documentation: dt-bindings: update exynos-adc.txt with syscon handle

[Naveen Krishna Chatradhi]

This patch updates the DT bindings in exynos-adc.txt with the
syscon phandle to the ADC nodes.

Also removes the 2nd "reg" property, which used to carry the
ADC_PHY regiser base from PMU.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
To: devicetree@xxxxxxxxxxxxxxx
---
 .../devicetree/bindings/iio/adc/exynos-adc.txt     |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/exynos-adc.txt
index b87749a..808bbfa 100644
--- a/Documentation/devicetree/bindings/iio/adc/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/exynos-adc.txt
@@ -1,10 +1,11 @@
 Samsung Exynos Analog to Digital Converter bindings
 
 The devicetree bindings are for the new ADC driver written for
-Exynos4 and upward SoCs from Samsung.
+Exynos4 and Exynos5 series SoCs from Samsung.
+Now supports Exynos3250 too.
 
 New driver handles the following
-1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
+1. Supports ADC IF found on Exynos3250/EXYNOS4412/EXYNOS5 series
    and future SoCs from Samsung
 2. Add ADC driver under iio/adc framework
 3. Also adds the Documentation for device tree bindings
@@ -18,7 +19,7 @@ Required properties:
 				for controllers compatible with ADC of
 				Exynos3250.
 - reg:			Contains ADC register address range (base address and
-			length) and the address of the phy enable register.
+			length)
 - interrupts: 		Contains the interrupt information for the timer. The
 			format is being dependent on which interrupt controller
 			the Samsung device uses.
@@ -31,6 +32,8 @@ Required properties:
 			- "sclk_adc" : ADC special clock (only for Exynos3250
 				       and compatible ADC block)
 - vdd-supply		VDD input supply.
+- samsung,syscon-phandle Contains the PMU system controller node
+			(To access the ADC_PHY register)
 
 Note: child nodes can be added for auto probing from device tree.
 
@@ -38,7 +41,7 @@ Example: adding device info in dtsi file
 
 adc: adc@12D10000 {
 	compatible = "samsung,exynos-adc-v1";
-	reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+	reg = <0x12D10000 0x100>;
 	interrupts = <0 106 0>;
 	#io-channel-cells = <1>;
 	io-channel-ranges;
@@ -47,13 +50,14 @@ adc: adc@12D10000 {
 	clock-names = "adc";
 
 	vdd-supply = <&buck5_reg>;
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 Example: adding device info in dtsi file for Exynos3250 with additional sclk
 
 adc: adc@126C0000 {
 	compatible = "samsung,exynos3250-adc-v2";
-	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	reg = <0x126C0000 0x100>;
 	interrupts = <0 137 0>;
 	#io-channel-cells = <1>;
 	io-channel-ranges;
@@ -62,6 +66,7 @@ adc: adc@126C0000 {
 	clock-names = "adc", "sclk_adc";
 
 	vdd-supply = <&buck5_reg>;
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 Example: Adding child nodes in dts file
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/