[PATCH v4 0/6] Add Keystone PCIe controller driver

[Murali Karicheri]

This patch add PCIe controller driver for keystone SoCs. This is based on v3
of the series posted to the mailing list. Keystone PCI controller is based on
version 3.65 of the DW hardware. This driver re-uses some of the DW core driver
functions and required modification in some to support the old DW h/w based
keystone driver.

Testing:
=======

Testing of the driver is done on TI's K2HK EVM inserted to a Elma blu!eco
MicroTCA chassis AMC slot with JumpGen SEM-200 AMC SATA Storage and Dual
Ethernet Card Express inserted on another AMC slot. The e1000e driver available
on intel's website is patched to the kernel source tree and build. e1000e.ko
is dynamically loaded and executed ping and iperf tests to test the
functionality.

Thanks to all of you who have contributed by reviewing and offering valuable
comments. If you want me to add your "Reviewed-by", please let me know so that
I can add it to the commit log and re-send. I am still missing some mandatory
acked-by from maintainers (from the designware against 3/6 and 4/6 and DT
maintainers against 4/6 and 5/6). If you can provide them at the earliest, it
will be appreciated.

Thanks

Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>

CC: Russell King <linux@xxxxxxxxxxxxxxxx>
CC: Grant Likely <grant.likely@xxxxxxxxxx>
CC: Rob Herring <robh+dt@xxxxxxxxxx>
CC: Mohit Kumar <mohit.kumar@xxxxxx>
CC: Jingoo Han <jg1.han@xxxxxxxxxxx>
CC: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
CC: Pratyush Anand <pratyush.anand@xxxxxx>
CC: Richard Zhu <r65037@xxxxxxxxxxxxx>
CC: Kishon Vijay Abraham I <kishon@xxxxxx>
CC: Marek Vasut <marex@xxxxxxx>
CC: Arnd Bergmann <arnd@xxxxxxxx>
CC: Pawel Moll <pawel.moll@xxxxxxx>
CC: Mark Rutland <mark.rutland@xxxxxxx>
CC: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
CC: Kumar Gala <galak@xxxxxxxxxxxxxx>
CC: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
CC: Grant Likely <grant.likely@xxxxxxxxxx>

Changelog:

v4
 - Addressed comments against 5/5.
 - Added a patch 6/6 for Maintainer information
 - Added couple of Acked-By:
 - Rebased to latest Linux 3.16-rc4
v3
 - DW application register handling code is now part of
   Keystone PCI driver. RFC had this code part of Keystone
   PCI driver, then V1 moved this to a separate file to
   re-use on other platforms that uses this version of the
   DW h/w. Then based on comments against v2, this is moved
   back to Keystone driver.
 - Keystone SerDes phy driver is removed from this series so that
   this can be merged independent of that patch
 - added msi_set_irq()/clear_irq() API's to support Keystone

V2
 - Split the designware pcie enhancement patch to multiple
   patches based on functionality added
 - Remove the quirk code and add a patch to fix mps/mrss
   tuning for ARM. Use kernel command line parameter
   pci=pcie_bus_perf to work with Keystone PCI Controller.
   Following patch addressed this.
     [PATCH v1] ARM: pci: add call to pcie_bus_configure_settings()
 - Add documentation for device tree bindings
 - Add separate interrupt controller nodes for MSI and Legacy
   IRQs and use irq map for legacy IRQ
 - Use compatibility to identify v3.65 version of the DW hardware
   and use it to customize the designware common code.
 - Use reg property for configuration space instead of range
 - Other minor updates based on code inspection. 

V1
 - Add an interrupt controller node for Legacy irq chip and use
   interrupt map/map-mask property to map legacy IRQs A/B/C/D
 - Add a Phy driver to replace the original serdes driver
 - Move common application register handling code to a separate
   file to allow re-use across other platforms that use older
   DW PCIe h/w
 - PCI quirk for maximum read request size. Check and override only
   if the maximum is higher than what controller can handle.
 - Converted to a module platform driver.

Murali Karicheri (6):
  PCI: designware: add rd[wr]_other_conf API
  PCI: designware: refactor MSI code to work with v3.65 dw hardware
  PCI: designware: refactor host init code to re-use on keystone PCI
  PCI: designware: enhance dw core driver to support keystone PCI host
    controller
  PCI: add PCI controller for keystone PCIe h/w
  PCI: keystone: Update maintainer information

 .../devicetree/bindings/pci/designware-pcie.txt    |    2 +
 .../devicetree/bindings/pci/pci-keystone.txt       |   69 +++
 MAINTAINERS                                        |    7 +
 drivers/pci/host/Kconfig                           |    5 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pci-keystone-dw.c                 |  519 ++++++++++++++++++++
 drivers/pci/host/pci-keystone.c                    |  383 +++++++++++++++
 drivers/pci/host/pci-keystone.h                    |   56 +++
 drivers/pci/host/pcie-designware.c                 |  206 ++++++--
 drivers/pci/host/pcie-designware.h                 |   17 +-
 10 files changed, 1212 insertions(+), 53 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/pci-keystone.txt
 create mode 100644 drivers/pci/host/pci-keystone-dw.c
 create mode 100644 drivers/pci/host/pci-keystone.c
 create mode 100644 drivers/pci/host/pci-keystone.h

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/