Re: [PATCH v3 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY
From: Kishon Vijay Abraham I
Date: Mon Jul 14 2014 - 06:30:48 EST
On Monday 14 July 2014 02:17 PM, Srinivas Kandagatla wrote:
> Hi Kishon,
> First patch in this series adds support to the APQ8064 SATA PHY.
> Second patch updates the existing Kumar gala's device tree PHY bindings
> with APQ8064 soc specific compatible.
> Eventhough there are two seperate drivers for both IPQ and APQ SOCs,
> the bindings are exactly same, so I did not create new bindings document.
Er.. create a separate binding.
> Could you please pick these patches for v3.17.
Sure. please rebase to linux-phy next and re-send.
> Changes since v2:
> - added usleep_range in poll timeout as discussed
> with Bartlomiej Zolnierkiewicz.
> - Added missing pdev_set_drvdata spotted by
> Bartlomiej Zolnierkiewicz
> Changes since v1:
> - included DT bindings in the series.
> Srinivas Kandagatla (2):
> phy: qcom: Add driver for QCOM APQ8064 SATA PHY
> phy: qcom: Update APQ8064 PHY device tree bindings
> Documentation/devicetree/bindings/phy/qcom-phy.txt | 3 +-
> drivers/phy/Kconfig | 7 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-qcom-apq8064-sata.c | 288 +++++++++++++++++++++
> 4 files changed, 298 insertions(+), 1 deletion(-)
> create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/