[RESEND PATCH 2/8] ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck

[Kishon Vijay Abraham I]

From: Keerthy <j-keerthy@xxxxxx>

Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck
from dpll_pcie_ref_ck.

Figure 26-22. DPLL_PCIE_REF Functional Block Diagram in vE of DRA7xx ES1.0 TRM
shows the signal name for the output of post divider (M2) is CLKOUTLDO.

Figure 26-21. PCIe PHY Clock Generator Overview shows CLKOUTLDO is used as
input to apll mux.

So the actual output of dpll is dpll_pcie_ref_m2ldo_ck which is also the input
of apll.

Cc: Rajendra Nayak <rnayak@xxxxxx>
Cc: Tero Kristo <t-kristo@xxxxxx>
Cc: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 7148e7c..f5dca1f 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1152,7 +1152,7 @@
 
 	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
 		compatible = "ti,mux-clock";
-		clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>;
+		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
 		#clock-cells = <0>;
 		reg = <0x021c 0x4>;
 		ti,bit-shift = <7>;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/