[PATCH V4 1/6] staging: vt6556: Cleanup trivial coding style issues
From: Peter Senna Tschudin
Date: Mon Jul 14 2014 - 15:16:11 EST
This patch cleans up the following checkpatch issues:
- tabs instead of spaces on the beginning of a line
- use correct /* */ comment style
- put { and } on the correct places
- line over 80 chars
- indentation style for multi-line calls / comments
- space after semicolon ,
- new line after declaration
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
---
Cahnges from V3:
- Splitted the patches by change type
drivers/staging/vt6656/baseband.c | 23 ++++++++-------
drivers/staging/vt6656/card.c | 13 +++++----
drivers/staging/vt6656/card.h | 6 ++--
drivers/staging/vt6656/channel.c | 5 ++--
drivers/staging/vt6656/device.h | 10 +++----
drivers/staging/vt6656/main_usb.c | 59 ++++++++++++++++++++-------------------
6 files changed, 61 insertions(+), 55 deletions(-)
diff --git a/drivers/staging/vt6656/baseband.c b/drivers/staging/vt6656/baseband.c
index c1675d5..8678b41 100644
--- a/drivers/staging/vt6656/baseband.c
+++ b/drivers/staging/vt6656/baseband.c
@@ -26,9 +26,10 @@
* Date: Jun. 5, 2002
*
* Functions:
- * vnt_get_frame_time - Calculate data frame transmitting time
- * vnt_get_phy_field - Calculate PhyLength, PhyService and Phy Signal parameter for baseband Tx
- * BBbVT3184Init - VIA VT3184 baseband chip init code
+ * vnt_get_frame_time - Calculate data frame transmitting time
+ * vnt_get_phy_field - Calculate PhyLength, PhyService and Phy
+ * Signal parameter for baseband Tx
+ * BBbVT3184Init - VIA VT3184 baseband chip init code
*
* Revision History:
*
@@ -86,7 +87,7 @@ static u8 vnt_vt3184_al2230[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 /* 0xff */
};
-//{{RobertYu:20060515, new BB setting for VT3226D0
+/* {{RobertYu:20060515, new BB setting for VT3226D0 */
static u8 vnt_vt3184_vt3226d0[] = {
0x31, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00,
0x70, 0x45, 0x2a, 0x76, 0x00, 0x00, 0x80, 0x00, /* 0x0f */
@@ -122,8 +123,9 @@ static u8 vnt_vt3184_vt3226d0[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 /* 0xff */
};
-static const u16 awcFrameTime[MAX_RATE] =
-{10, 20, 55, 110, 24, 36, 48, 72, 96, 144, 192, 216};
+static const u16 awcFrameTime[MAX_RATE] = {
+ 10, 20, 55, 110, 24, 36, 48, 72, 96, 144, 192, 216
+};
/*
* Description: Calculate data frame transmitting time
@@ -191,9 +193,9 @@ unsigned int vnt_get_frame_time(u8 preamble_type, u8 pkt_type,
* tx_rate - Tx Rate
* Out:
* struct vnt_phy_field *phy
- * - pointer to Phy Length field
- * - pointer to Phy Service field
- * - pointer to Phy Signal field
+ * - pointer to Phy Length field
+ * - pointer to Phy Service field
+ * - pointer to Phy Signal field
*
* Return Value: none
*
@@ -467,7 +469,8 @@ int BBbVT3184Init(struct vnt_private *priv)
priv->ldBmThreshold[2] = 0;
priv->ldBmThreshold[3] = 0;
/* Fix VT3226 DFC system timing issue */
- vnt_mac_reg_bits_on(priv, MAC_REG_SOFTPWRCTL2, SOFTPWRCTL_RFLEOPT);
+ vnt_mac_reg_bits_on(priv, MAC_REG_SOFTPWRCTL2,
+ SOFTPWRCTL_RFLEOPT);
} else {
return true;
}
diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c
index ea06b63..37cd96b 100644
--- a/drivers/staging/vt6656/card.c
+++ b/drivers/staging/vt6656/card.c
@@ -55,11 +55,12 @@
#include "key.h"
#include "usbpipe.h"
-//const u16 cwRXBCNTSFOff[MAX_RATE] =
-//{17, 34, 96, 192, 34, 23, 17, 11, 8, 5, 4, 3};
+/* const u16 cwRXBCNTSFOff[MAX_RATE] =
+ {17, 34, 96, 192, 34, 23, 17, 11, 8, 5, 4, 3}; */
-static const u16 cwRXBCNTSFOff[MAX_RATE] =
-{192, 96, 34, 17, 34, 23, 17, 11, 8, 5, 4, 3};
+static const u16 cwRXBCNTSFOff[MAX_RATE] = {
+ 192, 96, 34, 17, 34, 23, 17, 11, 8, 5, 4, 3
+};
/*
* Description: Set NIC media channel
@@ -477,7 +478,7 @@ void vnt_update_top_rates(struct vnt_private *priv)
}
priv->byTopCCKBasicRate = top_cck;
- }
+}
int vnt_ofdm_min_rate(struct vnt_private *priv)
{
@@ -710,7 +711,7 @@ void vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf,
data[7] = (u8)(tsf >> 56);
vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
- MESSAGE_REQUEST_TBTT, 0, 8, data);
+ MESSAGE_REQUEST_TBTT, 0, 8, data);
dev_dbg(&priv->usb->dev, "%s TBTT: %8llx\n", __func__, tsf);
diff --git a/drivers/staging/vt6656/card.h b/drivers/staging/vt6656/card.h
index 5b7cc5a..80fcd53 100644
--- a/drivers/staging/vt6656/card.h
+++ b/drivers/staging/vt6656/card.h
@@ -39,9 +39,9 @@ typedef enum _CARD_PHY_TYPE {
PHY_TYPE_11A
} CARD_PHY_TYPE, *PCARD_PHY_TYPE;
-#define CB_MAX_CHANNEL_24G 14
-#define CB_MAX_CHANNEL_5G 42 /* add channel9(5045MHz), 41==>42 */
-#define CB_MAX_CHANNEL (CB_MAX_CHANNEL_24G+CB_MAX_CHANNEL_5G)
+#define CB_MAX_CHANNEL_24G 14
+#define CB_MAX_CHANNEL_5G 42 /* add channel9(5045MHz), 41==>42 */
+#define CB_MAX_CHANNEL (CB_MAX_CHANNEL_24G + CB_MAX_CHANNEL_5G)
struct vnt_private;
diff --git a/drivers/staging/vt6656/channel.c b/drivers/staging/vt6656/channel.c
index fb1838e..4a53f1a 100644
--- a/drivers/staging/vt6656/channel.c
+++ b/drivers/staging/vt6656/channel.c
@@ -28,8 +28,9 @@
*
*
* Revision History:
- * 01-18-2005 RobertYu: remove the for loop searching in ChannelValid,
- * change ChannelRuleTab to lookup-type, reorder table items.
+ * 01-18-2005 RobertYu: remove the for loop searching in
+ * ChannelValid, change ChannelRuleTab
+ * to lookup-type, reorder table items.
*
*
*/
diff --git a/drivers/staging/vt6656/device.h b/drivers/staging/vt6656/device.h
index 789c55d..50a6749 100644
--- a/drivers/staging/vt6656/device.h
+++ b/drivers/staging/vt6656/device.h
@@ -443,11 +443,11 @@ struct vnt_private {
struct ieee80211_low_level_stats low_stats;
};
-#define ADD_ONE_WITH_WRAP_AROUND(uVar, uModulo) { \
- if ((uVar) >= ((uModulo) - 1)) \
- (uVar) = 0; \
- else \
- (uVar)++; \
+#define ADD_ONE_WITH_WRAP_AROUND(uVar, uModulo) { \
+ if ((uVar) >= ((uModulo) - 1)) \
+ (uVar) = 0; \
+ else \
+ (uVar)++; \
}
#define fMP_DISCONNECTED 0x00000002
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index 4cdf29e..8e05f04 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -62,7 +62,7 @@
#include "int.h"
/* static int msglevel = MSG_LEVEL_DEBUG; */
-static int msglevel =MSG_LEVEL_INFO;
+static int msglevel = MSG_LEVEL_INFO;
/*
* define module options
@@ -75,18 +75,18 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DEVICE_FULL_DRV_NAM);
-#define DEVICE_PARAM(N,D) \
- static int N[MAX_UINTS]=OPTION_DEFAULT;\
- module_param_array(N, int, NULL, 0);\
- MODULE_PARM_DESC(N, D);
+#define DEVICE_PARAM(N, D) \
+ static int N[MAX_UINTS] = OPTION_DEFAULT; \
+ module_param_array(N, int, NULL, 0); \
+ MODULE_PARM_DESC(N, D)
-#define RX_DESC_DEF0 64
-DEVICE_PARAM(RxDescriptors0,"Number of receive usb desc buffer");
+#define RX_DESC_DEF0 64
+DEVICE_PARAM(RxDescriptors0, "Number of receive usb desc buffer");
-#define TX_DESC_DEF0 64
-DEVICE_PARAM(TxDescriptors0,"Number of transmit usb desc buffer");
+#define TX_DESC_DEF0 64
+DEVICE_PARAM(TxDescriptors0, "Number of transmit usb desc buffer");
-#define CHANNEL_DEF 6
+#define CHANNEL_DEF 6
DEVICE_PARAM(Channel, "Channel number");
/* PreambleType[] is the preamble length used for transmit.
@@ -177,13 +177,12 @@ static struct usb_device_id vt6656_table[] = {
/* frequency list (map channels to frequencies) */
/*
static const long frequency_list[] = {
- 2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484,
- 4915, 4920, 4925, 4935, 4940, 4945, 4960, 4980,
- 5035, 5040, 5045, 5055, 5060, 5080, 5170, 5180, 5190, 5200, 5210, 5220, 5230, 5240,
- 5260, 5280, 5300, 5320, 5500, 5520, 5540, 5560, 5580, 5600, 5620, 5640, 5660, 5680,
- 5700, 5745, 5765, 5785, 5805, 5825
- };
-
+ 2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462, 2467,
+ 2472, 2484, 4915, 4920, 4925, 4935, 4940, 4945, 4960, 4980, 5035, 5040,
+ 5045, 5055, 5060, 5080, 5170, 5180, 5190, 5200, 5210, 5220, 5230, 5240,
+ 5260, 5280, 5300, 5320, 5500, 5520, 5540, 5560, 5580, 5600, 5620, 5640,
+ 5660, 5680, 5700, 5745, 5765, 5785, 5805, 5825
+};
*/
static int vt6656_probe(struct usb_interface *intf,
@@ -206,16 +205,16 @@ static void usb_device_reset(struct vnt_private *pDevice);
static void
device_set_options(struct vnt_private *pDevice) {
- pDevice->cbTD = TX_DESC_DEF0;
- pDevice->cbRD = RX_DESC_DEF0;
- pDevice->byShortRetryLimit = SHORT_RETRY_DEF;
- pDevice->byLongRetryLimit = LONG_RETRY_DEF;
- pDevice->op_mode = NL80211_IFTYPE_UNSPECIFIED;
- pDevice->byBBType = BBP_TYPE_DEF;
- pDevice->byPacketType = pDevice->byBBType;
- pDevice->byAutoFBCtrl = AUTO_FB_0;
- pDevice->byPreambleType = 0;
- pDevice->bExistSWNetAddr = false;
+ pDevice->cbTD = TX_DESC_DEF0;
+ pDevice->cbRD = RX_DESC_DEF0;
+ pDevice->byShortRetryLimit = SHORT_RETRY_DEF;
+ pDevice->byLongRetryLimit = LONG_RETRY_DEF;
+ pDevice->op_mode = NL80211_IFTYPE_UNSPECIFIED;
+ pDevice->byBBType = BBP_TYPE_DEF;
+ pDevice->byPacketType = pDevice->byBBType;
+ pDevice->byAutoFBCtrl = AUTO_FB_0;
+ pDevice->byPreambleType = 0;
+ pDevice->bExistSWNetAddr = false;
}
/*
@@ -526,8 +525,9 @@ static void device_free_rx_bufs(struct vnt_private *priv)
static void usb_device_reset(struct vnt_private *pDevice)
{
- int status;
- status = usb_reset_device(pDevice->usb);
+ int status;
+
+ status = usb_reset_device(pDevice->usb);
if (status)
printk("usb_device_reset fail status=%d\n",status);
return ;
@@ -836,6 +836,7 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
u32 changed)
{
struct vnt_private *priv = hw->priv;
+
priv->current_aid = conf->aid;
if (changed & BSS_CHANGED_BSSID)
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/