Re: [PATCH v1] mmc: mmci: Add qcom dml support to the driver.

[Srinivas Kandagatla]

On 17/07/14 20:36, Srinivas Kandagatla wrote:
> On Qualcomm APQ8064 SOCs, SD card controller has an additional glue
> called DML (Data Mover Local/Lite) to assist dma transfers.
> This hardware needs to be setup before any dma transfer is requested.
> DML itself is not a DMA engine, its just a gule between the SD card
> controller and dma controller.
>
> Most of this code has been ported from qualcomm's 3.4 kernel.
>
> This patch adds the code necessary to intialize the hardware and setup
> before doing any dma transfers.
>
> Tested-by: Prakash Burla <prakash.burla@xxxxxxxxxxxxxxx>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---

Here is the change log which I forgot in the original patch

Changes since RFC:
	- Moved	qcom_dml.* to mmci_qcom_dml.* as suggested by Linus W.
	- added BAM DMA dependency in Kconfig as suggested by Linus W
	


>   drivers/mmc/host/Kconfig         |  11 +++
>   drivers/mmc/host/Makefile        |   1 +
>   drivers/mmc/host/mmci.c          |  19 ++++-
>   drivers/mmc/host/mmci_qcom_dml.c | 171 +++++++++++++++++++++++++++++++++++++++
>   drivers/mmc/host/mmci_qcom_dml.h |  17 ++++
>   5 files changed, 218 insertions(+), 1 deletion(-)
>   create mode 100644 drivers/mmc/host/mmci_qcom_dml.c
>   create mode 100644 drivers/mmc/host/mmci_qcom_dml.h


thanks,
srini
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/