[PATCH 02/14] scsi: split __scsi_queue_insert

[Christoph Hellwig]

Factor out a helper to set the _blocked values, which we'll reuse for the
blk-mq code path.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Reviewed-by: Webb Scales <webbnh@xxxxxx>
Acked-by: Jens Axboe <axboe@xxxxxxxxx>
Tested-by: Bart Van Assche <bvanassche@xxxxxxx>
Tested-by: Robert Elliott <elliott@xxxxxx>
---
 drivers/scsi/scsi_lib.c | 44 ++++++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 04c3684..3ac677c 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -75,28 +75,12 @@ struct kmem_cache *scsi_sdb_cache;
  */
 #define SCSI_QUEUE_DELAY	3
 
-/**
- * __scsi_queue_insert - private queue insertion
- * @cmd: The SCSI command being requeued
- * @reason:  The reason for the requeue
- * @unbusy: Whether the queue should be unbusied
- *
- * This is a private queue insertion.  The public interface
- * scsi_queue_insert() always assumes the queue should be unbusied
- * because it's always called before the completion.  This function is
- * for a requeue after completion, which should only occur in this
- * file.
- */
-static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
+static void
+scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct scsi_device *device = cmd->device;
 	struct scsi_target *starget = scsi_target(device);
-	struct request_queue *q = device->request_queue;
-	unsigned long flags;
-
-	SCSI_LOG_MLQUEUE(1, scmd_printk(KERN_INFO, cmd,
-		"Inserting command %p into mlqueue\n", cmd));
 
 	/*
 	 * Set the appropriate busy bit for the device/host.
@@ -123,6 +107,30 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
 		starget->target_blocked = starget->max_target_blocked;
 		break;
 	}
+}
+
+/**
+ * __scsi_queue_insert - private queue insertion
+ * @cmd: The SCSI command being requeued
+ * @reason:  The reason for the requeue
+ * @unbusy: Whether the queue should be unbusied
+ *
+ * This is a private queue insertion.  The public interface
+ * scsi_queue_insert() always assumes the queue should be unbusied
+ * because it's always called before the completion.  This function is
+ * for a requeue after completion, which should only occur in this
+ * file.
+ */
+static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
+{
+	struct scsi_device *device = cmd->device;
+	struct request_queue *q = device->request_queue;
+	unsigned long flags;
+
+	SCSI_LOG_MLQUEUE(1, scmd_printk(KERN_INFO, cmd,
+		"Inserting command %p into mlqueue\n", cmd));
+
+	scsi_set_blocked(cmd, reason);
 
 	/*
 	 * Decrement the counters, since these commands are no longer
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/