Re: [PATCH 1/2] mtd: nand: define struct nand_timings
From: Matthieu CASTET
Date: Tue Jul 22 2014 - 06:09:12 EST
Hi,
Do you know if all these timings will be used by the nand drivers ?
I did a similar patch [1] (that wasn't merged :( ), and I used reduced
timing info.
I also have support for the omap driver
(http://article.gmane.org/gmane.linux.ports.arm.omap/88606/match=) and
a controller we use in our chip (not upstream).
Matthieu
[1]
[PATCH 2/3] mtd nand : get timings from onfi
We get from onfi param the max speed supported by the chip.
A precomputed table for ONFI timings is generated.
Signed-off-by: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
---
drivers/mtd/nand/Makefile | 2 +-
drivers/mtd/nand/nand_base.c | 1 +
drivers/mtd/nand/nand_timing.c | 170 ++++++++++++++++++++++++++++++++++++++++
include/linux/mtd/nand.h | 56 +++++++++++++
4 files changed, 228 insertions(+), 1 deletion(-)
create mode 100644 drivers/mtd/nand/nand_timing.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 2cbd091..2fc1a99 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -54,4 +54,4 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
-nand-objs := nand_base.o nand_bbt.o
+nand-objs := nand_base.o nand_bbt.o nand_timing.o
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8916bc6..0d6bd88 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3238,6 +3238,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
ident_done:
+ nand_select_speed(chip, *maf_id, *dev_id);
/* Try to identify manufacturer */
for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
diff --git a/drivers/mtd/nand/nand_timing.c b/drivers/mtd/nand/nand_timing.c
new file mode 100644
index 0000000..7211c9c
--- /dev/null
+++ b/drivers/mtd/nand/nand_timing.c
@@ -0,0 +1,170 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+/*
+ * this table is precomputed from onfi timings with the following program
+ */
+#if 0
+int print_timing(const struct onfi_timings *timings, int edo_off)
+{
+ struct reduced_onfi t;
+ int tmp;
+ int edo = timings->tRC < 30 && !edo_off;
+
+ /* nWE low */
+ t.twp = max(timings->tWP, timings->tDS);
+
+ /* nCS low to nWE low */
+ tmp = max(timings->tCLS, timings->tCS);
+ tmp = max(tmp, timings->tALS);
+ t.twsetup = tmp - t.twp;
+ assert(t.twsetup >= 0);
+
+ /* nWE high */
+ tmp = max(timings->tWH, timings->tDH); /* nWE high & data hold */
+ tmp = max(tmp, timings->tCH); /* cs hold */
+ tmp = max(tmp, timings->tCLH); /* cmd hold */
+ t.twh = max(tmp, timings->tALH); /* addr hold */
+
+ assert(t.twp + t.twh <= timings->tWC);
+ t.twc = timings->tWC;
+
+ t.edo = edo;
+ if (edo == 0) {
+
+ /* nRE low */
+ t.trp = max(timings->tRP, timings->tREA);
+
+ /* nRE high */
+ t.treh = timings->tREH;
+ t.trc = max(timings->tRC, t.trp + t.treh);
+ }
+ else {
+ /* nRE low */
+ t.trp = timings->tRP;
+
+ /* nRE high */
+ t.treh = timings->tREH;
+
+ t.trc = max(timings->tRC, timings->tREA);
+ }
+
+ /* nCS low to nRE low */
+ t.trsetup = max(timings->tCEA - timings->tREA, timings->tCLR);
+
+ /* Min time from rdn rising edge to output hi-Z */
+ t.bta = timings->tRHZ;
+
+ /* Min time from busy rising edge and rdn falling edge (read).*/
+ t.tbusy = timings->tRR;
+
+ /* Min time from wrn rising edge to rdn falling edge. */
+ t.twhr = timings->tWHR;
+ assert(t.twhr >= 0);
+
+ t.tceh = 0;
+
+ printf("{\n");
+ printf("/* %s edo=%d */\n", timings->name, t.edo);
+ printf(".twp = %3d, .twh = %3d, .twc = %3d, .twsetup = %d,\n",
+ t.twp, t.twh, t.twc, t.twsetup);
+ printf(".trp = %3d, .treh = %3d, .trc = %3d, .trsetup = %d,\n",
+ t.trp, t.treh, t.trc, t.trsetup);
+ printf(".twhr = %d, .tceh = %d, .bta = %d, .tbusy = %d, .edo = %d,\n",
+ t.twhr, t.tceh, t.bta, t.tbusy, t.edo);
+ printf("},\n");
+#endif
+
+static struct reduced_onfi nand_timing[] =
+{
+ {
+ /* onfi mode 0 edo=0 */
+ .twp = 50, .twh = 30, .twc = 100, .twsetup = 20,
+ .trp = 50, .treh = 30, .trc = 100, .trsetup = 60,
+ .twhr = 120, .tceh = 0, .bta = 200, .tbusy = 39, .edo = 0,
+ },
+ {
+ /* onfi mode 1 edo=0 */
+ .twp = 25, .twh = 15, .twc = 45, .twsetup = 10,
+ .trp = 30, .treh = 15, .trc = 50, .trsetup = 15,
+ .twhr = 80, .tceh = 0, .bta = 100, .tbusy = 20, .edo = 0,
+ },
+ {
+ /* onfi mode 2 edo=0 */
+ .twp = 17, .twh = 15, .twc = 35, .twsetup = 8,
+ .trp = 25, .treh = 15, .trc = 40, .trsetup = 10,
+ .twhr = 80, .tceh = 0, .bta = 100, .tbusy = 20, .edo = 0,
+ },
+ {
+ /* onfi mode 3 edo=0 */
+ .twp = 15, .twh = 10, .twc = 30, .twsetup = 10,
+ .trp = 20, .treh = 10, .trc = 30, .trsetup = 10,
+ .twhr = 60, .tceh = 0, .bta = 100, .tbusy = 20, .edo = 0,
+ },
+ {
+ /* onfi mode 4 edo=1 */
+ .twp = 12, .twh = 10, .twc = 25, .twsetup = 8,
+ .trp = 12, .treh = 10, .trc = 25, .trsetup = 10,
+ .twhr = 60, .tceh = 0, .bta = 100, .tbusy = 20, .edo = 1,
+ },
+ {
+ /* onfi mode 5 edo=1 */
+ .twp = 10, .twh = 7, .twc = 20, .twsetup = 5,
+ .trp = 10, .treh = 7, .trc = 20, .trsetup = 10,
+ .twhr = 60, .tceh = 0, .bta = 100, .tbusy = 20, .edo = 1,
+ },
+ {
+ /* onfi mode 4 edo=0 */
+ .twp = 12, .twh = 10, .twc = 25, .twsetup = 8,
+ .trp = 20, .treh = 10, .trc = 30, .trsetup = 10,
+ .twhr = 60, .tceh = 0, .bta = 100, .tbusy = 20, .edo = 0,
+ },
+ {
+ /* onfi mode 5 edo=0 */
+ .twp = 10, .twh = 7, .twc = 20, .twsetup = 5,
+ .trp = 16, .treh = 7, .trc = 23, .trsetup = 10,
+ .twhr = 60, .tceh = 0, .bta = 100, .tbusy = 20, .edo = 0,
+ },
+};
+
+void nand_select_speed(struct nand_chip *chip, int maf_id, int dev_id)
+{
+ int i;
+ chip->onfi_speed = -1;
+ if (chip->onfi_version) {
+ int mode = le16_to_cpu(chip->onfi_params.async_timing_mode);
+ int max_mode = 0;
+ for (i = 0; i <= 5; i++) {
+ if (mode & (1 << i))
+ max_mode = i;
+ }
+ chip->onfi_speed = max_mode;
+ }
+ /*
+ * For flash that are not ONFI we could use maf_id and dev_id to select a
+ * speed. But we need to make sure to select a speed compatible with all
+ * flash generation that share the same ids.
+ */
+}
+
+const struct reduced_onfi *nand_get_timing(int mode, int edo)
+{
+ if (mode < 0)
+ mode = 0;
+ if (!edo && mode >= 4)
+ mode += 2;
+ if (mode > ARRAY_SIZE(nand_timing))
+ mode = 0;
+ return &(nand_timing[mode]);
+}
+EXPORT_SYMBOL_GPL(nand_get_timing);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c8518d4..95f2871 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -474,6 +474,7 @@ struct nand_buffers {
* @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is
* currently in data_buf.
* @subpagesize: [INTERN] holds the subpagesize
+ * @onfi_speed: [INTERN] holds the ONFI speed, -1 if not supported.
* @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
* non 0 if ONFI supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
@@ -545,6 +546,7 @@ struct nand_chip {
int badblockpos;
int badblockbits;
+ int onfi_speed;
int onfi_version;
struct nand_onfi_params onfi_params;
@@ -691,6 +693,60 @@ struct platform_nand_data {
struct platform_nand_ctrl ctrl;
};
+/**
+ * timing in ns,
+ * there are computed from onfi table :
+ * twsetup = max(tCLS, tCS, tALS) - twp
+ * twp = max(tWP, tDS)
+ * twh = max(tCLH, tCH, tALH, tDH, tWH)
+ * twc = tWC
+ * trsetup = max(tCEA-tREA, tCLR)
+ * treh = tREH
+ * if (edo == 0) {
+ * trp = max(tRP, tREA)
+ * trc = max(tRC, trp + treh)
+ * }
+ * else {
+ * trp = tRP
+ * trc = max(tRC, tREA)
+ * }
+ *
+ * bta = max(tRHZ, tCHZ)
+ * busy = tRR
+ * twhr = tWHR
+ *
+ * Note that twp + twh can be smaller than twc, so you should do :
+ * twp_clk = ns_to_ticks(twp)
+ * twh_clk = ns_to_ticks(max(twh, twc - ticks_to_ns(twp_clk)))
+ * or
+ * twh_clk = ps_to_ticks(max(ns_to_ps(twh), ns_to_ps(twc) - ticks_to_ps(twp_clk)))
+ * using picosecond can help for rounding. For example a 156Mhz, mode=4 edo=1
+ * with ps we got twp_clk=twh_clk=2 (12820 ps)
+ * without ps we got twp_clk = 2 (12 ns) and twh_clk=3 (18 ns)
+ * This is because 12820 + 12820 > 15000 but 12 + 12 < 15.
+ */
+struct reduced_onfi {
+ u8 twsetup; /* nCS low to nWE low */
+ u8 twp; /* nWE low */
+ u8 twh; /* nWE high */
+ u8 twc; /* write cyle */
+
+ u8 trsetup; /* nCS low to nRE low */
+ u8 trp; /* nRE low */
+ u8 treh; /* nRE high */
+ u8 trc; /* read cycle */
+
+ u8 bta; /* Min time from nRE rising edge to output hi-Z */
+ u8 tbusy; /* Min time from busy rising edge and nRE falling edge */
+ u8 twhr; /* Min time from nWE rising edge to nRE falling edge. */
+ u8 tceh; /* Min time for nCE high */
+
+ u8 edo; /* edo mode */
+};
+
+void nand_select_speed(struct nand_chip *chip, int maf_id, int dev_id);
+const struct reduced_onfi *nand_get_timing(int mode, int edo);
+
/* Some helpers to access the data structures */
static inline
struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
--
1.7.10.4
Le Fri, 11 Jul 2014 09:49:41 +0200,
Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx> a écrit :
> Define a struct containing the standard NAND timings as described in NAND
> datasheets.
>
> Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> ---
> include/linux/mtd/nand.h | 49 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> index 2f0af28..a3a45f2 100644
> --- a/include/linux/mtd/nand.h
> +++ b/include/linux/mtd/nand.h
> @@ -947,4 +947,53 @@ static inline int jedec_feature(struct nand_chip *chip)
> return chip->jedec_version ? le16_to_cpu(chip->jedec_params.features)
> : 0;
> }
> +
> +/**
> + * struct nand_sdr_timings - SDR NAND chip timings
> + *
> + * This struct defines the timing requirements of a SDR NAND chip.
> + * These informations can be found in every NAND datasheets and the timings
> + * meaning are described in the ONFI specifications:
> + * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
> + * Parameters)
> + *
> + * All these timings are expressed in picoseconds.
> + */
> +
> +struct nand_sdr_timings {
> + u32 tALH_min;
> + u32 tADL_min;
> + u32 tALS_min;
> + u32 tAR_min;
> + u32 tCEA_max;
> + u32 tCEH_min;
> + u32 tCH_min;
> + u32 tCHZ_max;
> + u32 tCLH_min;
> + u32 tCLR_min;
> + u32 tCLS_min;
> + u32 tCOH_min;
> + u32 tCS_min;
> + u32 tDH_min;
> + u32 tDS_min;
> + u32 tFEAT_max;
> + u32 tIR_min;
> + u32 tITC_max;
> + u32 tRC_min;
> + u32 tREA_max;
> + u32 tREH_min;
> + u32 tRHOH_min;
> + u32 tRHW_min;
> + u32 tRHZ_max;
> + u32 tRLOH_min;
> + u32 tRP_min;
> + u32 tRR_min;
> + u64 tRST_max;
> + u32 tWB_max;
> + u32 tWC_min;
> + u32 tWH_min;
> + u32 tWHR_min;
> + u32 tWP_min;
> + u32 tWW_min;
> +};
> #endif /* __LINUX_MTD_NAND_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/