[PATCH] ARM: zynq: DT: Add CAN node
From: Michal Simek
Date: Wed Jul 23 2014 - 09:05:55 EST
Add node describing Zynq's CAN controller.
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---
arch/arm/boot/dts/zynq-7000.dtsi | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 366ca6434f54..2287d9b4ed1a 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -71,7 +71,18 @@
interrupts = <0 7 4>;
interrupt-parent = <&intc>;
clocks = <&clkc 12>;
- };
+ };
+
+ can0: can@e0008000 {
+ compatible = "xlnx,zynq-can-1.0";
+ clocks = <&clkc 19>, <&clkc 36>;
+ clock-names = "can_clk", "pclk";
+ reg = <0xe0008000 0x1000>;
+ interrupts = <0 28 4>;
+ interrupt-parent = <&intc>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
gpio0: gpio@e000a000 {
compatible = "xlnx,zynq-gpio-1.0";
--
1.8.2.3
Attachment:
pgpTROcjtPl1R.pgp
Description: PGP signature