Re: [PATCH v4 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers
From: Nicolin Chen
Date: Fri Jul 25 2014 - 03:59:22 EST
Hi Varka,
Thank you for the comments!
On Fri, Jul 25, 2014 at 01:05:05PM +0530, Varka Bhadram wrote:
> On 07/25/2014 12:49 PM, Nicolin Chen wrote:
> (...)
>
> >+static const struct platform_device_id fsl_asrc_devtype[] = {
> >+ {
> >+ .name = "imx35-asrc",
> >+ .driver_data = IMX35_ASRC,
> >+ }, {
> >+ .name = "imx53-asrc",
> >+ .driver_data = IMX53_ASRC,
> >+ }, {
> >+ /* sentinel */
> >+ }
> >+};
> >+MODULE_DEVICE_TABLE(platform, fsl_asrc_devtype);
> >+
>
> where are you using fsl_asrc_devtype,,,?
>
> >+static const struct of_device_id fsl_asrc_ids[] = {
> >+ {
> >+ .compatible = "fsl,imx35-asrc",
> >+ .data = &fsl_asrc_devtype[IMX35_ASRC],
>
> Ya here ... but what is the use...?
I got your point. I will drop all these and move ids behind probe/remove()
as you suggested at the first place and then use of_device_is_compatible()
inside the probe() instead.
> >+ asrc_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
> >+ "mem", regs, &fsl_asrc_regmap_config);
>
> devm_regmap_init_mmio_clk(&pdev->dev,
> "mem", regs,
> &fsl_asrc_regmap_config);
I'll refine to
devm_regmap_init_mmio_clk(&pdev->dev, "mem", regs,
&fsl_asrc_regmap_config);
>
> >+ if (IS_ERR(asrc_priv->regmap)) {
> >+ dev_err(&pdev->dev, "failed to init regmap\n");
> >+ return PTR_ERR(asrc_priv->regmap);
> >+ }
> >+
> >+ irq = platform_get_irq(pdev, 0);
> >+ if (irq < 0) {
> >+ dev_err(&pdev->dev, "no irq for node %s\n", np->full_name);
> >+ return irq;
> >+ }
> >+
> >+ ret = devm_request_irq(&pdev->dev, irq, fsl_asrc_isr, 0,
> >+ asrc_priv->name, asrc_priv);
>
> same...
Sorry I don't see any problem with this devm_request_irq()...
Thank you,
Nicolin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/