Re: [PATCH] spi/pxa2xx-pci: Enable DMA binding through device name

From: Mika Westerberg
Date: Fri Jul 25 2014 - 04:23:08 EST


On Fri, Jul 25, 2014 at 09:58:42AM +0200, Arnd Bergmann wrote:
> On Friday 25 July 2014 10:11:38 Mika Westerberg wrote:
> > On Thu, Jul 24, 2014 at 05:06:20PM +0300, Mika Westerberg wrote:
> > > > On a related note, there seems to be a bug in this driver, which
> > > > attempts to set the slave_id through dmaengine_slave_config(), which
> > > > is wrong in both cases, ACPI and filter functions.
> > >
> > > Good point. We will fix this, thanks.
> >
> > I take that back. How we are supposed to set the slave_id if we don't
> > have request line information available (from ACPI or DT)?
>
> If you don't have the request line information, you are screwed and you
> can't set it from either the filter function or slave_config.
>
> However, it looks like you do have it, at least this is what the
> code tells me:
>
> static struct pxa_spi_info spi_info_configs[] = {
> [PORT_CE4100] = {
> ...
> },
> [PORT_BYT] = {
> .type = LPSS_SSP,
> .port_id = 0,
> .num_chipselect = 1,
> .tx_slave_id = 0,
> .tx_chan_id = 0,
> .rx_slave_id = 1,
> .rx_chan_id = 1,
> },
> };

That's right we do have it.

> All you need to do is change your filter function to take the
> slave id from pxa_spi_info and stick it in there, e.g.
>
> static bool pxa2xx_spi_dw_dma_filter(struct dma_chan *chan, void *param)
> {
> const struct pxa2xx_spi_master *pdata = param;
> struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
>
> dwc->request_line = fargs->req;
> dwc->src_master = 0;
> dwc->dst_master = 0;
>
> return 1;
> }

Oh man. That makes pxa2xx_spi dependent on a certain specific DMA engine
driver.

> Note that the filter function by definition is specific to the dma
> controller, not the dma slave (that's why most people define it in
> the dmaengine driver), and the pxa2xx_spi_dma_filter() function used
> in spi-pxa2xx-dma.c looks like it was written for another dma engine:

I wonder what's the rationale that passing slave_id with
dma_slave_config is wrong? The current code works fine with that and is
is independent of the DMA engine driver (even though we know that it is
going to be dw-dma).

The dw-dma handles slave_id in its implementation of
dmaengine_slave_config().
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/