Re: Subject: [PATCH 1/1] mtd:nand:fix nand_lock/unlock() function

[Brian Norris]

Hi White,

You've responded to one of my messages, but your mail server is also
sending bounce replies. You might want to contact your I.T. about this.
(I'll let you know if I ever stop getting bounces.)

On Thu, Jul 24, 2014 at 01:00:01AM +0000, bpqw wrote:
> Do nand reset before write protect check
> If we want to check the WP# low or high through STATUS READ and check bit 7,
> we must reset the device, other operation (eg.erase/program a locked block) can
> also clear the bit 7 of status register.

This description doesn't really tell me why we need this patch.

First of all, where is the 'lock' sequence specified? I see the commit
that introduced nand_lock() (without any users) which says Micron parts
support it, but I don't see it documented in the datasheet:

  commit 7d70f334ad2bf1b3aaa1f0699c0f442e14bcc9e0
  Author: Vimal Singh <vimal.newwork@xxxxxxxxx>
  Date:   Mon Feb 8 15:50:49 2010 +0530

      mtd: nand: add lock/unlock routines

Now, supposing this is documented somewhere, are you seeing some kind of
out-of-spec behavior? Is this a controller quirk you're seeing? Why
should I need to reset the chip? I would presume that 

  chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);

would refresh the status properly. Is that not the case?

> Signed-off-by: White Ding <bpqw@xxxxxxxxxx>
> ---
>  drivers/mtd/nand/nand_base.c |   18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 41167e9..22dd3aa 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -965,6 +965,15 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>  
>  	chip->select_chip(mtd, chipnr);
>  
> +	/*
> +	 * Reset the chip.
> +	 * If we want to check the WP through READ STATUS and check the bit 7
> +	 * we must reset the chip
> +	 * some operation can also clear the bit 7 of status register
> +	 * eg. erase/program a locked block
> +	 */
> +	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
> +
>  	/* Check, if it is write protected */
>  	if (nand_check_wp(mtd)) {
>  		pr_debug("%s: device is write protected!\n",
> @@ -1015,6 +1024,15 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>  
>  	chip->select_chip(mtd, chipnr);
>  
> +	/*
> +	 * Reset the chip.
> +	 * If we want to check the WP through READ STATUS and check the bit 7
> +	 * we must reset the chip
> +	 * some operation can also clear the bit 7 of status register
> +	 * eg. erase/program a locked block
> +	 */
> +	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
> +
>  	/* Check, if it is write protected */
>  	if (nand_check_wp(mtd)) {
>  		pr_debug("%s: device is write protected!\n",

Brian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/