[PATCH v2 6/7] ARM: dts: vf610-colibri: Add USB support

[Stefan Agner]

Add USB support for Colibri VF61 modules. The Colibri standard pinout
defines a pin for USB over-current. However, due to lack of pinmux
options, the USB hosts over-current protection signal of the Colibri
standard could not be connected to the PHY's over-current protection.
Hence we need to disable the over-current functionality of the USB
controller.

Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
 arch/arm/boot/dts/vf610-colibri.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts
index aecc7db..f2a950d 100644
--- a/arch/arm/boot/dts/vf610-colibri.dts
+++ b/arch/arm/boot/dts/vf610-colibri.dts
@@ -69,6 +69,16 @@
 	status = "okay";
 };
 
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
 &iomuxc {
 	vf610-colibri {
 		pinctrl_esdhc1: esdhc1grp {
-- 
2.0.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/