[PATCH 13/19] staging: comedi: amplc_pci230: remove unnecessary braces
From: Ian Abbott
Date: Tue Jul 29 2014 - 08:01:13 EST
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
drivers/staging/comedi/drivers/amplc_pci230.c | 151 ++++++++++----------------
1 file changed, 58 insertions(+), 93 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 4222e28..df58679 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -672,7 +672,7 @@ static int get_resources(struct comedi_device *dev, unsigned int res_mask,
ok = 1;
claimed = 0;
spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
- for (b = 1, i = 0; (i < NUM_RESOURCES) && res_mask; b <<= 1, i++) {
+ for (b = 1, i = 0; (i < NUM_RESOURCES) && res_mask; b <<= 1, i++)
if (res_mask & b) {
res_mask &= ~b;
if (devpriv->res_owner[i] == OWNER_NONE) {
@@ -690,7 +690,6 @@ static int get_resources(struct comedi_device *dev, unsigned int res_mask,
break;
}
}
- }
spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
return ok;
}
@@ -710,13 +709,12 @@ static void put_resources(struct comedi_device *dev, unsigned int res_mask,
unsigned long irqflags;
spin_lock_irqsave(&devpriv->res_spinlock, irqflags);
- for (b = 1, i = 0; (i < NUM_RESOURCES) && res_mask; b <<= 1, i++) {
+ for (b = 1, i = 0; (i < NUM_RESOURCES) && res_mask; b <<= 1, i++)
if (res_mask & b) {
res_mask &= ~b;
if (devpriv->res_owner[i] == owner)
devpriv->res_owner[i] = OWNER_NONE;
}
- }
spin_unlock_irqrestore(&devpriv->res_spinlock, irqflags);
}
@@ -839,7 +837,7 @@ static int pci230_ai_rinsn(struct comedi_device *dev,
chan = CR_CHAN(insn->chanspec);
range = CR_RANGE(insn->chanspec);
aref = CR_AREF(insn->chanspec);
- if (aref == AREF_DIFF) {
+ if (aref == AREF_DIFF)
/* Differential. */
if (chan >= s->n_chan / 2) {
dev_dbg(dev->class_dev,
@@ -847,7 +845,6 @@ static int pci230_ai_rinsn(struct comedi_device *dev,
__func__, (s->n_chan / 2) - 1);
return -EINVAL;
}
- }
/*
* Use Z2-CT2 as a conversion trigger instead of the built-in
@@ -862,19 +859,18 @@ static int pci230_ai_rinsn(struct comedi_device *dev,
if (aref == AREF_DIFF) {
/* Differential. */
gainshift = chan * 2;
- if (devpriv->hwver == 0) {
+ if (devpriv->hwver == 0)
/*
* Original PCI230/260 expects both inputs of the
* differential channel to be enabled.
*/
adcen = 3 << gainshift;
- } else {
+ else
/*
* PCI230+/260+ expects only one input of the
* differential channel to be enabled.
*/
adcen = 1 << gainshift;
- }
adccon |= PCI230_ADC_IM_DIF;
} else {
/* Single ended. */
@@ -953,10 +949,9 @@ static int pci230_ao_winsn(struct comedi_device *dev,
* Writing a list of values to an AO channel is probably not
* very useful, but that's how the interface is defined.
*/
- for (i = 0; i < insn->n; i++) {
+ for (i = 0; i < insn->n; i++)
/* Write value to DAC and store it. */
pci230_ao_write_nofifo(dev, data[i], chan);
- }
/* return the number of samples read/written */
return i;
@@ -1025,7 +1020,7 @@ static int pci230_ao_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_INT);
tmp = TRIG_TIMER | TRIG_INT;
- if ((thisboard->min_hwver > 0) && (devpriv->hwver >= 2)) {
+ if ((thisboard->min_hwver > 0) && (devpriv->hwver >= 2))
/*
* For PCI230+ hardware version 2 onwards, allow external
* trigger from EXTTRIG/EXTCONVCLK input (PCI230+ pin 25).
@@ -1041,7 +1036,6 @@ static int pci230_ao_cmdtest(struct comedi_device *dev,
* guarantee!
*/
tmp |= TRIG_EXT;
- }
err |= cfc_check_trigger_src(&cmd->scan_begin_src, tmp);
err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_NOW);
@@ -1151,18 +1145,16 @@ static void pci230_ao_stop(struct comedi_device *dev,
if (!started)
return;
cmd = &s->async->cmd;
- if (cmd->scan_begin_src == TRIG_TIMER) {
+ if (cmd->scan_begin_src == TRIG_TIMER)
/* Stop scan rate generator. */
pci230_cancel_ct(dev, 1);
- }
/* Determine interrupt source. */
- if (devpriv->hwver < 2) {
+ if (devpriv->hwver < 2)
/* Not using DAC FIFO. Using CT1 interrupt. */
intsrc = PCI230_INT_ZCLK_CT1;
- } else {
+ else
/* Using DAC FIFO interrupt. */
intsrc = PCI230P2_INT_DAC;
- }
/*
* Disable interrupt and wait for interrupt routine to finish running
* unless we are called from the interrupt routine.
@@ -1249,10 +1241,9 @@ static int pci230_handle_ao_fifo(struct comedi_device *dev,
/* Fixed number of scans. */
if (num_scans > devpriv->ao_scan_count)
num_scans = devpriv->ao_scan_count;
- if (devpriv->ao_scan_count == 0) {
+ if (devpriv->ao_scan_count == 0)
/* End of acquisition. */
events |= COMEDI_CB_EOA;
- }
}
if (events == 0) {
/* Check for FIFO underrun. */
@@ -1287,7 +1278,7 @@ static int pci230_handle_ao_fifo(struct comedi_device *dev,
if (num_scans > room)
num_scans = room;
/* Process scans. */
- for (n = 0; n < num_scans; n++) {
+ for (n = 0; n < num_scans; n++)
for (i = 0; i < cmd->chanlist_len; i++) {
unsigned short datum;
@@ -1295,7 +1286,6 @@ static int pci230_handle_ao_fifo(struct comedi_device *dev,
pci230_ao_write_fifo(dev, datum,
CR_CHAN(cmd->chanlist[i]));
}
- }
events |= COMEDI_CB_EOS | COMEDI_CB_BLOCK;
if (cmd->stop_src == TRIG_COUNT) {
devpriv->ao_scan_count -= num_scans;
@@ -1390,10 +1380,9 @@ static void pci230_ao_start(struct comedi_device *dev,
/* Preload FIFO data. */
run = pci230_handle_ao_fifo(dev, s);
comedi_event(dev, s);
- if (!run) {
+ if (!run)
/* Stopped. */
return;
- }
/* Set scan trigger source. */
switch (cmd->scan_begin_src) {
case TRIG_TIMER:
@@ -1401,13 +1390,12 @@ static void pci230_ao_start(struct comedi_device *dev,
break;
case TRIG_EXT:
/* Trigger on EXTTRIG/EXTCONVCLK pin. */
- if ((cmd->scan_begin_arg & CR_INVERT) == 0) {
+ if ((cmd->scan_begin_arg & CR_INVERT) == 0)
/* +ve edge */
scantrig = PCI230P2_DAC_TRIG_EXTP;
- } else {
+ else
/* -ve edge */
scantrig = PCI230P2_DAC_TRIG_EXTN;
- }
break;
case TRIG_INT:
scantrig = PCI230P2_DAC_TRIG_SW;
@@ -1480,11 +1468,10 @@ static int pci230_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/* Get the command. */
struct comedi_cmd *cmd = &s->async->cmd;
- if (cmd->scan_begin_src == TRIG_TIMER) {
+ if (cmd->scan_begin_src == TRIG_TIMER)
/* Claim Z2-CT1. */
if (!get_one_resource(dev, RES_Z2CT1, OWNER_AOCMD))
return -EBUSY;
- }
/* Get number of scans required. */
if (cmd->stop_src == TRIG_COUNT)
@@ -1670,14 +1657,13 @@ static int pci230_ai_check_chanlist(struct comedi_device *dev,
* be invisible to software). The first one doesn't seem to have
* the bug, but the second one does, and we can't tell them apart!
*/
- if (devpriv->hwver > 0 && devpriv->hwver < 4) {
+ if (devpriv->hwver > 0 && devpriv->hwver < 4)
if (subseq_len > 1 && CR_CHAN(cmd->chanlist[0])) {
dev_info(dev->class_dev,
"amplc_pci230: ai_cmdtest: Buggy PCI230+/260+ h/w version %u requires first channel of multi-channel sequence to be 0 (corrected in h/w version 4)\n",
devpriv->hwver);
return -EINVAL;
}
- }
return 0;
}
@@ -1695,7 +1681,7 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_INT);
tmp = TRIG_FOLLOW | TRIG_TIMER | TRIG_INT;
- if ((thisboard->have_dio) || (thisboard->min_hwver > 0)) {
+ if ((thisboard->have_dio) || (thisboard->min_hwver > 0))
/*
* Unfortunately, we cannot trigger a scan off an external
* source on the PCI260 board, since it uses the PPIC0 (DIO)
@@ -1703,7 +1689,6 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
* we can use the EXTTRIG/EXTCONVCLK input on pin 17 instead.
*/
tmp |= TRIG_EXT;
- }
err |= cfc_check_trigger_src(&cmd->scan_begin_src, tmp);
err |= cfc_check_trigger_src(&cmd->convert_src,
TRIG_TIMER | TRIG_INT | TRIG_EXT);
@@ -1749,26 +1734,24 @@ static int pci230_ai_cmdtest(struct comedi_device *dev,
if (cmd->convert_src == TRIG_TIMER) {
unsigned int max_speed_ai;
- if (devpriv->hwver == 0) {
+ if (devpriv->hwver == 0)
/*
* PCI230 or PCI260. Max speed depends whether
* single-ended or pseudo-differential.
*/
- if (cmd->chanlist && (cmd->chanlist_len > 0)) {
+ if (cmd->chanlist && (cmd->chanlist_len > 0))
/* Peek analogue reference of first channel. */
if (CR_AREF(cmd->chanlist[0]) == AREF_DIFF)
max_speed_ai = MAX_SPEED_AI_DIFF;
else
max_speed_ai = MAX_SPEED_AI_SE;
- } else {
+ else
/* No channel list. Assume single-ended. */
max_speed_ai = MAX_SPEED_AI_SE;
- }
- } else {
+ else
/* PCI230+ or PCI260+. */
max_speed_ai = MAX_SPEED_AI_PLUS;
- }
err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
max_speed_ai);
@@ -1895,32 +1878,27 @@ static void pci230_ai_update_fifo_trigger_level(struct comedi_device *dev,
unsigned short triglev;
unsigned short adccon;
- if (cmd->flags & TRIG_WAKE_EOS) {
+ if (cmd->flags & TRIG_WAKE_EOS)
/* Wake at end of scan. */
wake = scanlen - devpriv->ai_scan_pos;
- } else {
- if (cmd->stop_src != TRIG_COUNT ||
- devpriv->ai_scan_count >= PCI230_ADC_FIFOLEVEL_HALFFULL ||
- scanlen >= PCI230_ADC_FIFOLEVEL_HALFFULL) {
- wake = PCI230_ADC_FIFOLEVEL_HALFFULL;
- } else {
- wake = (devpriv->ai_scan_count * scanlen) -
- devpriv->ai_scan_pos;
- }
- }
+ else if (cmd->stop_src != TRIG_COUNT ||
+ devpriv->ai_scan_count >= PCI230_ADC_FIFOLEVEL_HALFFULL ||
+ scanlen >= PCI230_ADC_FIFOLEVEL_HALFFULL)
+ wake = PCI230_ADC_FIFOLEVEL_HALFFULL;
+ else
+ wake = (devpriv->ai_scan_count * scanlen) -
+ devpriv->ai_scan_pos;
if (wake >= PCI230_ADC_FIFOLEVEL_HALFFULL) {
triglev = PCI230_ADC_INT_FIFO_HALF;
- } else {
- if ((wake > 1) && (devpriv->hwver > 0)) {
- /* PCI230+/260+ programmable FIFO interrupt level. */
- if (devpriv->adcfifothresh != wake) {
- devpriv->adcfifothresh = wake;
- outw(wake, dev->iobase + PCI230P_ADCFFTH);
- }
- triglev = PCI230P_ADC_INT_FIFO_THRESH;
- } else {
- triglev = PCI230_ADC_INT_FIFO_NEMPTY;
+ } else if ((wake > 1) && (devpriv->hwver > 0)) {
+ /* PCI230+/260+ programmable FIFO interrupt level. */
+ if (devpriv->adcfifothresh != wake) {
+ devpriv->adcfifothresh = wake;
+ outw(wake, dev->iobase + PCI230P_ADCFFTH);
}
+ triglev = PCI230P_ADC_INT_FIFO_THRESH;
+ } else {
+ triglev = PCI230_ADC_INT_FIFO_NEMPTY;
}
adccon = (devpriv->adccon & ~PCI230_ADC_INT_FIFO_MASK) | triglev;
if (adccon != devpriv->adccon) {
@@ -2013,14 +1991,12 @@ static void pci230_ai_stop(struct comedi_device *dev,
if (!started)
return;
cmd = &s->async->cmd;
- if (cmd->convert_src == TRIG_TIMER) {
+ if (cmd->convert_src == TRIG_TIMER)
/* Stop conversion rate generator. */
pci230_cancel_ct(dev, 2);
- }
- if (cmd->scan_begin_src != TRIG_FOLLOW) {
+ if (cmd->scan_begin_src != TRIG_FOLLOW)
/* Stop scan period monostable. */
pci230_cancel_ct(dev, 0);
- }
spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
/*
* Disable ADC interrupt and wait for interrupt routine to finish
@@ -2085,24 +2061,21 @@ static void pci230_ai_start(struct comedi_device *dev,
conv = PCI230_ADC_TRIG_Z2CT2;
break;
case TRIG_EXT:
- if (cmd->convert_arg & CR_EDGE) {
- if ((cmd->convert_arg & CR_INVERT) == 0) {
+ if (cmd->convert_arg & CR_EDGE)
+ if ((cmd->convert_arg & CR_INVERT) == 0)
/* Trigger on +ve edge. */
conv = PCI230_ADC_TRIG_EXTP;
- } else {
+ else
/* Trigger on -ve edge. */
conv = PCI230_ADC_TRIG_EXTN;
- }
- } else {
+ else
/* Backwards compatibility. */
- if (cmd->convert_arg) {
+ if (cmd->convert_arg)
/* Trigger on +ve edge. */
conv = PCI230_ADC_TRIG_EXTP;
- } else {
+ else
/* Trigger on -ve edge. */
conv = PCI230_ADC_TRIG_EXTN;
- }
- }
break;
case TRIG_INT:
/*
@@ -2127,19 +2100,18 @@ static void pci230_ai_start(struct comedi_device *dev,
/* Update timer gates. */
unsigned char zgat;
- if (cmd->scan_begin_src != TRIG_FOLLOW) {
+ if (cmd->scan_begin_src != TRIG_FOLLOW)
/*
* Conversion timer CT2 needs to be gated by
* inverted output of monostable CT2.
*/
zgat = GAT_CONFIG(2, GAT_NOUTNM2);
- } else {
+ else
/*
* Conversion timer CT2 needs to be gated on
* continuously.
*/
zgat = GAT_CONFIG(2, GAT_VCC);
- }
outb(zgat, devpriv->iobase1 + PCI230_ZGAT_SCE);
if (cmd->scan_begin_src != TRIG_FOLLOW) {
/* Set monostable CT0 trigger source. */
@@ -2269,10 +2241,9 @@ static void pci230_handle_ai(struct comedi_device *dev,
/* Read PCI230+/260+ ADC FIFO level. */
fifoamount =
inw(dev->iobase + PCI230P_ADCFFLEV);
- if (fifoamount == 0) {
+ if (fifoamount == 0)
/* Shouldn't happen. */
break;
- }
} else {
fifoamount = 1;
}
@@ -2293,22 +2264,20 @@ static void pci230_handle_ai(struct comedi_device *dev,
async->events |= COMEDI_CB_EOS;
}
}
- if (cmd->stop_src == TRIG_COUNT && devpriv->ai_scan_count == 0) {
+ if (cmd->stop_src == TRIG_COUNT && devpriv->ai_scan_count == 0)
/* End of acquisition. */
events |= COMEDI_CB_EOA;
- } else {
+ else
/* More samples required, tell Comedi to block. */
events |= COMEDI_CB_BLOCK;
- }
async->events |= events;
if (async->events & (COMEDI_CB_EOA | COMEDI_CB_ERROR |
- COMEDI_CB_OVERFLOW)) {
+ COMEDI_CB_OVERFLOW))
/* disable hardware conversions */
pci230_ai_stop(dev, s);
- } else {
+ else
/* update FIFO interrupt trigger level */
pci230_ai_update_fifo_trigger_level(dev, s);
- }
}
static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
@@ -2335,10 +2304,9 @@ static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (cmd->scan_begin_src != TRIG_FOLLOW) {
/* Using Z2-CT0 monostable to gate Z2-CT2 conversion timer */
res_mask |= (1U << RES_Z2CT0);
- if (cmd->scan_begin_src == TRIG_TIMER) {
+ if (cmd->scan_begin_src == TRIG_TIMER)
/* Using Z2-CT1 for scan frequency */
res_mask |= (1U << RES_Z2CT1);
- }
}
/* Claim resources. */
if (!get_resources(dev, res_mask, OWNER_AICMD))
@@ -2397,19 +2365,18 @@ static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
range = CR_RANGE(cmd->chanlist[i]);
if (diff) {
gainshift = 2 * chan;
- if (devpriv->hwver == 0) {
+ if (devpriv->hwver == 0)
/*
* Original PCI230/260 expects both inputs of
* the differential channel to be enabled.
*/
adcen |= 3 << gainshift;
- } else {
+ else
/*
* PCI230+/260+ expects only one input of the
* differential channel to be enabled.
*/
adcen |= 1 << gainshift;
- }
} else {
gainshift = (chan & ~1);
adcen |= 1 << chan;
@@ -2721,7 +2688,7 @@ static int pci230_attach_common(struct comedi_device *dev,
return -EIO;
}
if (devpriv->hwver > 0) {
- if (!thisboard->have_dio) {
+ if (!thisboard->have_dio)
/*
* No DIO ports. Route counters' external gates
* to the EXTTRIG signal (PCI260+ pin 17).
@@ -2730,12 +2697,10 @@ static int pci230_attach_common(struct comedi_device *dev,
* on PCI260[+].)
*/
extfunc |= PCI230P_EXTFUNC_GAT_EXTTRIG;
- }
if ((thisboard->ao_chans > 0) &&
- (devpriv->hwver >= 2)) {
+ (devpriv->hwver >= 2))
/* Enable DAC FIFO functionality. */
extfunc |= PCI230P2_EXTFUNC_DACFIFO;
- }
}
outw(extfunc, dev->iobase + PCI230P_EXTFUNC);
if (extfunc & PCI230P2_EXTFUNC_DACFIFO) {
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/