Re: [PATCH 00/15] atmel_mxt_ts - device tree, bootloader, etc

[Nick Dyer]

On 29/07/14 17:16, Stephen Warren wrote:
> I then tried updating the firmware. This didn't work at all.
> 
> First I tried via mxt-app:
> 
>> root@localhost:~# ./obp-utils/mxt-app -d i2c-dev:1-004b --flash
>> 130.1_1.0.170.bin
>> Version:1.16-65-g0a4c
>> Opening firmware file 130.1_1.0.170.bin
>> Registered i2c-dev adapter:1 address:0x4b
>> Chip detected
>> Current firmware version: 1.0.AA
>> Skipping version check
>> Resetting in bootloader mode
>> Registered i2c-dev adapter:1 address:0x25
>> Error Remote I/O error (121) reading from i2c
>> Bootloader read failure
>> Bootloader not found
> 
> Then I power-cycled and tried via the atmel_mxt_ts modules' sysfs files:
> 
>> root@localhost:~# echo 1 >
>> /sys/devices/soc0/7000c400.i2c/i2c-1/1-004b/update_fw
>> [   38.495420] atmel_mxt_ts 1-004b: mxt_bootloader_read: i2c recv failed
>> (-121)
>> [   38.506208] atmel_mxt_ts 1-004b: mxt_bootloader_read: i2c recv failed
>> (-121)
>> [   38.513836] atmel_mxt_ts 1-004b: The firmware update failed(-121)
>> -bash: echo: write error: Remote I/O error

OK - that's the same error in both cases, it has tried to switch the device
into bootloader mode, however it is not responding on the bootloader I2C
address.

Couple of things to check:
- is the device in deep sleep mode when you run the mxt-app command? can
you try doing "mxt-app [device] -W -T7 FFFF" which will make sure it is
definitely not sleeping first.
- if you do "mxt-app [device] -i" straight after the --flash failure, does
it respond (which would mean it hasn't actioned the reset-into-bootloader
command)

> I also found that removing the module (even without attempting a FW update)
> yields:
> 
> After attempted FW update via sysfs:
> 
>> root@localhost:~# rmmod ./atmel_mxt_ts.ko
>> [   81.995672] Unable to handle kernel NULL pointer dereference at virtual address 00000364

Not good. It's trying to free an input device which isn't registered at
that point. In a later patch in my series I add a guard around that
(mxt_free_input_device):
https://github.com/ndyer/linux/commit/bb4800ff8c185
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/