[PATCH 4/5] ARM: dts: Take the mmc slot node out of rk3288-evb

[Doug Anderson]

In Jaehoon's (mmc: dw_mmc: replace "disable-wp" from slot's quirk to
host's quirk) the slot node is no longer used.  Remove it.

Note that if Jaehoon's patch lands before my (ARM: dts: Enable emmc
and sdmmc on the rk3288-evb boards) then this could be squashed into
the later.

Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/rk3288-evb.dtsi | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index ec580fa..b69008f 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -41,17 +41,13 @@
 	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	disable-wp;
 	mmc-ddr-1_8v;
 	non-removable;
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
 	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		disable-wp;
-	};
 };
 
 &sdmmc {
@@ -59,15 +55,11 @@
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
+	disable-wp;			/* wp not hooked up */
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	status = "okay";
-
-	slot@0 {
-		reg = <0>;
-		disable-wp;		/* wp not hooked up */
-	};
 };
 
 &i2c0 {
-- 
2.0.0.526.g5318336

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/