[iio:dummy] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0

From: Fengguang Wu
Date: Wed Jul 30 2014 - 00:10:41 EST

Next message: Eric W. Biederman: "Re: [PATCH 11/11] seccomp: Add tgid and tid into seccomp_data"
Previous message: Fengguang Wu: "[x86] BUG: unable to handle kernel paging request at ffff880012770000"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Greetings,

0day kernel testing robot got the below dmesg and the first bad commit is

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit 9ad2e2e1d6506252f31a142a9b04121992af25e3
Author: Jonathan Cameron <jic23@xxxxxxxxx>
AuthorDate: Fri Oct 14 16:34:15 2011 +0100
Commit: Greg Kroah-Hartman <gregkh@xxxxxxx>
CommitDate: Mon Oct 17 15:36:30 2011 -0700

staging:iio:dummy Add buffered reading support

Very simple buffered reading. Did not provide a trigger as
the sysfs trigger already meets that requirement.

Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

===================================================
PARENT COMMIT NOT CLEAN. LOOK OUT FOR WRONG BISECT!
===================================================
Attached dmesg for the parent commit, too, to help confirm whether it is a noise error.

+-------------------------------------------------------+------------+------------+
| | e6477000fc | 9ad2e2e1d6 |
+-------------------------------------------------------+------------+------------+
| boot_successes | 774 | 0 |
| boot_failures | 426 | 300 |
| BUG:kernel_boot_hang | 426 | 0 |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference | 0 | 300 |
| Oops | 0 | 300 |
| RIP:iio_buffer_register | 0 | 300 |
| Kernel_panic-not_syncing:Attempted_to_kill_init | 0 | 300 |
| backtrace:iio_dummy_init | 0 | 300 |
| backtrace:async_page_fault | 0 | 300 |
+-------------------------------------------------------+------------+------------+

[ 1.369812] device-mapper: multipath service-time: version 0.2.0 loaded
[ 1.370969] Bluetooth: Virtual HCI driver ver 1.3
[ 1.371923] cpuidle: using governor ladder
[ 1.374155] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
[ 1.375337] IP: [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376212] PGD 0
[ 1.376515] Oops: 0000 [#1] DEBUG_PAGEALLOC
[ 1.376709] CPU 0
[ 1.376709] Pid: 1, comm: swapper Not tainted 3.1.0-rc4-01470-g9ad2e2e #10
[ 1.376709] RIP: 0010:[<ffffffff81a111de>] [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376709] RSP: 0018:ffff880013425e50 EFLAGS: 00010246
[ 1.376709] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 1.376709] RDX: 0000000000000005 RSI: ffffffff82a77640 RDI: ffff880011be3008
[ 1.376709] RBP: ffff880013425ec0 R08: 0000000000000000 R09: 0000000000000000
[ 1.376709] R10: 0000000000000001 R11: 0000000000000002 R12: ffff880011be3008
[ 1.376709] R13: 00000000fffffff4 R14: 0000000000000000 R15: ffff880011be3008
[ 1.376709] FS: 0000000000000000(0000) GS:ffffffff82652000(0000) knlGS:0000000000000000
[ 1.376709] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1.376709] CR2: 00000000000000e0 CR3: 000000000260d000 CR4: 00000000000006b0
[ 1.376709] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.376709] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1.376709] Process swapper (pid: 1, threadinfo ffff880013424000, task ffff880013422000)
[ 1.376709] Stack:
[ 1.376709] 0000000000000000 0000000000000000 ffff880013425e90 ffffffff81158c61
[ 1.376709] ffff880013425ea0 ffff880011be3668 ffffffff823f05d3 ffffffff82a77640
[ 1.376709] ffff880013425ec0 0000000000000000 ffff880011be3008 00000000fffffff4
[ 1.376709] Call Trace:
[ 1.376709] [<ffffffff81158c61>] ? debug_mutex_init+0x41/0x60
[ 1.376709] [<ffffffff82f39dc6>] iio_dummy_init+0x1a5/0x272
[ 1.376709] [<ffffffff82f39c21>] ? iio_init+0xe6/0xe6
[ 1.376709] [<ffffffff82ee3420>] do_one_initcall+0xd2/0x27b
[ 1.376709] [<ffffffff82ee36fa>] kernel_init+0x131/0x243
[ 1.376709] [<ffffffff81c65004>] kernel_thread_helper+0x4/0x10
[ 1.376709] [<ffffffff81c637b0>] ? retint_restore_args+0x13/0x13
[ 1.376709] [<ffffffff82ee35c9>] ? do_one_initcall+0x27b/0x27b
[ 1.376709] [<ffffffff81c65000>] ? gs_change+0x13/0x13
[ 1.376709] Code: e5 41 57 41 56 41 55 41 54 53 48 83 ec 48 e8 7a 2c 25 00 4c 8b b7 48 04 00 00 48 83 05 ab e4 1b 02 01 31 c0 49 89 ff 48 89 75 c8
[ 1.376709] 83 be e0 00 00 00 00 0f 95 c0 48 63 c8 48 83 c1 02 48 83 04
[ 1.376709] RIP [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376709] RSP <ffff880013425e50>
[ 1.376709] CR2: 00000000000000e0
[ 1.408095] ---[ end trace 45d5343e36d694cc ]---
[ 1.408926] Kernel panic - not syncing: Attempted to kill init!

git bisect start v3.2 v3.1 --
git bisect bad 6aaf05f472c97ebceff47d9eef464574f1a55727 # 22:21 0- 213 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
git bisect bad 3f8ddb032afa729d4bad1bf2965d3ec068de6b72 # 22:25 0- 71 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock
git bisect bad 37be944a0270402f9cda291a930b0286f6dc92f5 # 22:28 0- 210 Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linux
git bisect bad 3cfef9524677a4ecb392d6fbffe6ebce6302f1d4 # 22:33 0- 214 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
git bisect good 4e7e2a2008f5d8c49791c412849d5b0232d39bb3 # 22:58 300+ 95 Merge branch 'for-linus' of git://opensource.wolfsonmicro.com/regmap
git bisect good 7670c7010c7b367ca40c3aba02afb36149764a6e # 23:16 300+ 106 Merge branch 'for-linus' of git://github.com/gregungerer/m68knommu
git bisect good efb8d21b2c6db3497655cc6a033ae8a9883e4063 # 23:24 300+ 140 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
git bisect bad 37d96c28ecf0af1215bb6bbf580dbb1fabb5a6ec # 23:32 0- 32 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
git bisect bad aa77677e0a288e08073620db5d2a31df83ca4788 # 23:38 0- 6 Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
git bisect good c909ebbd0dcf19c617408c2cfde56c4bbd4f6cb4 # 23:52 300+ 0 staging: hv: add newline to log messages in netvsc
git bisect good bb7410b2fd325d889f674d2456ce953c519fb774 # 00:07 300+ 35 staging: brcm80211: removed likely/unlikely calls
git bisect good b2d62733e6ea427921e201269c1b55bca3a87936 # 00:17 300+ 73 staging: brcm80211: removed redundant code from brcms_c_set_gmode
git bisect good 39f10bf18c80c98d9fec376beabe80b9c59c7498 # 00:36 300+ 137 staging: xgifb: eliminate XGIfb_CRT2_write_enable variable
git bisect bad e63abd0a1b757f6433869c13da4cf1b07fc14284 # 00:45 0- 49 iio: Spell fix - consistent use of Converter - no functional changes
git bisect good b55e073e95804b022075e464b9cf82e269fd457a # 01:00 300+ 66 staging/easycap: kill timeval members of easycap struct
git bisect bad 9ad2e2e1d6506252f31a142a9b04121992af25e3 # 01:05 0- 148 staging:iio:dummy Add buffered reading support
git bisect good 3e2c96eab9278317569e2baf165f71042c927712 # 01:14 300+ 104 staging:iio: gpio build dependency fixing
git bisect good 9c95e01e84e31178b9a83b683a501ed76166c259 # 01:20 300+ 89 staging:iio:adc:max1363 incorrect allocation of available_scanmasks
git bisect good e6477000fced2c961c26fa42845bd388fdf95e79 # 01:25 300+ 61 staging:iio:dummy Add event support + fake event generator
# first bad commit: [9ad2e2e1d6506252f31a142a9b04121992af25e3] staging:iio:dummy Add buffered reading support
git bisect good e6477000fced2c961c26fa42845bd388fdf95e79 # 01:32 900+ 426 staging:iio:dummy Add event support + fake event generator
git bisect bad eee4ca37c17a74bc97c899b0e68a36ff0f17392a # 01:32 0- 26 0day head guard for 'devel-hourly-2014072206'
git bisect bad 15ba2236f3556fc01b9ca91394465152b5ea74b6 # 01:37 283- 180 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
git bisect bad 594a8bbcd415c795f54ee8b07f64ba313cc6074e # 01:44 1- 6 Add linux-next specific files for 20140721

This script may reproduce the error.

----------------------------------------------------------------------------
#!/bin/bash

kernel=$1
initrd=yocto-minimal-x86_64.cgz

wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd

kvm=(
qemu-system-x86_64
-cpu kvm64
-enable-kvm
-kernel $kernel
-initrd $initrd
-m 320
-smp 1
-net nic,vlan=1,model=e1000
-net user,vlan=1
-boot order=nc
-no-reboot
-watchdog i6300esb
-rtc base=localtime
-serial stdio
-display none
-monitor null
)

append=(
hung_task_panic=1
earlyprintk=ttyS0,115200
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
panic=10
softlockup_panic=1
nmi_watchdog=panic
prompt_ramdisk=0
console=ttyS0,115200
console=tty0
vga=normal
root=/dev/ram0
rw
drbd.minor_count=8
)

"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------

Thanks,
Fengguang
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Linux version 3.1.0-rc4-01470-g9ad2e2e (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #10 Wed Jul 23 09:04:20 CST 2014
[ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:9ad2e2e1d6506252f31a142a9b04121992af25e3:bisect-linux1/.vmlinuz-9ad2e2e1d6506252f31a142a9b04121992af25e3-20140723090438-257-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/9ad2e2e1d6506252f31a142a9b04121992af25e3/vmlinuz-3.1.0-rc4-01470-g9ad2e2e drbd.minor_count=8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000013ffe000 (usable)
[ 0.000000] BIOS-e820: 0000000013ffe000 - 0000000014000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x13ffe max_arch_pfn = 0x400000000
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [ffff8800000f0ed0] f0ed0
[ 0.000000] mpc: f0ee0-f0fb0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-0000000013ffe000
[ 0.000000] 0000000000 - 0013ffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 13ffe000 @ 13c44000-13ce6000
[ 0.000000] RAMDISK: 13ce6000 - 13ff0000
[ 0.000000] ACPI: RSDP 00000000000f0d50 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0000000013fffbc1 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0000000013fff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0000000013ffe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0000000013ffe000 00040
[ 0.000000] ACPI: SSDT 0000000013fff234 008DD (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0000000013fffb11 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0000000013fffb89 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000)
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:2663641, boot clock
[ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880012e00000-ffff8800133fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00013ffe
[ 0.000000] On node 0 totalpages: 81805
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1064 pages used for memmap
[ 0.000000] DMA32 zone: 76758 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 2662d00
[ 0.000000] Allocating PCI resources starting at 14000000 (gap: 14000000:eaffc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80680
[ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:9ad2e2e1d6506252f31a142a9b04121992af25e3:bisect-linux1/.vmlinuz-9ad2e2e1d6506252f31a142a9b04121992af25e3-20140723090438-257-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/9ad2e2e1d6506252f31a142a9b04121992af25e3/vmlinuz-3.1.0-rc4-01470-g9ad2e2e drbd.minor_count=8
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Memory: 270932k/327672k available (12700k kernel code, 452k absent, 56288k reserved, 18901k data, 628k init)
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 2693.508 MHz processor.
[ 0.006666] Calibrating delay loop (skipped) preset value.. 5389.47 BogoMIPS (lpj=8978360)
[ 0.006666] pid_max: default: 32768 minimum: 301
[ 0.006666] Mount-cache hash table entries: 256
[ 0.007128] CPU: Intel Common KVM processor stepping 01
[ 0.011565] ACPI: Core revision 20110623
[ 0.024139] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.026145] Getting VERSION: 1050014
[ 0.026677] Getting VERSION: 1050014
[ 0.027167] Getting ID: 0
[ 0.027537] Getting ID: ff000000
[ 0.028006] Getting LVT0: 8700
[ 0.028425] Getting LVT1: 8400
[ 0.028875] enabled ExtINT on CPU#0
[ 0.030206] ENABLING IO-APIC IRQs
[ 0.030668] init IO_APIC IRQs
[ 0.031086] apic 0 pin 0 not connected
[ 0.031647] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.032735] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.033374] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.034481] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.035566] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.036704] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.037809] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.038894] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.040039] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.041148] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.042260] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.043371] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.044499] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.045605] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.046705] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.047825] apic 0 pin 16 not connected
[ 0.048363] apic 0 pin 17 not connected
[ 0.048889] apic 0 pin 18 not connected
[ 0.050006] apic 0 pin 19 not connected
[ 0.050551] apic 0 pin 20 not connected
[ 0.051100] apic 0 pin 21 not connected
[ 0.051645] apic 0 pin 22 not connected
[ 0.052177] apic 0 pin 23 not connected
[ 0.052860] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053338] Using local APIC timer interrupts.
[ 0.053341] calibrating APIC timer ...
[ 0.056663] ... lapic delta = 6249708
[ 0.056663] ... PM-Timer delta = 357978
[ 0.056663] ... PM-Timer result ok
[ 0.056663] ..... delta 6249708
[ 0.056663] ..... mult: 268440417
[ 0.056663] ..... calibration result: 3333177
[ 0.056663] ..... CPU clock speed is 2693.2997 MHz.
[ 0.056663] ..... host bus clock speed is 1000.0177 MHz.
[ 0.056663] xor: automatically using best checksumming function: generic_sse
[ 0.070001] generic_sse: 12176.400 MB/sec
[ 0.070396] xor: using function: generic_sse (12176.400 MB/sec)
[ 0.070927] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.072221] print_constraints: dummy:
[ 0.072829] NET: Registered protocol family 16
[ 0.073723] ACPI: bus type pci registered
[ 0.074152] PCI: Using configuration type 1 for base access
[ 0.083813] bio: create slab <bio-0> at 0
[ 0.140010] raid6: int64x1 2942 MB/s
[ 0.196665] raid6: int64x2 3182 MB/s
[ 0.253337] raid6: int64x4 2272 MB/s
[ 0.310003] raid6: int64x8 2184 MB/s
[ 0.366666] raid6: sse2x1 3052 MB/s
[ 0.423327] raid6: sse2x2 3618 MB/s
[ 0.479988] raid6: sse2x4 1838 MB/s
[ 0.480357] raid6: using algorithm sse2x2 (3618 MB/s)
[ 0.481171] ACPI: Added _OSI(Module Device)
[ 0.481562] ACPI: Added _OSI(Processor Device)
[ 0.481964] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.482398] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.486151] ACPI: EC: Look up EC in DSDT
[ 0.499909] ACPI: Interpreter enabled
[ 0.499973] ACPI: (supports S0 S3 S5)
[ 0.500450] ACPI: Using IOAPIC for interrupt routing
[ 0.530893] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.533116] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.534827] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.536643] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xadff]
[ 0.537641] pci_root PNP0A03:00: host bridge window [io 0xae0f-0xaeff]
[ 0.538654] pci_root PNP0A03:00: host bridge window [io 0xaf20-0xafdf]
[ 0.539630] pci_root PNP0A03:00: host bridge window [io 0xafe4-0xffff]
[ 0.539976] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.541088] pci_root PNP0A03:00: host bridge window [mem 0x14000000-0xfebfffff]
[ 0.542372] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.543850] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.545435] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.549976] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f]
[ 0.552104] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.553757] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.554806] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.555677] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.557098] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 0.558608] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
[ 0.563747] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.564475] pci 0000:00:03.0: [8086:100e] type 0 class 0x000200
[ 0.565764] pci 0000:00:03.0: reg 10: [mem 0xfebc0000-0xfebdffff]
[ 0.567020] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f]
[ 0.571064] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.571752] pci 0000:00:04.0: [8086:25ab] type 0 class 0x000880
[ 0.572691] pci 0000:00:04.0: reg 10: [mem 0xfebf1000-0xfebf100f]
[ 0.575934] pci_bus 0000:00: on NUMA node 0
[ 0.576325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.582211] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.612340] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.613250] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.613785] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.614677] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.615418] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.617601] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.618338] vgaarb: loaded
[ 0.618589] vgaarb: bridge control possible 0000:00:02.0
[ 0.619569] i2c-core: driver [aat2870] using legacy suspend method
[ 0.619965] i2c-core: driver [aat2870] using legacy resume method
[ 0.620864] SCSI subsystem initialized
[ 0.621387] libata version 3.00 loaded.
[ 0.622164] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.622744] PCI: Using ACPI for IRQ routing
[ 0.623300] PCI: pci_cache_line_size set to 64 bytes
[ 0.623945] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.624513] reserve RAM buffer: 0000000013ffe000 - 0000000013ffffff
[ 0.625679] Bluetooth: Core ver 2.16
[ 0.626106] NET: Registered protocol family 31
[ 0.626513] Bluetooth: HCI device and connection manager initialized
[ 0.626694] Bluetooth: HCI socket layer initialized
[ 0.627141] NET: Registered protocol family 8
[ 0.627540] NET: Registered protocol family 20
[ 0.628113] Switching to clocksource kvm-clock
[ 0.629189] Warning: could not register all branches stats
[ 0.629699] Warning: could not register annotated branches stats
[ 0.658114] pnp: PnP ACPI init
[ 0.658696] ACPI: bus type pnp registered
[ 0.659752] pnp 00:00: [bus 00-ff]
[ 0.660315] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.660880] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.661529] pnp 00:00: [io 0x0d00-0xadff window]
[ 0.662169] pnp 00:00: [io 0xae0f-0xaeff window]
[ 0.662812] pnp 00:00: [io 0xaf20-0xafdf window]
[ 0.663540] pnp 00:00: [io 0xafe4-0xffff window]
[ 0.664188] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.664937] pnp 00:00: [mem 0x14000000-0xfebfffff window]
[ 0.665970] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.667067] pnp 00:01: [io 0x0070-0x0071]
[ 0.667656] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.668711] pnp 00:01: [irq 8]
[ 0.668993] pnp 00:01: [io 0x0072-0x0077]
[ 0.669493] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.670242] pnp 00:02: [io 0x0060]
[ 0.670572] pnp 00:02: [io 0x0064]
[ 0.670913] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.671640] pnp 00:02: [irq 1]
[ 0.672064] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.672724] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.673545] pnp 00:03: [irq 12]
[ 0.673955] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.674775] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.675157] pnp 00:04: [io 0x03f7]
[ 0.675482] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.676211] pnp 00:04: [irq 6]
[ 0.676495] pnp 00:04: [dma 2]
[ 0.676985] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.677716] pnp 00:05: [io 0x0378-0x037f]
[ 0.678099] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.678827] pnp 00:05: [irq 7]
[ 0.679258] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.679982] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.680379] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.681115] pnp 00:06: [irq 4]
[ 0.681509] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.683223] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.683892] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.685065] pnp 00:08: [io 0xaf00-0xaf1f]
[ 0.685702] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.686317] pnp: PnP ACPI: found 9 devices
[ 0.686763] ACPI: ACPI bus type pnp unregistered
[ 0.694137] PCI: max bus depth: 0 pci_try_num: 1
[ 0.694573] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.695079] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff]
[ 0.695651] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff]
[ 0.696151] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf]
[ 0.696655] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff]
[ 0.697328] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
[ 0.698337] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff]
[ 0.699331] NET: Registered protocol family 1
[ 0.699861] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.700946] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.701888] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.702948] pci 0000:00:02.0: Boot video device
[ 0.703911] PCI: CLS 0 bytes, default 64
[ 0.704906] Unpacking initramfs...
[ 0.875994] debug: unmapping init memory ffff880013ce6000..ffff880013ff0000
[ 0.878864] kvm: no hardware support
[ 0.880681] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1
[ 0.881668] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.883782] Intel AES-NI instructions are not detected.
[ 0.884499] Intel PCLMULQDQ-NI instructions are not detected.
[ 0.885812] audit: initializing netlink socket (disabled)
[ 0.886798] type=2000 audit(1406048667.883:1): initialized
[ 0.891026] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.893517] VFS: Disk quotas dquot_6.5.2
[ 0.894082] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.895208] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.896359] NTFS driver 2.1.30 [Flags: R/W DEBUG].
[ 0.898417] JFS: nTxBlock = 2116, nTxLock = 16933
[ 0.901810] msgmni has been set to 529
[ 0.902690] alg: No test for cipher_null (cipher_null-generic)
[ 0.903896] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 0.904943] alg: No test for digest_null (digest_null-generic)
[ 0.905947] alg: No test for compress_null (compress_null-generic)
[ 0.910476] alg: No test for fcrypt (fcrypt-generic)
[ 0.925829] alg: No test for stdrng (krng)
[ 0.946889] NET: Registered protocol family 38
[ 0.947733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.948754] io scheduler noop registered (default)
[ 0.949404] io scheduler deadline registered
[ 0.949983] list_sort_test: start testing list_sort()
[ 0.954462] i2c-core: driver [adp8860_bl] using legacy suspend method
[ 0.955333] i2c-core: driver [adp8860_bl] using legacy resume method
[ 0.957309] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.958360] ACPI: Power Button [PWRF]
[ 0.959255] ACPI: acpi_idle registered with cpuidle
[ 0.961573] XENFS: not registering filesystem on non-xen platform
[ 0.962710] HDLC line discipline maxframe=4096
[ 0.963314] N_HDLC line discipline registered.
[ 0.964050] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 0.964800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.994665] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.025624] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.028321] Non-volatile memory driver v1.3
[ 1.029420] smapi::smapi_init, ERROR invalid usSmapiID
[ 1.030223] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 1.031446] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 1.032408] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 1.033459] ipmi message handler version 39.2
[ 1.034062] ipmi device interface
[ 1.034705] IPMI System Interface driver.
[ 1.035489] ipmi_si: Adding default-specified kcs state machine
[ 1.036320] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 1.037877] ipmi_si: Interface detection failed
[ 1.038599] ipmi_si: Adding default-specified smic state machine
[ 1.039569] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[ 1.041254] ipmi_si: Interface detection failed
[ 1.041996] ipmi_si: Adding default-specified bt state machine
[ 1.042869] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[ 1.044410] ipmi_si: Interface detection failed
[ 1.045450] ipmi_si: Unable to find any System Interface(s)
[ 1.046276] IPMI Watchdog: driver initialized
[ 1.047041] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 1.048156] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.049448] Hangcheck: Using getrawmonotonic().
[ 1.050382] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[ 1.051811] Uniform Multi-Platform E-IDE driver
[ 1.052662] ide-gd driver 1.18
[ 1.053248] ide-cd driver 5.00
[ 1.054456] Loading iSCSI transport class v2.0-870.
[ 1.057300] rdac: device handler registered
[ 1.058105] hp_sw: device handler registered
[ 1.058751] emc: device handler registered
[ 1.059347] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 1.060567] osst :I: Tape driver with OnStream support version 0.99.4
[ 1.060570] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 1.063002] SCSI Media Changer driver v0.25
[ 1.064213] osd: LOADED open-osd 0.2.0
[ 1.064936] Error: Driver 'pata_platform' is already registered, aborting...
[ 1.066852] SSFDC read-only Flash Translation layer
[ 1.067537] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.068458] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[ 1.069731] physmap-flash.0: failed to claim resource 0
[ 1.070652] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
[ 1.071705] slram: not enough parameters.
[ 1.077189] Spectra MTD driver
[ 1.077787] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 1.079069] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 1.080431] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 1.081689] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 1.082943] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 1.084300] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 1.085555] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit)
[ 1.086878] flash size: 128 MiB
[ 1.087314] page size: 512 bytes
[ 1.087765] OOB area size: 16 bytes
[ 1.088241] sector size: 16 KiB
[ 1.088682] pages number: 262144
[ 1.089124] pages per sector: 32
[ 1.089560] bus width: 8
[ 1.089917] bits in sector size: 14
[ 1.090509] bits in page size: 9
[ 1.090962] bits in OOB size: 4
[ 1.091386] flash size with OOB: 135168 KiB
[ 1.091957] page address bytes: 4
[ 1.092408] sector address bytes: 3
[ 1.092881] options: 0x62
[ 1.095356] Scanning device for bad blocks
[ 1.237428] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[ 1.240141] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[ 1.243074] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx>
[ 1.244872] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx>
[ 1.246429] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.248818] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.249565] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.341948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.353330] i2c /dev entries driver
[ 1.354133] i2c-parport-light: adapter type unspecified
[ 1.354855] Driver for 1-wire Dallas network protocol.
[ 1.356016] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 1.357506] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 1.359111] i2c-core: driver [max17040] using legacy suspend method
[ 1.360150] i2c-core: driver [max17040] using legacy resume method
[ 1.361420] md: raid1 personality registered for level 1
[ 1.362211] md: raid10 personality registered for level 10
[ 1.363007] md: raid6 personality registered for level 6
[ 1.363892] md: raid5 personality registered for level 5
[ 1.364661] md: raid4 personality registered for level 4
[ 1.365418] md: faulty personality registered for level -5
[ 1.366498] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx
[ 1.368040] device-mapper: multipath: version 1.3.0 loaded
[ 1.368872] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.369812] device-mapper: multipath service-time: version 0.2.0 loaded
[ 1.370969] Bluetooth: Virtual HCI driver ver 1.3
[ 1.371923] cpuidle: using governor ladder
[ 1.374155] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e0
[ 1.375337] IP: [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376212] PGD 0
[ 1.376515] Oops: 0000 [#1] DEBUG_PAGEALLOC
[ 1.376709] CPU 0
[ 1.376709] Pid: 1, comm: swapper Not tainted 3.1.0-rc4-01470-g9ad2e2e #10
[ 1.376709] RIP: 0010:[<ffffffff81a111de>] [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376709] RSP: 0018:ffff880013425e50 EFLAGS: 00010246
[ 1.376709] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 1.376709] RDX: 0000000000000005 RSI: ffffffff82a77640 RDI: ffff880011be3008
[ 1.376709] RBP: ffff880013425ec0 R08: 0000000000000000 R09: 0000000000000000
[ 1.376709] R10: 0000000000000001 R11: 0000000000000002 R12: ffff880011be3008
[ 1.376709] R13: 00000000fffffff4 R14: 0000000000000000 R15: ffff880011be3008
[ 1.376709] FS: 0000000000000000(0000) GS:ffffffff82652000(0000) knlGS:0000000000000000
[ 1.376709] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1.376709] CR2: 00000000000000e0 CR3: 000000000260d000 CR4: 00000000000006b0
[ 1.376709] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.376709] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1.376709] Process swapper (pid: 1, threadinfo ffff880013424000, task ffff880013422000)
[ 1.376709] Stack:
[ 1.376709] 0000000000000000 0000000000000000 ffff880013425e90 ffffffff81158c61
[ 1.376709] ffff880013425ea0 ffff880011be3668 ffffffff823f05d3 ffffffff82a77640
[ 1.376709] ffff880013425ec0 0000000000000000 ffff880011be3008 00000000fffffff4
[ 1.376709] Call Trace:
[ 1.376709] [<ffffffff81158c61>] ? debug_mutex_init+0x41/0x60
[ 1.376709] [<ffffffff82f39dc6>] iio_dummy_init+0x1a5/0x272
[ 1.376709] [<ffffffff82f39c21>] ? iio_init+0xe6/0xe6
[ 1.376709] [<ffffffff82ee3420>] do_one_initcall+0xd2/0x27b
[ 1.376709] [<ffffffff82ee36fa>] kernel_init+0x131/0x243
[ 1.376709] [<ffffffff81c65004>] kernel_thread_helper+0x4/0x10
[ 1.376709] [<ffffffff81c637b0>] ? retint_restore_args+0x13/0x13
[ 1.376709] [<ffffffff82ee35c9>] ? do_one_initcall+0x27b/0x27b
[ 1.376709] [<ffffffff81c65000>] ? gs_change+0x13/0x13
[ 1.376709] Code: e5 41 57 41 56 41 55 41 54 53 48 83 ec 48 e8 7a 2c 25 00 4c 8b b7 48 04 00 00 48 83 05 ab e4 1b 02 01 31 c0 49 89 ff 48 89 75 c8
[ 1.376709] 83 be e0 00 00 00 00 0f 95 c0 48 63 c8 48 83 c1 02 48 83 04
[ 1.376709] RIP [<ffffffff81a111de>] iio_buffer_register+0x2e/0x600
[ 1.376709] RSP <ffff880013425e50>
[ 1.376709] CR2: 00000000000000e0
[ 1.408095] ---[ end trace 45d5343e36d694cc ]---
[ 1.408926] Kernel panic - not syncing: Attempted to kill init!
[ 1.409767] Pid: 1, comm: swapper Tainted: G D 3.1.0-rc4-01470-g9ad2e2e #10
[ 1.410961] Call Trace:
[ 1.411338] [<ffffffff81c42549>] panic+0xd9/0x30b
[ 1.412045] [<ffffffff81102ed3>] do_exit+0xd43/0x1180
[ 1.412787] [<ffffffff810fe0e8>] ? kmsg_dump+0x168/0x1d0
[ 1.413669] [<ffffffff810fe02a>] ? kmsg_dump+0xaa/0x1d0
[ 1.414435] [<ffffffff8109daa1>] oops_end+0x191/0x1e0
[ 1.415184] [<ffffffff810cc1bf>] no_context+0x33f/0x5a0
[ 1.415956] [<ffffffff810cc5c5>] __bad_area_nosemaphore+0xd5/0x4c0
[ 1.416970] [<ffffffff811465f2>] ? sched_clock_local.constprop.2+0xc2/0x170
[ 1.417992] [<ffffffff810ccca9>] ? do_page_fault+0x289/0xe10
[ 1.418829] [<ffffffff810cc9cb>] bad_area_nosemaphore+0x1b/0x30
[ 1.419693] [<ffffffff810ccdfd>] do_page_fault+0x3dd/0xe10
[ 1.420568] [<ffffffff8123ee56>] ? slob_alloc.isra.7+0x2f6/0x530
[ 1.421417] [<ffffffff815e999a>] ? trace_hardirqs_off_thunk+0x3a/0x3c
[ 1.422317] [<ffffffff810c5df7>] do_async_page_fault+0x37/0xc0
[ 1.423130] [<ffffffff81c63a65>] async_page_fault+0x25/0x30
[ 1.424010] [<ffffffff81a111de>] ? iio_buffer_register+0x2e/0x600
[ 1.424856] [<ffffffff81158c61>] ? debug_mutex_init+0x41/0x60
[ 1.425653] [<ffffffff82f39dc6>] iio_dummy_init+0x1a5/0x272
[ 1.426417] [<ffffffff82f39c21>] ? iio_init+0xe6/0xe6
[ 1.427228] [<ffffffff82ee3420>] do_one_initcall+0xd2/0x27b
[ 1.428004] [<ffffffff82ee36fa>] kernel_init+0x131/0x243
[ 1.428747] [<ffffffff81c65004>] kernel_thread_helper+0x4/0x10
[ 1.429543] [<ffffffff81c637b0>] ? retint_restore_args+0x13/0x13
[ 1.430493] [<ffffffff82ee35c9>] ? do_one_initcall+0x27b/0x27b
[ 1.431302] [<ffffffff81c65000>] ? gs_change+0x13/0x13
[ 1.432035] Rebooting in 10 seconds..
Elapsed time: 5
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-s0-07220709/9ad2e2e1d6506252f31a142a9b04121992af25e3/vmlinuz-3.1.0-rc4-01470-g9ad2e2e -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:9ad2e2e1d6506252f31a142a9b04121992af25e3:bisect-linux1/.vmlinuz-9ad2e2e1d6506252f31a142a9b04121992af25e3-20140723090438-257-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/9ad2e2e1d6506252f31a142a9b04121992af25e3/vmlinuz-3.1.0-rc4-01470-g9ad2e2e drbd.minor_count=8' -initrd /kernel-tests/initrd/yocto-minimal-x86_64.cgz -m 320 -smp 1 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-ivb41-92 -serial file:/dev/shm/kboot/serial-yocto-ivb41-92 -daemonize -display none -monitor null
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Linux version 3.1.0-rc4-01469-ge647700 (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #12 Wed Jul 23 09:21:18 CST 2014
[ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:e6477000fced2c961c26fa42845bd388fdf95e79:bisect-linux1/.vmlinuz-e6477000fced2c961c26fa42845bd388fdf95e79-20140723092146-119-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/e6477000fced2c961c26fa42845bd388fdf95e79/vmlinuz-3.1.0-rc4-01469-ge647700 drbd.minor_count=8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000013ffe000 (usable)
[ 0.000000] BIOS-e820: 0000000013ffe000 - 0000000014000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x13ffe max_arch_pfn = 0x400000000
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [ffff8800000f0eb0] f0eb0
[ 0.000000] mpc: f0ec0-f0fa4
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-0000000013ffe000
[ 0.000000] 0000000000 - 0013ffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 13ffe000 @ 1289b000-1293d000
[ 0.000000] RAMDISK: 1293d000 - 13ff0000
[ 0.000000] ACPI: RSDP 00000000000f0d00 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0000000013fffc2a 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0000000013fff1c0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0000000013ffe040 01180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0000000013ffe000 00040
[ 0.000000] ACPI: SSDT 0000000013fff234 0093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0000000013fffb72 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0000000013fffbf2 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000)
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:2663641, boot clock
[ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880011a00000-ffff880011ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00013ffe
[ 0.000000] On node 0 totalpages: 81805
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1064 pages used for memmap
[ 0.000000] DMA32 zone: 76758 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 2662d00
[ 0.000000] Allocating PCI resources starting at 14000000 (gap: 14000000:eaffc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80680
[ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:e6477000fced2c961c26fa42845bd388fdf95e79:bisect-linux1/.vmlinuz-e6477000fced2c961c26fa42845bd388fdf95e79-20140723092146-119-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/e6477000fced2c961c26fa42845bd388fdf95e79/vmlinuz-3.1.0-rc4-01469-ge647700 drbd.minor_count=8
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Memory: 250800k/327672k available (12700k kernel code, 452k absent, 76420k reserved, 18901k data, 628k init)
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 2693.508 MHz processor.
[ 0.006666] Calibrating delay loop (skipped) preset value.. 5389.47 BogoMIPS (lpj=8978360)
[ 0.006666] pid_max: default: 32768 minimum: 301
[ 0.006731] Mount-cache hash table entries: 256
[ 0.008740] CPU: Intel Common KVM processor stepping 01
[ 0.013548] ACPI: Core revision 20110623
[ 0.028788] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.037355] Getting VERSION: 1050014
[ 0.037904] Getting VERSION: 1050014
[ 0.038450] Getting ID: 0
[ 0.038862] Getting ID: ff000000
[ 0.039353] Getting LVT0: 8700
[ 0.039802] Getting LVT1: 8400
[ 0.040038] enabled ExtINT on CPU#0
[ 0.041453] ENABLING IO-APIC IRQs
[ 0.041950] init IO_APIC IRQs
[ 0.042384] apic 0 pin 0 not connected
[ 0.043347] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.044517] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.045684] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.046732] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.047935] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.049172] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.050043] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.051237] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.052422] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.053376] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.054561] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.055748] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.056728] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.057917] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.060042] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.061221] apic 0 pin 16 not connected
[ 0.061799] apic 0 pin 17 not connected
[ 0.062370] apic 0 pin 18 not connected
[ 0.063340] apic 0 pin 19 not connected
[ 0.063952] apic 0 pin 20 not connected
[ 0.064584] apic 0 pin 21 not connected
[ 0.065239] apic 0 pin 22 not connected
[ 0.065881] apic 0 pin 23 not connected
[ 0.066848] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070005] Using local APIC timer interrupts.
[ 0.070009] calibrating APIC timer ...
[ 0.073329] ... lapic delta = 10834669
[ 0.073329] ... PM-Timer delta = 620518
[ 0.073329] APIC calibration not consistent with PM-Timer: 173ms instead of 100ms
[ 0.073329] APIC delta adjusted to PM-Timer: 6250121 (10834669)
[ 0.073329] TSC delta adjusted to PM-Timer: 269351132 (466923756)
[ 0.073329] ..... delta 6250121
[ 0.073329] ..... mult: 268458156
[ 0.073329] ..... calibration result: 3333397
[ 0.073329] ..... CPU clock speed is 2693.2602 MHz.
[ 0.073329] ..... host bus clock speed is 1000.0397 MHz.
[ 0.074554] xor: automatically using best checksumming function: generic_sse
[ 0.090025] generic_sse: 7846.800 MB/sec
[ 0.093356] xor: using function: generic_sse (7846.800 MB/sec)
[ 0.094664] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.097980] print_constraints: dummy:
[ 0.099326] NET: Registered protocol family 16
[ 0.100859] ACPI: bus type pci registered
[ 0.103442] PCI: Using configuration type 1 for base access
[ 0.129752] bio: create slab <bio-0> at 0
[ 0.186699] raid6: int64x1 1644 MB/s
[ 0.243371] raid6: int64x2 1535 MB/s
[ 0.300028] raid6: int64x4 1346 MB/s
[ 0.356669] raid6: int64x8 857 MB/s
[ 0.416657] raid6: sse2x1 885 MB/s
[ 0.473338] raid6: sse2x2 1410 MB/s
[ 0.530034] raid6: sse2x4 1359 MB/s
[ 0.533308] raid6: using algorithm sse2x2 (1410 MB/s)
[ 0.534935] ACPI: Added _OSI(Module Device)
[ 0.536650] ACPI: Added _OSI(Processor Device)
[ 0.539980] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.540967] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.553724] ACPI: EC: Look up EC in DSDT
[ 0.597247] ACPI: Interpreter enabled
[ 0.599982] ACPI: (supports S0 S3 S5)
[ 0.603533] ACPI: Using IOAPIC for interrupt routing
[ 0.653574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.660102] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.664245] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.666648] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xadff]
[ 0.669977] pci_root PNP0A03:00: host bridge window [io 0xae0f-0xaeff]
[ 0.671977] pci_root PNP0A03:00: host bridge window [io 0xaf20-0xafdf]
[ 0.673312] pci_root PNP0A03:00: host bridge window [io 0xafe4-0xffff]
[ 0.674780] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.676644] pci_root PNP0A03:00: host bridge window [mem 0x14000000-0xfebfffff]
[ 0.680141] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.683816] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.687359] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.692421] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f]
[ 0.694790] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.700110] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.701614] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.703548] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.710644] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 0.714750] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
[ 0.730629] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.733488] pci 0000:00:03.0: [8086:100e] type 0 class 0x000200
[ 0.737743] pci 0000:00:03.0: reg 10: [mem 0xfebc0000-0xfebdffff]
[ 0.741050] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f]
[ 0.748018] pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.750155] pci 0000:00:04.0: [8086:25ab] type 0 class 0x000880
[ 0.753901] pci 0000:00:04.0: reg 10: [mem 0xfebf1000-0xfebf100f]
[ 0.763661] pci_bus 0000:00: on NUMA node 0
[ 0.766646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.774579] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.825199] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.827674] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.829596] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.830948] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.833683] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.838872] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.839978] vgaarb: loaded
[ 0.840559] vgaarb: bridge control possible 0000:00:02.0
[ 0.844252] i2c-core: driver [aat2870] using legacy suspend method
[ 0.846622] i2c-core: driver [aat2870] using legacy resume method
[ 0.848587] SCSI subsystem initialized
[ 0.850211] libata version 3.00 loaded.
[ 0.851628] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.852927] PCI: Using ACPI for IRQ routing
[ 0.853298] PCI: pci_cache_line_size set to 64 bytes
[ 0.854615] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.856642] reserve RAM buffer: 0000000013ffe000 - 0000000013ffffff
[ 0.859010] Bluetooth: Core ver 2.16
[ 0.860218] NET: Registered protocol family 31
[ 0.863286] Bluetooth: HCI device and connection manager initialized
[ 0.864620] Bluetooth: HCI socket layer initialized
[ 0.865649] NET: Registered protocol family 8
[ 0.866624] NET: Registered protocol family 20
[ 0.867830] Switching to clocksource kvm-clock
[ 0.869488] Warning: could not register all branches stats
[ 0.869488] Warning: could not register annotated branches stats
[ 0.975084] pnp: PnP ACPI init
[ 0.975665] ACPI: bus type pnp registered
[ 0.976961] pnp 00:00: [bus 00-ff]
[ 0.977490] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.978083] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.979082] pnp 00:00: [io 0x0d00-0xadff window]
[ 0.980225] pnp 00:00: [io 0xae0f-0xaeff window]
[ 0.981236] pnp 00:00: [io 0xaf20-0xafdf window]
[ 0.982238] pnp 00:00: [io 0xafe4-0xffff window]
[ 0.983242] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.994334] pnp 00:00: [mem 0x14000000-0xfebfffff window]
[ 0.995752] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.997191] pnp 00:01: [io 0x0070-0x0071]
[ 0.997730] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.998752] pnp 00:01: [irq 8]
[ 0.999158] pnp 00:01: [io 0x0072-0x0077]
[ 0.999959] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.001596] pnp 00:02: [io 0x0060]
[ 1.002340] pnp 00:02: [io 0x0064]
[ 1.003076] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 1.005692] pnp 00:02: [irq 1]
[ 1.006641] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.017998] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 1.019701] pnp 00:03: [irq 12]
[ 1.020615] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.021664] pnp 00:04: [io 0x03f2-0x03f5]
[ 1.022207] pnp 00:04: [io 0x03f7]
[ 1.022666] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 1.024029] pnp 00:04: [irq 6]
[ 1.024695] pnp 00:04: [dma 2]
[ 1.025712] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.033745] pnp 00:05: [io 0x0378-0x037f]
[ 1.034641] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 1.036339] pnp 00:05: [irq 7]
[ 1.037402] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 1.039232] pnp 00:06: [io 0x03f8-0x03ff]
[ 1.050392] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 1.052076] pnp 00:06: [irq 4]
[ 1.053046] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.055657] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 1.057201] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.059432] pnp 00:08: [io 0xaf00-0xaf1f]
[ 1.063871] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 1.065282] pnp: PnP ACPI: found 9 devices
[ 1.066125] ACPI: ACPI bus type pnp unregistered
[ 1.084732] PCI: max bus depth: 0 pci_try_num: 1
[ 1.085734] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.088124] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff]
[ 1.089281] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff]
[ 1.100711] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf]
[ 1.101891] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff]
[ 1.103055] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
[ 1.104127] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff]
[ 1.104996] NET: Registered protocol family 1
[ 1.105614] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.106433] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.107735] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.109329] pci 0000:00:02.0: Boot video device
[ 1.113554] PCI: CLS 0 bytes, default 64
[ 1.114898] Unpacking initramfs...
[ 4.485330] debug: unmapping init memory ffff88001293d000..ffff880013ff0000
[ 4.520965] kvm: no hardware support
[ 4.522958] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1
[ 4.524595] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 4.527323] Intel AES-NI instructions are not detected.
[ 4.528404] Intel PCLMULQDQ-NI instructions are not detected.
[ 4.542026] audit: initializing netlink socket (disabled)
[ 4.543592] type=2000 audit(1406049668.543:1): initialized
[ 4.549256] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.551158] VFS: Disk quotas dquot_6.5.2
[ 4.552036] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.553845] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.558449] NTFS driver 2.1.30 [Flags: R/W DEBUG].
[ 4.724911] JFS: nTxBlock = 1959, nTxLock = 15675
[ 4.728739] msgmni has been set to 489
[ 4.729833] alg: No test for cipher_null (cipher_null-generic)
[ 4.731327] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 4.733878] alg: No test for digest_null (digest_null-generic)
[ 4.737701] alg: No test for compress_null (compress_null-generic)
[ 4.756092] alg: No test for fcrypt (fcrypt-generic)
[ 4.763989] alg: No test for stdrng (krng)
[ 4.804879] NET: Registered protocol family 38
[ 4.818877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.820675] io scheduler noop registered (default)
[ 4.821761] io scheduler deadline registered
[ 4.822701] list_sort_test: start testing list_sort()
[ 4.828270] i2c-core: driver [adp8860_bl] using legacy suspend method
[ 4.829773] i2c-core: driver [adp8860_bl] using legacy resume method
[ 4.839721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 4.841415] ACPI: Power Button [PWRF]
[ 4.842511] ACPI: acpi_idle registered with cpuidle
[ 4.849027] XENFS: not registering filesystem on non-xen platform
[ 4.864291] HDLC line discipline maxframe=4096
[ 4.865245] N_HDLC line discipline registered.
[ 4.866168] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 4.867413] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.925234] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.982053] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.986598] Non-volatile memory driver v1.3
[ 4.994014] smapi::smapi_init, ERROR invalid usSmapiID
[ 4.995327] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 5.010367] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 5.011874] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 5.013569] ipmi message handler version 39.2
[ 5.014501] ipmi device interface
[ 5.015481] IPMI System Interface driver.
[ 5.016816] ipmi_si: Adding default-specified kcs state machine
[ 5.018090] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 5.020303] ipmi_si: Interface detection failed
[ 5.021282] ipmi_si: Adding default-specified smic state machine
[ 5.022535] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[ 5.024702] ipmi_si: Interface detection failed
[ 5.026827] ipmi_si: Adding default-specified bt state machine
[ 5.030278] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[ 5.032322] ipmi_si: Interface detection failed
[ 5.034816] ipmi_si: Unable to find any System Interface(s)
[ 5.037950] IPMI Watchdog: driver initialized
[ 5.039692] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 5.050591] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 5.052552] Hangcheck: Using getrawmonotonic().
[ 5.054658] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[ 5.057106] Uniform Multi-Platform E-IDE driver
[ 5.059076] ide-gd driver 1.18
[ 5.060414] ide-cd driver 5.00
[ 5.065411] Loading iSCSI transport class v2.0-870.
[ 5.071865] rdac: device handler registered
[ 5.073008] hp_sw: device handler registered
[ 5.075084] emc: device handler registered
[ 5.077668] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 5.080891] osst :I: Tape driver with OnStream support version 0.99.4
[ 5.080894] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 5.099639] SCSI Media Changer driver v0.25
[ 5.101388] osd: LOADED open-osd 0.2.0
[ 5.102578] Error: Driver 'pata_platform' is already registered, aborting...
[ 5.105471] SSFDC read-only Flash Translation layer
[ 5.106527] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 5.108395] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[ 5.110566] physmap-flash.0: failed to claim resource 0
[ 5.111751] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
[ 5.113197] slram: not enough parameters.
[ 5.131212] Spectra MTD driver
[ 5.132273] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 5.134544] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 5.136594] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 5.145773] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 5.147913] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 5.149888] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 5.152185] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit)
[ 5.167772] flash size: 128 MiB
[ 5.168439] page size: 512 bytes
[ 5.169104] OOB area size: 16 bytes
[ 5.169835] sector size: 16 KiB
[ 5.170756] pages number: 262144
[ 5.171620] pages per sector: 32
[ 5.172473] bus width: 8
[ 5.173149] bits in sector size: 14
[ 5.174022] bits in page size: 9
[ 5.174741] bits in OOB size: 4
[ 5.175415] flash size with OOB: 135168 KiB
[ 5.176298] page address bytes: 4
[ 5.177236] sector address bytes: 3
[ 5.178161] options: 0x62
[ 5.181415] Scanning device for bad blocks
[ 5.458686] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[ 5.473903] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[ 5.478715] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx>
[ 5.481218] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx>
[ 5.484718] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.494279] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.495560] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.626544] Refined TSC clocksource calibration: 2693.507 MHz.
[ 5.631740] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 5.650324] i2c /dev entries driver
[ 5.651690] i2c-parport-light: adapter type unspecified
[ 5.652796] Driver for 1-wire Dallas network protocol.
[ 5.654970] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 5.656668] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 5.659872] i2c-core: driver [max17040] using legacy suspend method
[ 5.661765] i2c-core: driver [max17040] using legacy resume method
[ 5.664372] md: raid1 personality registered for level 1
[ 5.665453] md: raid10 personality registered for level 10
[ 5.666574] md: raid6 personality registered for level 6
[ 5.668101] md: raid5 personality registered for level 5
[ 5.669527] md: raid4 personality registered for level 4
[ 5.671130] md: faulty personality registered for level -5
[ 5.674162] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx
[ 5.676516] device-mapper: multipath: version 1.3.0 loaded
[ 5.677835] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.679389] device-mapper: multipath service-time: version 0.2.0 loaded
[ 5.681481] Bluetooth: Virtual HCI driver ver 1.3
[ 5.683117] cpuidle: using governor ladder
[ 5.690262] i2c-core: driver [adt7316] using legacy suspend method
[ 5.691513] i2c-core: driver [adt7316] using legacy resume method
[ 5.694951] i2c-core: driver [tsl2563] using legacy suspend method
[ 5.697795] i2c-core: driver [tsl2563] using legacy resume method
[ 5.699755] i2c-core: driver [tsl2583] using legacy suspend method
[ 5.701612] i2c-core: driver [tsl2583] using legacy resume method
[ 5.703616] i2c-core: driver [hmc5843] using legacy suspend method
[ 5.704865] i2c-core: driver [hmc5843] using legacy resume method
[ 5.707160] i2c-core: driver [cptm1217] using legacy suspend method
[ 5.708768] i2c-core: driver [cptm1217] using legacy resume method
[ 5.712052] ALSA device list:
[ 5.712877] No soundcards found.
[ 5.713920] NET: Registered protocol family 26
[ 5.716084] NET: Registered protocol family 17
[ 5.717292] NET: Registered protocol family 15
[ 5.718222] NET: Registered protocol family 5
[ 5.719162] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 5.721304] DECnet: Routing cache hash table of 128 buckets, 10Kbytes
[ 5.723085] NET: Registered protocol family 12
[ 5.724812] Installing 9P2000 support
[ 5.728207] NET: Registered protocol family 37
[ 5.741741] Registering the dns_resolver key type
[ 5.743765] batman_adv: B.A.T.M.A.N. advanced 2011.3.0 (compatibility version 14) loaded
[ 5.746030]
[ 5.746033] printing PIC contents
[ 5.747551] ... PIC IMR: ffff
[ 5.748395] ... PIC IRR: 1013
[ 5.749279] ... PIC ISR: 0000
[ 5.750257] ... PIC ELCR: 0c00
[ 5.751049] printing local APIC contents on CPU#0/0:
[ 5.753498] ... APIC ID: 00000000 (0)
[ 5.753498] ... APIC VERSION: 01050014
[ 5.753498] ... APIC TASKPRI: 00000000 (00)
[ 5.753498] ... APIC PROCPRI: 00000000
[ 5.753498] ... APIC LDR: 01000000
[ 5.753498] ... APIC DFR: ffffffff
[ 5.753498] ... APIC SPIV: 000001ff
[ 5.753498] ... APIC ISR field:
[ 5.753498] 0000000000000000000000000000000000000000000000000000000000000000
[ 5.753498] ... APIC TMR field:
[ 5.753498] 0000000002000000000000000000000000000000000000000000000000000000
[ 5.753498] ... APIC IRR field:
[ 5.753498] 0000000000010000000000000000000000000000000000000000000000008000
[ 5.753498] ... APIC ESR: 00000000
[ 5.753498] ... APIC ICR: 000c4610
[ 5.753498] ... APIC ICR2: 00000000
[ 5.753498] ... APIC LVTT: 000000ef
[ 5.753498] ... APIC LVTPC: 00010000
[ 5.753498] ... APIC LVT0: 00010700
[ 5.753498] ... APIC LVT1: 00000400
[ 5.753498] ... APIC LVTERR: 000000fe
[ 5.753498] ... APIC TMICT: 00030434
[ 5.753498] ... APIC TMCCT: 00000000
[ 5.753498] ... APIC TDCR: 00000003
[ 5.753498]
[ 5.806374] number of MP IRQ sources: 15.
[ 5.807607] number of IO-APIC #0 registers: 24.
[ 5.808856] testing the IO APIC.......................
[ 5.810384]
[ 5.810820] IO APIC #0......
[ 5.811628] .... register #00: 00000000
[ 5.814065] ....... : physical APIC id: 00
[ 5.817134] ....... : Delivery Type: 0
[ 5.818040] ....... : LTS : 0
[ 5.820158] .... register #01: 00170011
[ 5.821176] ....... : max redirection entries: 17
[ 5.824394] ....... : PRQ implemented: 0
[ 5.825391] ....... : IO APIC version: 11
[ 5.827479] .... register #02: 00000000
[ 5.830715] ....... : arbitration: 00
[ 5.831614] .... IRQ redirection table:
[ 5.832597] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[ 5.839573] 00 00 1 0 0 0 0 0 0 00
[ 5.841132] 01 01 0 0 0 0 0 1 1 31
[ 5.842585] 02 01 0 0 0 0 0 1 1 30
[ 5.844002] 03 01 0 0 0 0 0 1 1 33
[ 5.847349] 04 01 1 0 0 0 0 1 1 34
[ 5.848766] 05 01 1 1 0 0 0 1 1 35
[ 5.851206] 06 01 0 0 0 0 0 1 1 36
[ 5.854898] 07 01 0 0 0 0 0 1 1 37
[ 5.857089] 08 01 0 0 0 0 0 1 1 38
[ 5.860976] 09 01 0 1 0 0 0 1 1 39
[ 5.862262] 0a 01 1 1 0 0 0 1 1 3A
[ 5.876473] 0b 01 1 1 0 0 0 1 1 3B
[ 5.877810] 0c 01 0 0 0 0 0 1 1 3C
[ 5.879117] 0d 01 0 0 0 0 0 1 1 3D
[ 5.880561] 0e 01 0 0 0 0 0 1 1 3E
[ 5.881759] 0f 01 0 0 0 0 0 1 1 3F
[ 5.883169] 10 00 1 0 0 0 0 0 0 00
[ 5.884689] 11 00 1 0 0 0 0 0 0 00
[ 5.885951] 12 00 1 0 0 0 0 0 0 00
[ 5.887267] 13 00 1 0 0 0 0 0 0 00
[ 5.888461] 14 00 1 0 0 0 0 0 0 00
[ 5.889644] 15 00 1 0 0 0 0 0 0 00
[ 5.891113] 16 00 1 0 0 0 0 0 0 00
[ 5.894526] 17 00 1 0 0 0 0 0 0 00
[ 5.895792] IRQ to pin mappings:
[ 5.897714] IRQ0 -> 0:2
[ 5.900755] IRQ1 -> 0:1
[ 5.901375] IRQ3 -> 0:3
[ 5.901983] IRQ4 -> 0:4
[ 5.902597] IRQ5 -> 0:5
[ 5.906802] IRQ6 -> 0:6
[ 5.907438] IRQ7 -> 0:7
[ 5.908203] IRQ8 -> 0:8
[ 5.909051] IRQ9 -> 0:9
[ 5.910150] IRQ10 -> 0:10
[ 5.914281] IRQ11 -> 0:11
[ 5.915090] IRQ12 -> 0:12
[ 5.915878] IRQ13 -> 0:13
[ 5.916601] IRQ14 -> 0:14
[ 5.920370] IRQ15 -> 0:15
[ 5.921131] .................................... done.
[ 5.939357] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 5.943219] registered taskstats version 1
[ 5.944719] raid6test: testing the 4-disk case...
[ 5.946059] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 5.947993] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK
[ 5.949773] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK
[ 5.964928] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK
[ 5.967127] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK
[ 5.968981] raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK
[ 5.971150] raid6test: testing the 5-disk case...
[ 5.972573] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 5.974577] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 5.976460] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK
[ 5.978585] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK
[ 5.993927] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 5.995799] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK
[ 5.997932] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK
[ 6.000171] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK
[ 6.002077] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK
[ 6.004165] raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK
[ 6.006096] raid6test: testing the 11-disk case...
[ 6.007631] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 6.010530] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 6.014736] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 6.017663] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 6.021929] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 6.037738] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 6.039505] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 6.041410] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 6.043227] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(P) OK
[ 6.045031] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(Q) OK
[ 6.047046] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 6.048871] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 6.050753] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 6.052464] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 6.059564] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 6.061428] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 6.063546] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 6.067823] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(P) OK
[ 6.069510] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(Q) OK
[ 6.084709] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 6.086625] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 6.088779] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 6.090865] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 6.092804] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 6.094883] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 6.096641] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(P) OK
[ 6.111512] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(Q) OK
[ 6.113525] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 6.115192] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 6.117299] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 6.119252] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 6.121148] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 6.122833] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(P) OK
[ 6.124845] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(Q) OK
[ 6.127202] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 6.132159] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 6.147133] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 6.149149] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 6.151313] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(P) OK
[ 6.153506] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(Q) OK
[ 6.155454] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 6.157540] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 6.159477] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 6.168803] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(P) OK
[ 6.170886] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(Q) OK
[ 6.172856] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 6.174757] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 6.176497] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(P) OK
[ 6.191649] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(Q) OK
[ 6.193747] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 6.195669] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(P) OK
[ 6.197759] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(Q) OK
[ 6.199699] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(P) OK
[ 6.201553] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(Q) OK
[ 6.203611] raid6test: test_disks(9, 10): faila= 9(P) failb= 10(Q) OK
[ 6.205527] raid6test: testing the 12-disk case...
[ 6.220536] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 6.222391] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 6.224500] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 6.226438] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 6.228370] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 6.230195] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 6.232118] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 6.234049] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 6.237206] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
[ 6.241074] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(P) OK
[ 6.244154] raid6test: test_disks(0, 11): faila= 0(D) failb= 11(Q) OK
[ 6.248240] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 6.251220] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 6.255359] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 6.264735] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 6.266806] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 6.268640] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 6.270688] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 6.274285] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
[ 6.292378] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(P) OK
[ 6.294422] raid6test: test_disks(1, 11): faila= 1(D) failb= 11(Q) OK
[ 6.296279] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 6.298347] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 6.300362] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 6.302162] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 6.304252] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 6.308077] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 6.311294] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
[ 6.315117] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(P) OK
[ 6.330565] raid6test: test_disks(2, 11): faila= 2(D) failb= 11(Q) OK
[ 6.332543] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 6.334571] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 6.336456] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 6.338514] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 6.340537] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 6.342449] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
[ 6.344492] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(P) OK
[ 6.348207] raid6test: test_disks(3, 11): faila= 3(D) failb= 11(Q) OK
[ 6.351743] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 6.355186] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 6.371531] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 6.373555] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 6.375392] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
[ 6.377407] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(P) OK
[ 6.379320] raid6test: test_disks(4, 11): faila= 4(D) failb= 11(Q) OK
[ 6.381333] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 6.383221] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 6.385235] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 6.388698] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
[ 6.403888] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(P) OK
[ 6.405784] raid6test: test_disks(5, 11): faila= 5(D) failb= 11(Q) OK
[ 6.407771] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 6.409567] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 6.411518] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
[ 6.413328] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(P) OK
[ 6.415258] raid6test: test_disks(6, 11): faila= 6(D) failb= 11(Q) OK
[ 6.417187] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 6.419011] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
[ 6.434098] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(P) OK
[ 6.435936] raid6test: test_disks(7, 11): faila= 7(D) failb= 11(Q) OK
[ 6.438016] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
[ 6.439872] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(P) OK
[ 6.441787] raid6test: test_disks(8, 11): faila= 8(D) failb= 11(Q) OK
[ 6.443752] raid6test: test_disks(9, 10): faila= 9(D) failb= 10(P) OK
[ 6.445593] raid6test: test_disks(9, 11): faila= 9(D) failb= 11(Q) OK
[ 6.447556] raid6test: test_disks(10, 11): faila= 10(P) failb= 11(Q) OK
[ 6.451652] raid6test: testing the 16-disk case...
[ 6.453849] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 6.458410] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 6.473615] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 6.475206] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 6.476915] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 6.478723] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 6.480543] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 6.482118] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 6.483883] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
[ 6.485690] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK
[ 6.487595] raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK
[ 6.490944] raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK
[ 6.494300] raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK
[ 6.497623] raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK
[ 6.501050] raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK
[ 6.504589] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 6.508108] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 6.511448] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 6.515131] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 6.531470] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 6.533260] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 6.534962] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 6.536611] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
[ 6.538541] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK
[ 6.540397] raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK
[ 6.541988] raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK
[ 6.543756] raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK
[ 6.545579] raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK
[ 6.553857] raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK
[ 6.555699] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 6.557705] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 6.559545] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 6.574318] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 6.576152] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 6.578128] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 6.579932] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
[ 6.581832] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK
[ 6.583703] raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK
[ 6.585550] raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK
[ 6.587544] raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK
[ 6.589414] raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK
[ 6.591429] raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK
[ 6.593300] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 6.595366] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 6.600180] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 6.602021] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 6.604081] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 6.605997] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
[ 6.607959] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK
[ 6.609818] raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK
[ 6.611974] raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK
[ 6.614008] raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK
[ 6.615961] raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK
[ 6.618121] raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK
[ 6.619997] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 6.621963] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 6.623977] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 6.625876] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 6.627923] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
[ 6.629801] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK
[ 6.631800] raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK
[ 6.633823] raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK
[ 6.635738] raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK
[ 6.637705] raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK
[ 6.639622] raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK
[ 6.641672] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 6.643652] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 6.645530] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 6.647487] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
[ 6.649372] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK
[ 6.651400] raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK
[ 6.653274] raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK
[ 6.655262] raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK
[ 6.657271] raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK
[ 6.659105] raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK
[ 6.661095] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 6.662960] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 6.664940] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
[ 6.666935] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK
[ 6.668886] raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK
[ 6.671006] raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK
[ 6.673046] raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK
[ 6.675092] raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK
[ 6.677308] raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK
[ 6.679192] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 6.681265] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
[ 6.684370] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK
[ 6.687799] raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK
[ 6.692339] raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK
[ 6.695809] raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK
[ 6.699700] raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK
[ 6.703100] raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK
[ 6.706989] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
[ 6.710304] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK
[ 6.715448] raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK
[ 6.717662] raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK
[ 6.722452] raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK
[ 6.725319] raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK
[ 6.728919] raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK
[ 6.732594] raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK
[ 6.736322] raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK
[ 6.743629] raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK
[ 6.747102] raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK
[ 6.750448] raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK
[ 6.755447] raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK
[ 6.758845] raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK
[ 6.762569] raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK
[ 6.765910] raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK
[ 6.769711] raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK
[ 6.772990] raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK
[ 6.776961] raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK
[ 6.782002] raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK
[ 6.785325] raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK
[ 6.789112] raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK
[ 6.792364] raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK
[ 6.796215] raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK
[ 6.799456] raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK
[ 6.803313] raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK
[ 6.806546] raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK
[ 6.810393] raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK
[ 6.815272] raid6test:
[ 6.815919] raid6test: complete (257 tests, 0 failures)
[ 6.876253] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.881990] EDD information not available.
[ 6.884687] debug: unmapping init memory ffffffff82ee2000..ffffffff82f7f000
[ 6.886312] Write protecting the kernel read-only data: 22528k
[ 6.893087] debug: unmapping init memory ffff880001c77000..ffff880001e00000
[ 6.898856] debug: unmapping init memory ffff880002460000..ffff880002600000
/bin/sh: /proc/self/fd/9: No such file or directory
/bin/sh: /proc/self/fd/9: No such file or directory
/bin/sh: /proc/self/fd/9: No such file or directory

BUG: kernel boot hang
Elapsed time: 35
qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-s0-07220709/e6477000fced2c961c26fa42845bd388fdf95e79/vmlinuz-3.1.0-rc4-01469-ge647700 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-07220709/linux-devel:devel-hourly-2014072206:e6477000fced2c961c26fa42845bd388fdf95e79:bisect-linux1/.vmlinuz-e6477000fced2c961c26fa42845bd388fdf95e79-20140723092146-119-ivb41 branch=linux-devel/devel-hourly-2014072206 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-07220709/e6477000fced2c961c26fa42845bd388fdf95e79/vmlinuz-3.1.0-rc4-01469-ge647700 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-ivb41-100 -serial file:/dev/shm/kboot/serial-quantal-ivb41-100 -daemonize -display none -monitor null

Attachment: x86_64-randconfig-s0-07220709-eee4ca37c17a74bc97c899b0e68a36ff0f17392a-BUG:-unable-to-handle-kernel-NULL-pointer-dereference-75630.log
Description: Binary data

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.1.0-rc4 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_DEBUG is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_AMD is not set
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_PM_SLEEP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=y

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_NET_KEY=y
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_ATM=y
# CONFIG_ATM_LANE is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
# CONFIG_IPDDP_DECAP is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_HAVE_BPF_JIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_REGULATOR=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_AR7_PARTS=y

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_MTD_OOPS=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_SBC_GXX=y
# CONFIG_MTD_AMD76XROM is not set
CONFIG_MTD_ICHXROM=y
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
CONFIG_MTD_LATCH_ADDR=y

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SST25L is not set
CONFIG_MTD_SLRAM=y
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set

#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_OSD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_XEN_BLKDEV_BACKEND is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=y
# CONFIG_IDE_GD_ATA is not set
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
CONFIG_BLK_DEV_PLATFORM=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set

#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_QL is not set
CONFIG_DM_MULTIPATH_ST=y
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_TC3589X is not set
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_AS5011=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2005=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_ISI is not set
CONFIG_N_HDLC=y
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
CONFIG_DEVKMEM=y
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
# CONFIG_SERIAL_MAX3107 is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_TTY_PRINTK=y
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_XEN is not set
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
CONFIG_MWAVE=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_TLE62X0=y

#
# PPS support
#

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SX150X=y
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
# CONFIG_GPIO_ADP5520 is not set
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_TPS65910=y
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_PCF50633=y
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_TWL4030=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MAX8998=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_DEBUG is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
# CONFIG_MFD_TWL4030_AUDIO is not set
# CONFIG_TWL6030_PWM is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
# CONFIG_PCF50633_GPIO is not set
CONFIG_MFD_MC13783=y
CONFIG_MFD_MC13XXX=y
# CONFIG_ABX500_CORE is not set
CONFIG_EZX_PCAP=y
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8400=y
# CONFIG_REGULATOR_PCF50633 is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_PCAP is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS65910=y
# CONFIG_REGULATOR_AAT2870 is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_S6E63M0=y
CONFIG_LCD_LD9040=y
CONFIG_LCD_AMS369FG06=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
# CONFIG_BACKLIGHT_ADP5520 is not set
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
# CONFIG_BACKLIGHT_AAT2870 is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=y
# CONFIG_SND_SEQ_HRTIMER_DEFAULT is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_SOC=y
# CONFIG_SND_SOC_CACHE_LZO is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
# CONFIG_HID_PID is not set

#
# Special HID drivers
#
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_ALIX2 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y

#
# Virtio drivers
#
CONFIG_VIRTIO_BALLOON=y

#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=y
# CONFIG_XEN_COMPAT_XENFS is not set
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_XEN_PLATFORM_PCI=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=y
CONFIG_XEN_PCIDEV_BACKEND=y
CONFIG_STAGING=y
CONFIG_ECHO=y
# CONFIG_RTS_PSTOR is not set
# CONFIG_POHMELFS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_SW_RING=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
CONFIG_ADIS16203=y
# CONFIG_ADIS16204 is not set
# CONFIG_ADIS16209 is not set
CONFIG_ADIS16220=y
CONFIG_ADIS16240=y
CONFIG_KXSD9=y
CONFIG_LIS3L02DQ=y
CONFIG_LIS3L02DQ_BUF_KFIFO=y
# CONFIG_LIS3L02DQ_BUF_RING_SW is not set
CONFIG_SCA3000=y

#
# Analog to digital convertors
#
CONFIG_AD7150=y
CONFIG_AD7152=y
CONFIG_AD7291=y
# CONFIG_AD7298 is not set
# CONFIG_AD7606 is not set
CONFIG_AD799X=y
CONFIG_AD799X_RING_BUFFER=y
# CONFIG_AD7476 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7780 is not set
CONFIG_AD7793=y
CONFIG_AD7746=y
# CONFIG_AD7816 is not set
CONFIG_AD7192=y
# CONFIG_ADT7310 is not set
# CONFIG_ADT7410 is not set
CONFIG_AD7280=y
# CONFIG_MAX1363 is not set

#
# Analog digital bi-direction convertors
#
CONFIG_ADT7316=y
# CONFIG_ADT7316_SPI is not set
CONFIG_ADT7316_I2C=y

#
# Digital to analog convertors
#
CONFIG_AD5624R_SPI=y
# CONFIG_AD5446 is not set
# CONFIG_AD5504 is not set
CONFIG_AD5791=y
CONFIG_AD5686=y

#
# Direct Digital Synthesis
#
CONFIG_AD5930=y
CONFIG_AD9832=y
CONFIG_AD9834=y
CONFIG_AD9850=y
CONFIG_AD9852=y
CONFIG_AD9910=y
CONFIG_AD9951=y

#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=y
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
# CONFIG_ADIS16260 is not set
CONFIG_ADXRS450=y

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y

#
# Inertial measurement units
#
CONFIG_ADIS16400=y

#
# Light sensors
#
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y

#
# Magnetometer sensors
#
# CONFIG_SENSORS_AK8975 is not set
CONFIG_SENSORS_HMC5843=y

#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
CONFIG_ADE7754=y
CONFIG_ADE7758=y
# CONFIG_ADE7759 is not set
# CONFIG_ADE7854 is not set

#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
CONFIG_AD2S1210=y

#
# Triggers - standalone
#
# CONFIG_IIO_GPIO_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# CONFIG_XVMALLOC is not set
# CONFIG_ZRAM is not set
# CONFIG_ZCACHE is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_ACPI_QUICKSTART is not set
CONFIG_FT1000=y

#
# Speakup console speech
#
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=y
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_DRM_PSB is not set
CONFIG_ALTERA_STAPL=y
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=y
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_HYPERV is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HFSPLUS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
# CONFIG_JFFS2_ZLIB is not set
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
# CONFIG_JFFS2_CMODE_PRIORITY is not set
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZO is not set
# CONFIG_SQUASHFS_XZ is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_DEBUG=y
CONFIG_ORE=y
CONFIG_EXOFS_FS=y
# CONFIG_EXOFS_DEBUG is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_LKDTM is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not set
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_BCH=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
_______________________________________________
LKP mailing list
LKP@xxxxxxxxxxxxxxx

Next message: Eric W. Biederman: "Re: [PATCH 11/11] seccomp: Add tgid and tid into seccomp_data"
Previous message: Fengguang Wu: "[x86] BUG: unable to handle kernel paging request at ffff880012770000"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]