[PATCH v8 01/11] drm: sti: add bindings for DRM driver
From: Benjamin Gaignard
Date: Wed Jul 30 2014 - 13:42:37 EST
Add DRM/KMS driver bindings documentation.
Describe the required properties for each of the hardware IPs drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
Reviewed-by: Rob Clark <robdclark@xxxxxxxxx>
---
.../devicetree/bindings/gpu/st,stih4xx.txt | 189 +++++++++++++++++++++
drivers/gpu/drm/sti/NOTES | 58 +++++++
2 files changed, 247 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpu/st,stih4xx.txt
create mode 100644 drivers/gpu/drm/sti/NOTES
diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
new file mode 100644
index 0000000..2d150c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -0,0 +1,189 @@
+STMicroelectronics stih4xx platforms
+
+- sti-vtg: video timing generator
+ Required properties:
+ - compatible: "st,vtg"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ Optional properties:
+ - interrupts : VTG interrupt number to the CPU.
+ - st,slave: phandle on a slave vtg
+
+- sti-vtac: video timing advanced inter dye communication Rx and TX
+ Required properties:
+ - compatible: "st,vtac-main" or "st,vtac-aux"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+
+- sti-display-subsystem: Master device for DRM sub-components
+ This device must be the parent of all the sub-components and is responsible
+ of bind them.
+ Required properties:
+ - compatible: "st,sti-display-subsystem"
+ - ranges: to allow probing of subdevices
+
+- sti-compositor: frame compositor engine
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-compositor"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ - st,vtg: phandle(s) on vtg device (main and aux) nodes.
+
+- sti-tvout: video out hardware block
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-tvout"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ - ranges: to allow probing of subdevices
+
+- sti-hdmi: hdmi output block
+ must be a child of sti-tvout
+ Required properties:
+ - compatible: "st,stih<chip>-hdmi";
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - interrupts : HDMI interrupt number to the CPU.
+ - interrupt-names: name of the interrupts listed in interrupts property in
+ the same order
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+
+sti-hda:
+ Required properties:
+ must be a child of sti-tvout
+ - compatible: "st,stih<chip>-hda"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+
+Example:
+
+/ {
+ ...
+
+ vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+ compatible = "st,vtg";
+ reg = <0xfe85A800 0x300>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
+ };
+
+ vtg_main: sti-vtg-main-master@fd348000 {
+ compatible = "st,vtg";
+ reg = <0xfd348000 0x400>;
+ st,slave = <&vtg_main_slave>;
+ };
+
+ vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
+ compatible = "st,vtg";
+ reg = <0xfe858200 0x300>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux-master@fd348400 {
+ compatible = "st,vtg";
+ reg = <0xfd348400 0x400>;
+ st,slave = <&vtg_aux_slave>;
+ };
+
+
+ sti-vtac-rx-main@fee82800 {
+ compatible = "st,vtac-main";
+ reg = <0xfee82800 0x200>;
+ clock-names = "vtac";
+ clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>;
+ };
+
+ sti-vtac-rx-aux@fee82a00 {
+ compatible = "st,vtac-aux";
+ reg = <0xfee82a00 0x200>;
+ clock-names = "vtac";
+ clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>;
+ };
+
+ sti-vtac-tx-main@fd349000 {
+ compatible = "st,vtac-main";
+ reg = <0xfd349000 0x200>, <0xfd320000 0x10000>;
+ clock-names = "vtac";
+ clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+ };
+
+ sti-vtac-tx-aux@fd349200 {
+ compatible = "st,vtac-aux";
+ reg = <0xfd349200 0x200>, <0xfd320000 0x10000>;
+ clock-names = "vtac";
+ clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+ };
+
+ sti-display-subsystem {
+ compatible = "st,sti-display-subsystem";
+ ranges;
+
+ sti-compositor@fd340000 {
+ compatible = "st,stih416-compositor";
+ reg = <0xfd340000 0x1000>;
+ clock-names = "compo_main", "compo_aux",
+ "pix_main", "pix_aux";
+ clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>,
+ <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>;
+ reset-names = "compo-main", "compo-aux";
+ resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
+ st,vtg = <&vtg_main>, <&vtg_aux>;
+ };
+
+ sti-tvout@fe000000 {
+ compatible = "st,stih416-tvout";
+ reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
+ reg-names = "tvout-reg", "hda-reg", "syscfg";
+ reset-names = "tvout";
+ resets = <&softreset STIH416_HDTVOUT_SOFTRESET>;
+ ranges;
+
+ sti-hdmi@fe85c000 {
+ compatible = "st,stih416-hdmi";
+ reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+ reg-names = "hdmi-reg", "syscfg";
+ interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix", "tmds", "phy", "audio";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
+ hdmi,hpd-gpio = <&PIO2 5>;
+ };
+
+ sti-hda@fe85a000 {
+ compatible = "st,stih416-hda";
+ reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix", "hddac";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
+ };
+ };
+ };
+ ...
+};
diff --git a/drivers/gpu/drm/sti/NOTES b/drivers/gpu/drm/sti/NOTES
new file mode 100644
index 0000000..57e2579
--- /dev/null
+++ b/drivers/gpu/drm/sti/NOTES
@@ -0,0 +1,58 @@
+1. stiH display hardware IP
+---------------------------
+The STMicroelectronics stiH SoCs use a common chain of HW display IP blocks:
+- The High Quality Video Display Processor (HQVDP) gets video frames from a
+ video decoder and does high quality video processing, including scaling.
+
+- The Compositor is a multiplane, dual-mixer (Main & Aux) digital processor. It
+ has several inputs:
+ - The graphics planes are internally processed by the Generic Display
+ Pipeline (GDP).
+ - The video plug (VID) connects to the HQVDP output.
+ - The cursor handles ... a cursor.
+- The TV OUT pre-formats (convert, clip, round) the compositor output data
+- The HDMI / DVO / HD Analog / SD analog IP builds the video signals
+ - DVO (Digital Video Output) handles a 24bits parallel signal
+ - The HD analog signal is typically driven by a YCbCr cable, supporting up to
+ 1080i mode.
+ - The SD analog signal is typically used for legacy TV
+- The VTG (Video Timing Generators) build Vsync signals used by the other HW IP
+Note that some stiH drivers support only a subset of thee HW IP.
+
+ .-------------. .-----------. .-----------.
+GPU >-------------+GDP Main | | +---+ HDMI +--> HDMI
+GPU >-------------+GDP mixer+---+ | :===========:
+GPU >-------------+Cursor | | +---+ DVO +--> 24b//
+ ------- | COMPOSITOR | | TV OUT | :===========:
+ | | | | | +---+ HD analog +--> YCbCr
+Vid >--+ HQVDP +--+VID Aux +---+ | :===========:
+dec | | | mixer| | +---+ SD analog +--> CVBS
+ '-------' '-------------' '-----------' '-----------'
+ .-----------.
+ | main+--> Vsync
+ | VTG |
+ | aux+--> Vsync
+ '-----------'
+
+2. DRM / HW mapping
+-------------------
+These IP are mapped to the DRM objects as following:
+- The CRTCs are mapped to the Compositor Main and Aux Mixers
+- The Framebuffers and planes are mapped to the Compositor GDP (non video
+ buffers) and to HQVDP+VID (video buffers)
+- The Cursor is mapped to the Compositor Cursor
+- The Encoders are mapped to the TVOut
+- The Bridges/Connectors are mapped to the HDMI / DVO / HD Analog / SD analog
+
+FB & planes Cursor CRTC Encoders Bridges/Connectors
+ | | | | |
+ | | | | |
+ | .-------------. | .-----------. .-----------. |
+ +------------> |GDP | Main | | | +-> | | HDMI | <-+
+ +------------> |GDP v mixer|<+ | | | :===========: |
+ | |Cursor | | | +-> | | DVO | <-+
+ | ------- | COMPOSITOR | | |TV OUT | | :===========: |
+ | | | | | | | +-> | | HD analog | <-+
+ +-> | HQVDP | |VID Aux |<+ | | | :===========: |
+ | | | mixer| | +-> | | SD analog | <-+
+ '-------' '-------------' '-----------' '-----------'
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/