[PATCH v4 3/3] ARM: dts: qcom: add pm8941 and pm8841 PMICs device nodes
From: Stanimir Varbanov
Date: Fri Aug 01 2014 - 10:33:55 EST
The pm8941 and pm8841 spmi devicetree nodes are childrens of
spmi pmic arbiter. The msm8974 SoC uses two PMIC chips
pm8941 and pm8841. Every PMIC chip has two spmi bus slave id's.
Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 37 +++++++++++++++++++++++++++++++++++
1 files changed, 37 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 69dca2a..5e08d43 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -3,6 +3,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/spmi/spmi.h>
/ {
model = "Qualcomm MSM8974";
@@ -236,5 +237,41 @@
#interrupt-cells = <2>;
interrupts = <0 208 0>;
};
+
+ spmi@fc4cf000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+ interrupt-names = "periph_irq";
+ interrupts = <0 190 0>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ pm8941@0 {
+ compatible = "qcom,pm8941";
+ reg = <0x0 SPMI_USID>;
+ };
+
+ pm8941@1 {
+ compatible = "qcom,pm8941";
+ reg = <0x1 SPMI_USID>;
+ };
+
+ pm8841@4 {
+ compatible = "qcom,pm8841";
+ reg = <0x4 SPMI_USID>;
+ };
+
+ pm8841@5 {
+ compatible = "qcom,pm8841";
+ reg = <0x5 SPMI_USID>;
+ };
+ };
};
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/