[PATCH 9/9] drm: add Rockchip Soc rk3288 edp connector
From: mark yao
Date: Mon Aug 04 2014 - 00:58:47 EST
Signed-off-by: mark yao <yzq@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/rockchip/connector/Kconfig | 9 +
drivers/gpu/drm/rockchip/connector/Makefile | 1 +
.../gpu/drm/rockchip/connector/rk3288_dp_core.c | 586 ++++++++++
.../gpu/drm/rockchip/connector/rk3288_dp_core.h | 355 ++++++
drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c | 1192 ++++++++++++++++++++
drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h | 378 +++++++
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 13 +
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 +
8 files changed, 2537 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/connector/rk3288_dp_core.c
create mode 100644 drivers/gpu/drm/rockchip/connector/rk3288_dp_core.h
create mode 100644 drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c
create mode 100644 drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h
diff --git a/drivers/gpu/drm/rockchip/connector/Kconfig b/drivers/gpu/drm/rockchip/connector/Kconfig
index 248942f..caffc5b 100644
--- a/drivers/gpu/drm/rockchip/connector/Kconfig
+++ b/drivers/gpu/drm/rockchip/connector/Kconfig
@@ -6,3 +6,12 @@ config RK3288_LVDS
rk3288 lvds transmitter support ttl rgb, lvds and dual lvds
mode, dual lvds mode is support for the plane which need dual
lvds channels.
+
+config RK3288_DP
+ bool "RK3288 edp connector support"
+ depends on DRM_ROCKCHIP_CONNECTOR
+ help
+ Choose this option if you have a rk32xx eDP connector.
+ Rockchip rk3288 SoC has eDP TX Controller can be used.
+ If you have an Embedded DisplayPort Panel, say Y to enable its
+ driver.
diff --git a/drivers/gpu/drm/rockchip/connector/Makefile b/drivers/gpu/drm/rockchip/connector/Makefile
index dcfbdef..4be77ea 100644
--- a/drivers/gpu/drm/rockchip/connector/Makefile
+++ b/drivers/gpu/drm/rockchip/connector/Makefile
@@ -2,3 +2,4 @@
# Makefile for display connector like lvds edp mipi
#
obj-$(CONFIG_RK3288_LVDS) += rk3288_lvds.o
+obj-$(CONFIG_RK3288_DP) += rk3288_dp_core.o rk3288_dp_reg.o
diff --git a/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.c b/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.c
new file mode 100644
index 0000000..3756383
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.c
@@ -0,0 +1,586 @@
+/*
+* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+* Author:
+* yxj <yxj@xxxxxxxxxxxxxx>
+* cym <cym@xxxxxxxxxxxxxx>
+*
+* based on exynos_dp_core.c
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/of.h>
+
+#include "rk3288_dp_core.h"
+
+static int rk3288_edp_clk_enable(struct rk3288_edp *edp)
+{
+ int ret = 0;
+
+ if (!edp->clk_on) {
+ ret = clk_prepare_enable(edp->pclk);
+ if (ret < 0) {
+ dev_err(edp->dev, "cannot enable edp pclk %d\n", ret);
+ goto err_pclk;
+ }
+
+ ret = clk_prepare_enable(edp->clk_edp);
+ if (ret < 0) {
+ dev_err(edp->dev, "cannot enable clk_edp %d\n", ret);
+ goto err_clk_edp;
+ }
+
+ ret = clk_set_parent(edp->clk_24m, edp->clk_24m_parent);
+ if (ret < 0) {
+ dev_err(edp->dev, "cannot set edp clk_24m parent %d\n",
+ ret);
+ goto err_clk_24m;
+ }
+
+ ret = clk_prepare_enable(edp->clk_24m);
+ if (ret < 0) {
+ dev_err(edp->dev, "cannot enable edp clk_24m %d\n",
+ ret);
+ goto err_clk_24m;
+ }
+
+ edp->clk_on = true;
+ }
+
+ return 0;
+
+err_clk_24m:
+ clk_disable_unprepare(edp->clk_edp);
+err_clk_edp:
+ clk_disable_unprepare(edp->pclk);
+err_pclk:
+ edp->clk_on = false;
+
+ return ret;
+}
+
+static int rk3288_edp_clk_disable(struct rk3288_edp *edp)
+{
+ if (edp->clk_on) {
+ clk_disable_unprepare(edp->pclk);
+ clk_disable_unprepare(edp->clk_edp);
+ clk_disable_unprepare(edp->clk_24m);
+ edp->clk_on = false;
+ }
+
+ return 0;
+}
+
+static int rk3288_edp_pre_init(struct rk3288_edp *edp)
+{
+ u32 val;
+ int ret = 0;
+
+ val = GRF_EDP_REF_CLK_SEL_INTER | (GRF_EDP_REF_CLK_SEL_INTER << 16);
+ ret = regmap_write(edp->grf, edp->soc_data->grf_soc_con12, val);
+ if (ret != 0) {
+ dev_err(edp->dev, "Could not write to GRF: %d\n", ret);
+ return ret;
+ }
+
+ reset_control_assert(edp->rst);
+ usleep_range(10, 20);
+ reset_control_deassert(edp->rst);
+
+ return 0;
+}
+
+static int rk3288_edp_init_edp(struct rk3288_edp *edp)
+{
+ int lcdc_id = 1;
+ u32 val = 0;
+ int ret = 0;
+
+ /* select lcdc */
+ if (lcdc_id == 1)
+ val = EDP_SEL_VOP_LIT | (EDP_SEL_VOP_LIT << 16);
+ else
+ val = EDP_SEL_VOP_LIT << 16;
+ ret = regmap_write(edp->grf, edp->soc_data->grf_soc_con6, val);
+ if (ret != 0) {
+ dev_err(edp->dev, "Could not write to GRF: %d\n", ret);
+ return ret;
+ }
+
+ rk3288_edp_reset(edp);
+ rk3288_edp_init_refclk(edp);
+ rk3288_edp_init_interrupt(edp);
+ rk3288_edp_enable_sw_function(edp);
+ rk3288_edp_init_analog_func(edp);
+ rk3288_edp_init_hpd(edp);
+ rk3288_edp_init_aux(edp);
+
+ return 0;
+}
+
+static int rk3288_edp_get_max_rx_bandwidth(
+ struct rk3288_edp *edp,
+ u8 *bandwidth)
+{
+ u8 data;
+ int retval = 0;
+
+ /*
+ * For DP rev.1.1, Maximum link rate of Main Link lanes
+ * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+ */
+ retval = rk3288_edp_read_byte_from_dpcd(
+ edp, DPCD_ADDR_MAX_LINK_RATE, &data);
+ if (retval < 0)
+ *bandwidth = 0;
+ else
+ *bandwidth = data;
+
+ return retval;
+}
+
+static int rk3288_edp_get_max_rx_lane_count(struct rk3288_edp *edp,
+ u8 *lane_count)
+{
+ u8 data;
+ int retval;
+
+ /*
+ * For DP rev.1.1, Maximum number of Main Link lanes
+ * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
+ */
+ retval = rk3288_edp_read_byte_from_dpcd(
+ edp, DPCD_ADDR_MAX_LANE_COUNT, &data);
+ if (retval < 0)
+ *lane_count = 0;
+ else
+ *lane_count = DPCD_MAX_LANE_COUNT(data);
+
+ return retval;
+}
+
+static int rk3288_edp_init_training(struct rk3288_edp *edp)
+{
+ int retval;
+
+ /*
+ * MACRO_RST must be applied after the PLL_LOCK to avoid
+ * the DP inter pair skew issue for at least 10 us
+ */
+ rk3288_edp_reset_macro(edp);
+
+ retval = rk3288_edp_get_max_rx_bandwidth(
+ edp, &edp->link_train.link_rate);
+ retval = rk3288_edp_get_max_rx_lane_count(
+ edp, &edp->link_train.lane_count);
+ dev_dbg(edp->dev, "max link rate:%d.%dGps max number of lanes:%d\n",
+ edp->link_train.link_rate * 27/100,
+ edp->link_train.link_rate*27%100,
+ edp->link_train.lane_count);
+
+ if ((edp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
+ (edp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ dev_warn(edp->dev, "Rx Max Link Rate is abnormal :%x !\n"
+ "use default link rate:%d.%dGps\n",
+ edp->link_train.link_rate,
+ edp->video_info.link_rate*27/100,
+ edp->video_info.link_rate*27%100);
+ edp->link_train.link_rate = edp->video_info.link_rate;
+ }
+
+ if (edp->link_train.lane_count == 0) {
+ dev_err(edp->dev, "Rx Max Lane count is abnormal :%x !\n"
+ "use default lanes:%d\n",
+ edp->link_train.lane_count,
+ edp->video_info.lane_count);
+ edp->link_train.lane_count = edp->video_info.lane_count;
+ }
+
+ rk3288_edp_analog_power_ctr(edp, 1);
+
+ return 0;
+}
+
+static int rk3288_edp_hw_link_training(struct rk3288_edp *edp)
+{
+ u32 cnt = 50;
+ u32 val;
+
+ /* Set link rate and count as you want to establish*/
+ rk3288_edp_set_link_bandwidth(edp, edp->link_train.link_rate);
+ rk3288_edp_set_lane_count(edp, edp->link_train.lane_count);
+ rk3288_edp_hw_link_training_en(edp);
+ val = rk3288_edp_wait_hw_lt_done(edp);
+ while (val) {
+ if (cnt-- <= 0) {
+ dev_err(edp->dev, "hw lt timeout");
+ return -ETIMEDOUT;
+ }
+ mdelay(1);
+ val = rk3288_edp_wait_hw_lt_done(edp);
+ }
+
+ val = rk3288_edp_get_hw_lt_status(edp);
+ if (val)
+ dev_err(edp->dev, "hw lt err:%d\n", val);
+
+ return val;
+}
+
+static int rk3288_edp_set_link_train(struct rk3288_edp *edp)
+{
+ int retval;
+
+ rk3288_edp_init_training(edp);
+
+ retval = rk3288_edp_hw_link_training(edp);
+ if (retval < 0)
+ dev_err(edp->dev, "DP hw LT failed!\n");
+
+ return retval;
+}
+
+static int rk3288_edp_config_video(struct rk3288_edp *edp,
+ struct video_info *video_info)
+{
+ int retval = 0;
+ int timeout_loop = 0;
+ int done_count = 0;
+
+ rk3288_edp_config_video_slave_mode(edp, video_info);
+
+ rk3288_edp_set_video_color_format(edp, video_info->color_depth,
+ video_info->color_space,
+ video_info->dynamic_range,
+ video_info->ycbcr_coeff);
+
+ if (rk3288_edp_get_pll_lock_status(edp) == DP_PLL_UNLOCKED) {
+ dev_err(edp->dev, "PLL is not locked yet.\n");
+ return -EINVAL;
+ }
+
+ for (;;) {
+ timeout_loop++;
+ if (rk3288_edp_is_slave_video_stream_clock_on(edp) == 0)
+ break;
+
+ if (DP_TIMEOUT_LOOP_CNT < timeout_loop) {
+ dev_err(edp->dev, "Timeout of video streamclk ok\n");
+ return -ETIMEDOUT;
+ }
+
+ udelay(1);
+ }
+
+ /* Set to use the register calculated M/N video */
+ rk3288_edp_set_video_cr_mn(edp, CALCULATED_M, 0, 0);
+
+ /* Disable video mute */
+ rk3288_edp_enable_video_mute(edp, 0);
+
+ /* Configure video slave mode */
+ rk3288_edp_enable_video_master(edp, 0);
+
+ /* Enable video */
+ rk3288_edp_start_video(edp);
+
+ timeout_loop = 0;
+
+ for (;;) {
+ timeout_loop++;
+ if (rk3288_edp_is_video_stream_on(edp) == 0) {
+ done_count++;
+ if (done_count > 10)
+ break;
+ } else if (done_count) {
+ done_count = 0;
+ }
+ if (DP_TIMEOUT_LOOP_CNT < timeout_loop) {
+ dev_err(edp->dev, "Timeout of video streamclk ok\n");
+ return -ETIMEDOUT;
+ }
+
+ mdelay(1);
+ }
+
+ if (retval != 0)
+ dev_err(edp->dev, "Video stream is not detected!\n");
+
+ return retval;
+}
+
+static irqreturn_t rk3288_edp_isr(int irq, void *arg)
+{
+ struct rk3288_edp *edp = arg;
+ enum dp_irq_type irq_type;
+
+ irq_type = rk3288_edp_get_irq_type(edp);
+ switch (irq_type) {
+ case DP_IRQ_TYPE_HP_CABLE_IN:
+ dev_dbg(edp->dev, "Received irq - cable in\n");
+ rk3288_edp_clear_hotplug_interrupts(edp);
+ break;
+ case DP_IRQ_TYPE_HP_CABLE_OUT:
+ dev_dbg(edp->dev, "Received irq - cable out\n");
+ rk3288_edp_clear_hotplug_interrupts(edp);
+ break;
+ case DP_IRQ_TYPE_HP_CHANGE:
+ /*
+ * We get these change notifications once in a while, but there
+ * is nothing we can do with them. Just ignore it for now and
+ * only handle cable changes.
+ */
+ dev_dbg(edp->dev, "Received irq - hotplug change; ignoring.\n");
+ rk3288_edp_clear_hotplug_interrupts(edp);
+ break;
+ default:
+ dev_err(edp->dev, "Received irq - unknown type[%x]!\n",
+ irq_type);
+ rk3288_edp_clear_hotplug_interrupts(edp);
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void rk3288_edp_enable(struct rockchip_connector *conn)
+{
+ struct rk3288_edp *edp = conn->priv;
+ int ret = 0;
+
+ ret = rk3288_edp_clk_enable(edp);
+ if (ret < 0) {
+ dev_err(edp->dev, "cannot enable edp clk %d\n", ret);
+ return;
+ }
+
+ ret = rk3288_edp_pre_init(edp);
+ if (ret < 0) {
+ dev_err(edp->dev, "edp pre init fail %d\n", ret);
+ return;
+ }
+
+ ret = rk3288_edp_init_edp(edp);
+ if (ret < 0) {
+ dev_err(edp->dev, "edp init fail %d\n", ret);
+ return;
+ }
+
+ enable_irq(edp->irq);
+
+ ret = rk3288_edp_set_link_train(edp);
+ if (ret)
+ dev_err(edp->dev, "link train failed!\n");
+ else
+ dev_dbg(edp->dev, "link training success.\n");
+
+ rk3288_edp_set_lane_count(edp, edp->link_train.lane_count);
+ rk3288_edp_set_link_bandwidth(edp, edp->link_train.link_rate);
+ rk3288_edp_init_video(edp);
+
+ ret = rk3288_edp_config_video(edp, &edp->video_info);
+ if (ret)
+ dev_err(edp->dev, "unable to config video\n");
+}
+
+static void rk3288_edp_disable(struct rockchip_connector *conn)
+{
+ struct rk3288_edp *edp = conn->priv;
+
+ disable_irq(edp->irq);
+ rk3288_edp_reset(edp);
+ rk3288_edp_analog_power_ctr(edp, 0);
+ rk3288_edp_clk_disable(edp);
+}
+
+static int rk3288_edp_setmode(struct rockchip_connector *conn,
+ struct drm_display_mode *mode)
+{
+ struct rk3288_edp *edp = conn->priv;
+
+ memcpy(&edp->mode, mode, sizeof(*mode));
+
+ return 0;
+}
+
+static struct rockchip_connector edp_conn = {
+ .enable = rk3288_edp_enable,
+ .disable = rk3288_edp_disable,
+ .setmode = rk3288_edp_setmode,
+};
+
+static struct rk3288_edp_soc_data soc_data[2] = {
+ {.grf_soc_con6 = 0x025c,
+ .grf_soc_con12 = 0x0274},
+ {.grf_soc_con6 = -1,
+ .grf_soc_con12 = -1},
+};
+
+static const struct of_device_id rk3288_edp_dt_ids[] = {
+ {.compatible = "rockchip,rk3288-edp",
+ .data = (void *)&soc_data[0]},
+ {}
+};
+MODULE_DEVICE_TABLE(of, rk3288_edp_dt_ids);
+
+static int rk3288_edp_probe(struct platform_device *pdev)
+{
+ struct rk3288_edp *edp;
+ struct resource *res;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ int ret = 0;
+
+ if (!np) {
+ dev_err(&pdev->dev, "Missing device tree node.\n");
+ return -EINVAL;
+ }
+
+ edp = devm_kzalloc(&pdev->dev, sizeof(struct rk3288_edp), GFP_KERNEL);
+ if (!edp) {
+ dev_err(&pdev->dev, "no memory for state\n");
+ return -ENOMEM;
+ }
+
+ match = of_match_node(rk3288_edp_dt_ids, np);
+ edp->soc_data = (struct rk3288_edp_soc_data *)match->data;
+ /*
+ * The control bit is located in the GRF register space.
+ */
+ if (edp->soc_data->grf_soc_con6 >= 0) {
+ edp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+ if (IS_ERR(edp->grf)) {
+ dev_err(&pdev->dev,
+ "rk3288-edp needs rockchip,grf property\n");
+ return PTR_ERR(edp->grf);
+ }
+ }
+
+ edp->dev = &pdev->dev;
+ edp->video_info.h_sync_polarity = 0;
+ edp->video_info.v_sync_polarity = 0;
+ edp->video_info.interlaced = 0;
+ edp->video_info.color_space = CS_RGB;
+ edp->video_info.dynamic_range = VESA;
+ edp->video_info.ycbcr_coeff = COLOR_YCBCR601;
+ edp->video_info.color_depth = COLOR_8;
+
+ edp->video_info.link_rate = LINK_RATE_1_62GBPS;
+ edp->video_info.lane_count = LANE_CNT4;
+ edp_conn.type = ROCKCHIP_DISPLAY_TYPE_EDP;
+ edp_conn.priv = edp;
+ edp_conn.dev = &pdev->dev;
+
+ edp->base = rockchip_connector_register(&edp_conn);
+ if (!edp->base) {
+ dev_err(&pdev->dev, "connector register fail\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ edp->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(edp->regs)) {
+ dev_err(&pdev->dev, "ioremap reg failed\n");
+ return PTR_ERR(edp->regs);
+ }
+
+ edp->clk_edp = devm_clk_get(&pdev->dev, "clk_edp");
+ if (IS_ERR(edp->clk_edp)) {
+ dev_err(&pdev->dev, "cannot get clk_edp\n");
+ return PTR_ERR(edp->clk_edp);
+ }
+
+ edp->clk_24m_parent = devm_clk_get(&pdev->dev, "clk_edp_24m_parent");
+ if (IS_ERR(edp->clk_24m_parent)) {
+ dev_err(&pdev->dev, "cannot get clk_edp_24m_parent\n");
+ return PTR_ERR(edp->clk_24m_parent);
+ }
+
+ edp->clk_24m = devm_clk_get(&pdev->dev, "clk_edp_24m");
+ if (IS_ERR(edp->clk_24m)) {
+ dev_err(&pdev->dev, "cannot get clk_edp_24m\n");
+ return PTR_ERR(edp->clk_24m);
+ }
+
+ edp->pclk = devm_clk_get(&pdev->dev, "pclk_edp");
+ if (IS_ERR(edp->pclk)) {
+ dev_err(&pdev->dev, "cannot get pclk\n");
+ return PTR_ERR(edp->pclk);
+ }
+
+ edp->rst = devm_reset_control_get(&pdev->dev, "edp");
+ if (IS_ERR(edp->rst)) {
+ dev_err(&pdev->dev, "failed to get reset\n");
+ return PTR_ERR(edp->rst);
+ }
+
+ ret = rk3288_edp_clk_enable(edp);
+ if (ret < 0) {
+ dev_err(edp->dev, "cannot enable edp clk %d\n", ret);
+ return ret;
+ }
+
+ ret = rk3288_edp_pre_init(edp);
+ if (ret < 0) {
+ dev_err(edp->dev, "failed to pre init %d\n", ret);
+ return ret;
+ }
+
+ edp->irq = platform_get_irq(pdev, 0);
+ if (edp->irq < 0) {
+ dev_err(&pdev->dev, "cannot find IRQ\n");
+ return edp->irq;
+ }
+
+ ret = devm_request_irq(&pdev->dev, edp->irq, rk3288_edp_isr, 0,
+ dev_name(&pdev->dev), edp);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot claim IRQ %d\n", edp->irq);
+ return ret;
+ }
+
+ disable_irq_nosync(edp->irq);
+
+ edp->standby = true;
+
+ platform_set_drvdata(pdev, edp);
+ dev_set_name(edp->dev, "rk3288-edp");
+
+ dev_info(&pdev->dev, "rk3288 edp driver probe success\n");
+
+ return 0;
+}
+
+static int rk3288_edp_remove(struct platform_device *pdev)
+{
+ rk3288_edp_disable(&edp_conn);
+
+ return 0;
+}
+
+struct platform_driver rk3288_edp_driver = {
+ .probe = rk3288_edp_probe,
+ .remove = rk3288_edp_remove,
+ .driver = {
+ .name = "rk3288-edp",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rk3288_edp_dt_ids),
+ },
+};
diff --git a/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.h b/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.h
new file mode 100644
index 0000000..d71df70
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.h
@@ -0,0 +1,355 @@
+/*
+* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+* Author:
+* yxj <yxj@xxxxxxxxxxxxxx>
+* cym <cym@xxxxxxxxxxxxxx>
+*
+* based on exynos_dp_core.h
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+#ifndef __RK3288_DP_H
+#define __RK3288_DP_H
+#include "../rockchip_drm_connector.h"
+
+#define DP_TIMEOUT_LOOP_CNT 100
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 5
+
+#define GRF_EDP_REF_CLK_SEL_INTER (1 << 4)
+#define GRF_EDP_HDCP_EN (1 << 15)
+#define GRF_EDP_BIST_EN (1 << 14)
+#define GRF_EDP_MEM_CTL_BY_EDP (1 << 13)
+#define GRF_EDP_SECURE_EN (1 << 3)
+#define EDP_SEL_VOP_LIT (1 << 5)
+
+enum dp_irq_type {
+ DP_IRQ_TYPE_HP_CABLE_IN,
+ DP_IRQ_TYPE_HP_CABLE_OUT,
+ DP_IRQ_TYPE_HP_CHANGE,
+ DP_IRQ_TYPE_UNKNOWN,
+};
+
+enum color_coefficient {
+ COLOR_YCBCR601,
+ COLOR_YCBCR709
+};
+
+enum dynamic_range {
+ VESA,
+ CEA
+};
+
+enum pll_status {
+ DP_PLL_UNLOCKED,
+ DP_PLL_LOCKED
+};
+
+enum clock_recovery_m_value_type {
+ CALCULATED_M,
+ REGISTER_M
+};
+
+enum video_timing_recognition_type {
+ VIDEO_TIMING_FROM_CAPTURE,
+ VIDEO_TIMING_FROM_REGISTER
+};
+
+enum pattern_set {
+ PRBS7,
+ D10_2,
+ TRAINING_PTN1,
+ TRAINING_PTN2,
+ DP_NONE
+};
+
+enum color_space {
+ CS_RGB,
+ CS_YCBCR422,
+ CS_YCBCR444
+};
+
+enum color_depth {
+ COLOR_6,
+ COLOR_8,
+ COLOR_10,
+ COLOR_12
+};
+
+enum link_rate_type {
+ LINK_RATE_1_62GBPS = 0x06,
+ LINK_RATE_2_70GBPS = 0x0a
+};
+
+enum link_lane_count_type {
+ LANE_CNT1 = 1,
+ LANE_CNT2 = 2,
+ LANE_CNT4 = 4
+};
+
+enum link_training_state {
+ LT_START,
+ LT_CLK_RECOVERY,
+ LT_EQ_TRAINING,
+ FINISHED,
+ FAILED
+};
+
+enum voltage_swing_level {
+ VOLTAGE_LEVEL_0,
+ VOLTAGE_LEVEL_1,
+ VOLTAGE_LEVEL_2,
+ VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+ PRE_EMPHASIS_LEVEL_0,
+ PRE_EMPHASIS_LEVEL_1,
+ PRE_EMPHASIS_LEVEL_2,
+ PRE_EMPHASIS_LEVEL_3,
+};
+
+enum analog_power_block {
+ AUX_BLOCK,
+ CH0_BLOCK,
+ CH1_BLOCK,
+ CH2_BLOCK,
+ CH3_BLOCK,
+ ANALOG_TOTAL,
+ POWER_ALL
+};
+
+struct video_info {
+ char *name;
+
+ bool h_sync_polarity;
+ bool v_sync_polarity;
+ bool interlaced;
+
+ enum color_space color_space;
+ enum dynamic_range dynamic_range;
+ enum color_coefficient ycbcr_coeff;
+ enum color_depth color_depth;
+
+ enum link_rate_type link_rate;
+ enum link_lane_count_type lane_count;
+};
+
+struct link_train {
+ int eq_loop;
+ int cr_loop[4];
+
+ u8 link_rate;
+ u8 lane_count;
+ u8 training_lane[4];
+
+ enum link_training_state lt_state;
+};
+
+/*
+ * @grf_offset: offset inside the grf regmap for setting the rk3288 lvds
+ */
+struct rk3288_edp_soc_data {
+ int grf_soc_con6;
+ int grf_soc_con12;
+};
+
+struct rk3288_edp {
+ void *base;
+ struct drm_display_mode mode;
+ struct device *dev;
+ void __iomem *regs;
+ struct regmap *grf;
+ struct rk3288_edp_soc_data *soc_data;
+ unsigned int irq;
+ /* clk for edp controller */
+ struct clk *clk_edp;
+ /* clk for edp phy parent */
+ struct clk *clk_24m_parent;
+ /* clk for edp phy */
+ struct clk *clk_24m;
+ /* clk for phb bus */
+ struct clk *pclk;
+ struct reset_control *rst;
+ struct link_train link_train;
+ struct video_info video_info;
+ bool clk_on;
+ bool standby;
+};
+
+void rk3288_edp_enable_video_mute(struct rk3288_edp *edp, bool enable);
+void rk3288_edp_stop_video(struct rk3288_edp *edp);
+void rk3288_edp_lane_swap(struct rk3288_edp *edp, bool enable);
+void rk3288_edp_init_refclk(struct rk3288_edp *edp);
+void rk3288_edp_init_interrupt(struct rk3288_edp *edp);
+void rk3288_edp_reset(struct rk3288_edp *edp);
+void rk3288_edp_config_interrupt(struct rk3288_edp *edp);
+u32 rk3288_edp_get_pll_lock_status(struct rk3288_edp *edp);
+void rk3288_edp_analog_power_ctr(struct rk3288_edp *edp, bool enable);
+void rk3288_edp_init_analog_func(struct rk3288_edp *edp);
+void rk3288_edp_init_hpd(struct rk3288_edp *edp);
+void rk3288_edp_reset_aux(struct rk3288_edp *edp);
+void rk3288_edp_init_aux(struct rk3288_edp *edp);
+int rk3288_edp_get_plug_in_status(struct rk3288_edp *edp);
+void rk3288_edp_enable_sw_function(struct rk3288_edp *edp);
+int rk3288_edp_start_aux_transaction(struct rk3288_edp *edp);
+int rk3288_edp_write_byte_to_dpcd(struct rk3288_edp *edp,
+ unsigned int reg_addr,
+ unsigned char data);
+int rk3288_edp_read_byte_from_dpcd(struct rk3288_edp *edp,
+ unsigned int reg_addr,
+ unsigned char *data);
+int rk3288_edp_write_bytes_to_dpcd(struct rk3288_edp *edp,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[]);
+int rk3288_edp_read_bytes_from_dpcd(struct rk3288_edp *edp,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[]);
+int rk3288_edp_select_i2c_device(struct rk3288_edp *edp,
+ unsigned int device_addr,
+ unsigned int reg_addr);
+int rk3288_edp_read_byte_from_i2c(struct rk3288_edp *edp,
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int *data);
+int rk3288_edp_read_bytes_from_i2c(struct rk3288_edp *edp,
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char edid[]);
+void rk3288_edp_set_link_bandwidth(struct rk3288_edp *edp, u32 bwtype);
+void rk3288_edp_get_link_bandwidth(struct rk3288_edp *edp, u32 *bwtype);
+void rk3288_edp_set_lane_count(struct rk3288_edp *edp, u32 count);
+void rk3288_edp_get_lane_count(struct rk3288_edp *edp, u32 *count);
+void rk3288_edp_enable_enhanced_mode(struct rk3288_edp *edp, bool enable);
+void rk3288_edp_set_training_pattern(struct rk3288_edp *edp,
+ enum pattern_set pattern);
+void rk3288_edp_set_lane0_pre_emphasis(struct rk3288_edp *edp, u32 level);
+void rk3288_edp_set_lane1_pre_emphasis(struct rk3288_edp *edp, u32 level);
+void rk3288_edp_set_lane2_pre_emphasis(struct rk3288_edp *edp, u32 level);
+void rk3288_edp_set_lane3_pre_emphasis(struct rk3288_edp *edp, u32 level);
+void rk3288_edp_set_lane0_link_training(struct rk3288_edp *edp,
+ u32 training_lane);
+void rk3288_edp_set_lane1_link_training(struct rk3288_edp *edp,
+ u32 training_lane);
+void rk3288_edp_set_lane2_link_training(struct rk3288_edp *edp,
+ u32 training_lane);
+void rk3288_edp_set_lane3_link_training(struct rk3288_edp *edp,
+ u32 training_lane);
+u32 rk3288_edp_get_lane0_link_training(struct rk3288_edp *edp);
+u32 rk3288_edp_get_lane1_link_training(struct rk3288_edp *edp);
+u32 rk3288_edp_get_lane2_link_training(struct rk3288_edp *edp);
+u32 rk3288_edp_get_lane3_link_training(struct rk3288_edp *edp);
+void rk3288_edp_reset_macro(struct rk3288_edp *edp);
+int rk3288_edp_init_video(struct rk3288_edp *edp);
+
+void rk3288_edp_set_video_color_format(struct rk3288_edp *edp,
+ u32 color_depth,
+ u32 color_space,
+ u32 dynamic_range,
+ u32 coeff);
+int rk3288_edp_is_slave_video_stream_clock_on(struct rk3288_edp *edp);
+void rk3288_edp_set_video_cr_mn(
+ struct rk3288_edp *edp,
+ enum clock_recovery_m_value_type type,
+ u32 m_value,
+ u32 n_value);
+void rk3288_edp_set_video_timing_mode(struct rk3288_edp *edp, u32 type);
+void rk3288_edp_enable_video_master(struct rk3288_edp *edp, bool enable);
+void rk3288_edp_start_video(struct rk3288_edp *edp);
+int rk3288_edp_is_video_stream_on(struct rk3288_edp *edp);
+void rk3288_edp_config_video_slave_mode(struct rk3288_edp *edp,
+ struct video_info *video_info);
+void rk3288_edp_enable_scrambling(struct rk3288_edp *edp);
+void rk3288_edp_disable_scrambling(struct rk3288_edp *edp);
+void rk3288_edp_rx_control(struct rk3288_edp *edp, bool enable);
+int rk3288_edp_bist_cfg(struct rk3288_edp *edp);
+void rk3288_edp_hw_link_training_en(struct rk3288_edp *edp);
+int rk3288_edp_get_hw_lt_status(struct rk3288_edp *edp);
+int rk3288_edp_wait_hw_lt_done(struct rk3288_edp *edp);
+enum dp_irq_type rk3288_edp_get_irq_type(struct rk3288_edp *edp);
+void rk3288_edp_clear_hotplug_interrupts(struct rk3288_edp *edp);
+
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR 0x50
+#define I2C_E_EDID_DEVICE_ADDR 0x30
+
+#define EDID_BLOCK_LENGTH 0x80
+#define EDID_HEADER_PATTERN 0x00
+#define EDID_EXTENSION_FLAG 0x7e
+#define EDID_CHECKSUM 0x7f
+
+/* Definition for DPCD Register */
+#define DPCD_ADDR_DPCD_REV 0x0000
+#define DPCD_ADDR_MAX_LINK_RATE 0x0001
+#define DPCD_ADDR_MAX_LANE_COUNT 0x0002
+#define DPCD_ADDR_LINK_BW_SET 0x0100
+#define DPCD_ADDR_LANE_COUNT_SET 0x0101
+#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102
+#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103
+#define DPCD_ADDR_LANE0_1_STATUS 0x0202
+#define DPCD_ADDR_LANE_ALIGN_STATUS_UPDATED 0x0204
+#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206
+#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207
+#define DPCD_ADDR_TEST_REQUEST 0x0218
+#define DPCD_ADDR_TEST_RESPONSE 0x0260
+#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261
+#define DPCD_ADDR_SINK_POWER_STATE 0x0600
+
+/* DPCD_ADDR_MAX_LANE_COUNT */
+#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
+#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
+
+/* DPCD_ADDR_LANE_COUNT_SET */
+#define DPCD_ENHANCED_FRAME_EN (0x1 << 7)
+#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
+
+/* DPCD_ADDR_TRAINING_PATTERN_SET */
+#define DPCD_SCRAMBLING_DISABLED (0x1 << 5)
+#define DPCD_SCRAMBLING_ENABLED (0x0 << 5)
+#define DPCD_TRAINING_PATTERN_2 (0x2 << 0)
+#define DPCD_TRAINING_PATTERN_1 (0x1 << 0)
+#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0)
+
+/* DPCD_ADDR_TRAINING_LANE0_SET */
+#define DPCD_MAX_PRE_EMPHASIS_REACHED (0x1 << 5)
+#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
+#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
+#define DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 (0x0 << 3)
+#define DPCD_MAX_SWING_REACHED (0x1 << 2)
+#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
+#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
+#define DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0 (0x0 << 0)
+
+/* DPCD_ADDR_LANE0_1_STATUS */
+#define DPCD_LANE_SYMBOL_LOCKED (0x1 << 2)
+#define DPCD_LANE_CHANNEL_EQ_DONE (0x1 << 1)
+#define DPCD_LANE_CR_DONE (0x1 << 0)
+#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE| \
+ DPCD_LANE_CHANNEL_EQ_DONE|\
+ DPCD_LANE_SYMBOL_LOCKED)
+
+/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */
+#define DPCD_LINK_STATUS_UPDATED (0x1 << 7)
+#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6)
+#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0)
+
+/* DPCD_ADDR_TEST_REQUEST */
+#define DPCD_TEST_EDID_READ (0x1 << 2)
+
+/* DPCD_ADDR_TEST_RESPONSE */
+#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2)
+
+/* DPCD_ADDR_SINK_POWER_STATE */
+#define DPCD_SET_POWER_STATE_D0 (0x1 << 0)
+#define DPCD_SET_POWER_STATE_D4 (0x2 << 0)
+
+#define DPCD_SYMBOL_ERR_CONUT_LANE0 0x210
+
+#endif
diff --git a/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c b/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c
new file mode 100644
index 0000000..f558cea
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c
@@ -0,0 +1,1192 @@
+/*
+* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+* Author:
+* yxj <yxj@xxxxxxxxxxxxxx>
+* cym <cym@xxxxxxxxxxxxxx>
+*
+* based on exynos_dp_reg.c
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "rk3288_dp_core.h"
+#include "rk3288_dp_reg.h"
+
+void rk3288_edp_enable_video_mute(struct rk3288_edp *edp, bool enable)
+{
+ u32 val;
+
+ if (enable) {
+ val = readl(edp->regs + VIDEO_CTL_1);
+ val |= VIDEO_MUTE;
+ writel(val, edp->regs + VIDEO_CTL_1);
+ } else {
+ val = readl(edp->regs + VIDEO_CTL_1);
+ val &= ~VIDEO_MUTE;
+ writel(val, edp->regs + VIDEO_CTL_1);
+ }
+}
+
+void rk3288_edp_stop_video(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + VIDEO_CTL_1);
+ val &= ~VIDEO_EN;
+ writel(val, edp->regs + VIDEO_CTL_1);
+}
+
+void rk3288_edp_lane_swap(struct rk3288_edp *edp, bool enable)
+{
+ u32 val;
+
+ if (enable)
+ val = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
+ LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
+ else
+ val = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
+ LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+
+ writel(val, edp->regs + LANE_MAP);
+}
+
+void rk3288_edp_init_refclk(struct rk3288_edp *edp)
+{
+ writel(SEL_24M, edp->regs + ANALOG_CTL_2);
+ writel(REF_CLK_24M, edp->regs + PLL_REG_1);
+
+ writel(0x95, edp->regs + PLL_REG_2);
+ writel(0x40, edp->regs + PLL_REG_3);
+ writel(0x58, edp->regs + PLL_REG_4);
+ writel(0x22, edp->regs + PLL_REG_5);
+ writel(0x19, edp->regs + SSC_REG);
+ writel(0x87, edp->regs + TX_REG_COMMON);
+ writel(0x03, edp->regs + DP_AUX);
+ writel(0x46, edp->regs + DP_BIAS);
+ writel(0x55, edp->regs + DP_RESERVE2);
+}
+
+void rk3288_edp_init_interrupt(struct rk3288_edp *edp)
+{
+ /* Set interrupt pin assertion polarity as high */
+ writel(INT_POL, edp->regs + INT_CTL);
+
+ /* Clear pending valisers */
+ writel(0xff, edp->regs + COMMON_INT_STA_1);
+ writel(0x4f, edp->regs + COMMON_INT_STA_2);
+ writel(0xff, edp->regs + COMMON_INT_STA_3);
+ writel(0x27, edp->regs + COMMON_INT_STA_4);
+
+ writel(0x7f, edp->regs + DP_INT_STA);
+
+ /* 0:mask,1: unmask */
+ writel(0x00, edp->regs + COMMON_INT_MASK_1);
+ writel(0x00, edp->regs + COMMON_INT_MASK_2);
+ writel(0x00, edp->regs + COMMON_INT_MASK_3);
+ writel(0x00, edp->regs + COMMON_INT_MASK_4);
+ writel(0x00, edp->regs + DP_INT_STA_MASK);
+}
+
+void rk3288_edp_reset(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ rk3288_edp_stop_video(edp);
+ rk3288_edp_enable_video_mute(edp, 0);
+
+ val = VID_CAP_FUNC_EN_N | AUD_FIFO_FUNC_EN_N |
+ AUD_FUNC_EN_N | HDCP_FUNC_EN_N | SW_FUNC_EN_N;
+ writel(val, edp->regs + FUNC_EN_1);
+
+ val = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
+ SERDES_FIFO_FUNC_EN_N |
+ LS_CLK_DOMAIN_FUNC_EN_N;
+ writel(val, edp->regs + FUNC_EN_2);
+
+ usleep_range(20, 30);
+
+ rk3288_edp_lane_swap(edp, 0);
+
+ writel(0x0, edp->regs + SYS_CTL_1);
+ writel(0x40, edp->regs + SYS_CTL_2);
+ writel(0x0, edp->regs + SYS_CTL_3);
+ writel(0x0, edp->regs + SYS_CTL_4);
+
+ writel(0x0, edp->regs + PKT_SEND_CTL);
+ writel(0x0, edp->regs + HDCP_CTL);
+
+ writel(0x5e, edp->regs + HPD_DEGLITCH_L);
+ writel(0x1a, edp->regs + HPD_DEGLITCH_H);
+
+ writel(0x10, edp->regs + LINK_DEBUG_CTL);
+
+ writel(0x0, edp->regs + VIDEO_FIFO_THRD);
+ writel(0x20, edp->regs + AUDIO_MARGIN);
+
+ writel(0x4, edp->regs + M_VID_GEN_FILTER_TH);
+ writel(0x2, edp->regs + M_AUD_GEN_FILTER_TH);
+
+ writel(0x0, edp->regs + SOC_GENERAL_CTL);
+}
+
+void rk3288_edp_config_interrupt(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ /* 0: mask, 1: unmask */
+ val = 0;
+ writel(val, edp->regs + COMMON_INT_MASK_1);
+
+ writel(val, edp->regs + COMMON_INT_MASK_2);
+
+ writel(val, edp->regs + COMMON_INT_MASK_3);
+
+ writel(val, edp->regs + COMMON_INT_MASK_4);
+
+ writel(val, edp->regs + DP_INT_STA_MASK);
+}
+
+u32 rk3288_edp_get_pll_lock_status(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + DEBUG_CTL);
+ if (val & PLL_LOCK)
+ return DP_PLL_LOCKED;
+ else
+ return DP_PLL_UNLOCKED;
+}
+
+void rk3288_edp_analog_power_ctr(struct rk3288_edp *edp, bool enable)
+{
+ u32 val;
+
+ if (enable) {
+ val = PD_EXP_BG | PD_AUX | PD_PLL |
+ PD_CH3 | PD_CH2 | PD_CH1 | PD_CH0;
+ writel(val, edp->regs + DP_PWRDN);
+ usleep_range(10, 20);
+ writel(0x0, edp->regs + DP_PWRDN);
+ } else {
+ val = PD_EXP_BG | PD_AUX | PD_PLL |
+ PD_CH3 | PD_CH2 | PD_CH1 | PD_CH0;
+ writel(val, edp->regs + DP_PWRDN);
+ }
+}
+
+void rk3288_edp_init_analog_func(struct rk3288_edp *edp)
+{
+ u32 val;
+ int wt = 0;
+
+ rk3288_edp_analog_power_ctr(edp, 1);
+
+ val = PLL_LOCK_CHG;
+ writel(val, edp->regs + COMMON_INT_STA_1);
+
+ val = readl(edp->regs + DEBUG_CTL);
+ val &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
+ writel(val, edp->regs + DEBUG_CTL);
+
+ /* Power up PLL */
+ while (wt < 100) {
+ if (rk3288_edp_get_pll_lock_status(edp) == DP_PLL_LOCKED) {
+ dev_dbg(edp->dev, "edp pll locked\n");
+ break;
+ } else {
+ wt++;
+ udelay(5);
+ }
+ }
+
+ /* Enable Serdes FIFO function and Link symbol clock domain module */
+ val = readl(edp->regs + FUNC_EN_2);
+ val &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
+ | AUX_FUNC_EN_N | SSC_FUNC_EN_N);
+ writel(val, edp->regs + FUNC_EN_2);
+}
+
+void rk3288_edp_init_hpd(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = HOTPLUG_CHG | HPD_LOST | PLUG;
+ writel(val, edp->regs + COMMON_INT_STA_4);
+
+ val = INT_HPD;
+ writel(val, edp->regs + DP_INT_STA);
+
+ val = readl(edp->regs + SYS_CTL_3);
+ val |= (F_HPD | HPD_CTRL);
+ writel(val, edp->regs + SYS_CTL_3);
+}
+
+void rk3288_edp_reset_aux(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ /* Disable AUX channel module */
+ val = readl(edp->regs + FUNC_EN_2);
+ val |= AUX_FUNC_EN_N;
+ writel(val, edp->regs + FUNC_EN_2);
+}
+
+void rk3288_edp_init_aux(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ /* Clear inerrupts related to AUX channel */
+ val = RPLY_RECEIV | AUX_ERR;
+ writel(val, edp->regs + DP_INT_STA);
+
+ rk3288_edp_reset_aux(edp);
+
+ /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+ val = DEFER_CTRL_EN | DEFER_COUNT(1);
+ writel(val, edp->regs + AUX_CH_DEFER_CTL);
+
+ /* Enable AUX channel module */
+ val = readl(edp->regs + FUNC_EN_2);
+ val &= ~AUX_FUNC_EN_N;
+ writel(val, edp->regs + FUNC_EN_2);
+}
+
+int rk3288_edp_get_plug_in_status(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + SYS_CTL_3);
+ if (val & HPD_STATUS)
+ return 0;
+
+ return -EINVAL;
+}
+
+void rk3288_edp_enable_sw_function(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + FUNC_EN_1);
+ val &= ~SW_FUNC_EN_N;
+ writel(val, edp->regs + FUNC_EN_1);
+}
+
+int rk3288_edp_start_aux_transaction(struct rk3288_edp *edp)
+{
+ int val;
+ int retval = 0;
+ int timeout_loop = 0;
+ int aux_timeout = 0;
+
+ /* Enable AUX CH operation */
+ val = readl(edp->regs + AUX_CH_CTL_2);
+ val |= AUX_EN;
+ writel(val, edp->regs + AUX_CH_CTL_2);
+
+ /* Is AUX CH operation enabled? */
+ val = readl(edp->regs + AUX_CH_CTL_2);
+ while (val & AUX_EN) {
+ aux_timeout++;
+ if ((DP_TIMEOUT_LOOP_CNT * 10) < aux_timeout) {
+ dev_err(edp->dev, "AUX CH enable timeout!\n");
+ return -ETIMEDOUT;
+ }
+ val = readl(edp->regs + AUX_CH_CTL_2);
+ usleep_range(100, 110);
+ }
+
+ /* Is AUX CH command redply received? */
+ val = readl(edp->regs + DP_INT_STA);
+ while (!(val & RPLY_RECEIV)) {
+ timeout_loop++;
+ if (DP_TIMEOUT_LOOP_CNT < timeout_loop) {
+ dev_err(edp->dev, "AUX CH command redply failed!\n");
+ return -ETIMEDOUT;
+ }
+ val = readl(edp->regs + DP_INT_STA);
+ usleep_range(10, 20);
+ }
+
+ /* Clear interrupt source for AUX CH command redply */
+ writel(RPLY_RECEIV, edp->regs + DP_INT_STA);
+
+ /* Clear interrupt source for AUX CH access error */
+ val = readl(edp->regs + DP_INT_STA);
+ if (val & AUX_ERR) {
+ writel(AUX_ERR, edp->regs + DP_INT_STA);
+ return -EREMOTEIO;
+ }
+
+ /* Check AUX CH error access status */
+ val = readl(edp->regs + AUX_CH_STA);
+ if ((val & AUX_STATUS_MASK) != 0) {
+ dev_err(edp->dev, "AUX CH error happens: %d\n\n",
+ val & AUX_STATUS_MASK);
+ return -EREMOTEIO;
+ }
+
+ return retval;
+}
+
+int rk3288_edp_write_byte_to_dpcd(struct rk3288_edp *edp,
+ unsigned int val_addr,
+ unsigned char data)
+{
+ u32 val;
+ int i;
+ int retval;
+
+ for (i = 0; i < 3; i++) {
+ /* Clear AUX CH data buffer */
+ val = BUF_CLR;
+ writel(val, edp->regs + BUFFER_DATA_CTL);
+
+ /* Select DPCD device address */
+ val = AUX_ADDR_7_0(val_addr);
+ writel(val, edp->regs + DP_AUX_ADDR_7_0);
+ val = AUX_ADDR_15_8(val_addr);
+ writel(val, edp->regs + DP_AUX_ADDR_15_8);
+ val = AUX_ADDR_19_16(val_addr);
+ writel(val, edp->regs + DP_AUX_ADDR_19_16);
+
+ /* Write data buffer */
+ val = (unsigned int)data;
+ writel(val, edp->regs + BUF_DATA_0);
+
+ /*
+ * Set DisplayPort transaction and write 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ val = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+ writel(val, edp->regs + AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = rk3288_edp_start_aux_transaction(edp);
+ if (retval == 0)
+ break;
+ else
+ dev_dbg(edp->dev, "Aux Transaction fail!\n");
+ }
+
+ return retval;
+}
+
+int rk3288_edp_read_byte_from_dpcd(struct rk3288_edp *edp,
+ unsigned int val_addr,
+ unsigned char *data)
+{
+ u32 val;
+ int i;
+ int retval;
+
+ for (i = 0; i < 10; i++) {
+ /* Clear AUX CH data buffer */
+ val = BUF_CLR;
+ writel(val, edp->regs + BUFFER_DATA_CTL);
+
+ /* Select DPCD device address */
+ val = AUX_ADDR_7_0(val_addr);
+ writel(val, edp->regs + DP_AUX_ADDR_7_0);
+ val = AUX_ADDR_15_8(val_addr);
+ writel(val, edp->regs + DP_AUX_ADDR_15_8);
+ val = AUX_ADDR_19_16(val_addr);
+ writel(val, edp->regs + DP_AUX_ADDR_19_16);
+
+ /*
+ * Set DisplayPort transaction and read 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ val = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+ writel(val, edp->regs + AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = rk3288_edp_start_aux_transaction(edp);
+ if (retval == 0)
+ break;
+ else
+ dev_dbg(edp->dev, "Aux Transaction fail!\n");
+ }
+
+ /* Read data buffer */
+ val = readl(edp->regs + BUF_DATA_0);
+ *data = (unsigned char)(val & 0xff);
+
+ return retval;
+}
+
+int rk3288_edp_write_bytes_to_dpcd(struct rk3288_edp *edp,
+ unsigned int val_addr,
+ unsigned int count,
+ unsigned char data[])
+{
+ u32 val;
+ unsigned int start_offset;
+ unsigned int cur_data_count;
+ unsigned int cur_data_idx;
+ int i;
+ int retval = 0;
+
+ /* Clear AUX CH data buffer */
+ val = BUF_CLR;
+ writel(val, edp->regs + BUFFER_DATA_CTL);
+
+ start_offset = 0;
+ while (start_offset < count) {
+ /* Buffer size of AUX CH is 16 * 4bytes */
+ if ((count - start_offset) > 16)
+ cur_data_count = 16;
+ else
+ cur_data_count = count - start_offset;
+
+ for (i = 0; i < 10; i++) {
+ /* Select DPCD device address */
+ val = AUX_ADDR_7_0(val_addr + start_offset);
+ writel(val, edp->regs + DP_AUX_ADDR_7_0);
+ val = AUX_ADDR_15_8(val_addr + start_offset);
+ writel(val, edp->regs + DP_AUX_ADDR_15_8);
+ val = AUX_ADDR_19_16(val_addr + start_offset);
+ writel(val, edp->regs + DP_AUX_ADDR_19_16);
+
+ for (cur_data_idx = 0; cur_data_idx < cur_data_count;
+ cur_data_idx++) {
+ val = data[start_offset + cur_data_idx];
+ writel(val, edp->regs + BUF_DATA_0
+ + 4 * cur_data_idx);
+ }
+
+ /*
+ * Set DisplayPort transaction and write
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ val = AUX_LENGTH(cur_data_count) |
+ AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+ writel(val, edp->regs + AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = rk3288_edp_start_aux_transaction(edp);
+ if (retval == 0)
+ break;
+ else
+ dev_dbg(edp->dev, "Aux Transaction fail!\n");
+ }
+
+ start_offset += cur_data_count;
+ }
+
+ return retval;
+}
+
+int rk3288_edp_read_bytes_from_dpcd(struct rk3288_edp *edp,
+ unsigned int val_addr,
+ unsigned int count,
+ unsigned char data[])
+{
+ u32 val;
+ unsigned int start_offset;
+ unsigned int cur_data_count;
+ unsigned int cur_data_idx;
+ int i;
+ int retval = 0;
+
+ /* Clear AUX CH data buffer */
+ val = BUF_CLR;
+ writel(val, edp->regs + BUFFER_DATA_CTL);
+
+ start_offset = 0;
+ while (start_offset < count) {
+ /* Buffer size of AUX CH is 16 * 4bytes */
+ if ((count - start_offset) > 16)
+ cur_data_count = 16;
+ else
+ cur_data_count = count - start_offset;
+
+ /* AUX CH Request Transaction process */
+ for (i = 0; i < 10; i++) {
+ /* Select DPCD device address */
+ val = AUX_ADDR_7_0(val_addr + start_offset);
+ writel(val, edp->regs + DP_AUX_ADDR_7_0);
+ val = AUX_ADDR_15_8(val_addr + start_offset);
+ writel(val, edp->regs + DP_AUX_ADDR_15_8);
+ val = AUX_ADDR_19_16(val_addr + start_offset);
+ writel(val, edp->regs + DP_AUX_ADDR_19_16);
+
+ /*
+ * Set DisplayPort transaction and read
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ val = AUX_LENGTH(cur_data_count) |
+ AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+ writel(val, edp->regs + AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = rk3288_edp_start_aux_transaction(edp);
+ if (retval == 0)
+ break;
+ else
+ dev_dbg(edp->dev, "Aux Transaction fail!\n");
+ }
+
+ for (cur_data_idx = 0; cur_data_idx < cur_data_count;
+ cur_data_idx++) {
+ val = readl(edp->regs + BUF_DATA_0
+ + 4 * cur_data_idx);
+ data[start_offset + cur_data_idx] =
+ (unsigned char)val;
+ }
+
+ start_offset += cur_data_count;
+ }
+
+ return retval;
+}
+
+int rk3288_edp_select_i2c_device(struct rk3288_edp *edp,
+ unsigned int device_addr,
+ unsigned int val_addr)
+{
+ u32 val;
+ int retval;
+
+ /* Set EDID device address */
+ val = device_addr;
+ writel(val, edp->regs + DP_AUX_ADDR_7_0);
+ writel(0x0, edp->regs + DP_AUX_ADDR_15_8);
+ writel(0x0, edp->regs + DP_AUX_ADDR_19_16);
+
+ /* Set offset from base address of EDID device */
+ writel(val_addr, edp->regs + BUF_DATA_0);
+
+ /*
+ * Set I2C transaction and write address
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ val = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
+ AUX_TX_COMM_WRITE;
+ writel(val, edp->regs + AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = rk3288_edp_start_aux_transaction(edp);
+ if (retval != 0)
+ dev_dbg(edp->dev, "Aux Transaction fail!\n");
+
+ return retval;
+}
+
+int rk3288_edp_read_byte_from_i2c(struct rk3288_edp *edp,
+ unsigned int device_addr,
+ unsigned int val_addr,
+ unsigned int *data)
+{
+ u32 val;
+ int i;
+ int retval;
+
+ for (i = 0; i < 10; i++) {
+ /* Clear AUX CH data buffer */
+ val = BUF_CLR;
+ writel(val, edp->regs + BUFFER_DATA_CTL);
+
+ /* Select EDID device */
+ retval = rk3288_edp_select_i2c_device(edp,
+ device_addr,
+ val_addr);
+ if (retval != 0) {
+ dev_err(edp->dev, "Select EDID device fail!\n");
+ continue;
+ }
+
+ /*
+ * Set I2C transaction and read data
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ val = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_READ;
+ writel(val, edp->regs + AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = rk3288_edp_start_aux_transaction(edp);
+ if (retval == 0)
+ break;
+ else
+ dev_dbg(edp->dev, "Aux Transaction fail!\n");
+ }
+
+ /* Read data */
+ if (retval == 0)
+ *data = readl(edp->regs + BUF_DATA_0);
+
+ return retval;
+}
+
+int rk3288_edp_read_bytes_from_i2c(struct rk3288_edp *edp,
+ unsigned int device_addr,
+ unsigned int val_addr,
+ unsigned int count,
+ unsigned char edid[])
+{
+ u32 val;
+ unsigned int i, j;
+ unsigned int cur_data_idx;
+ unsigned int defer = 0;
+ int retval = 0;
+
+ for (i = 0; i < count; i += 16) {
+ for (j = 0; j < 100; j++) {
+ /* Clear AUX CH data buffer */
+ val = BUF_CLR;
+ writel(val, edp->regs + BUFFER_DATA_CTL);
+
+ /* Set normal AUX CH command */
+ val = readl(edp->regs + AUX_CH_CTL_2);
+ val &= ~ADDR_ONLY;
+ writel(val, edp->regs + AUX_CH_CTL_2);
+
+ /*
+ * If Rx sends defer, Tx sends only reads
+ * request without sending addres
+ */
+ if (!defer)
+ retval = rk3288_edp_select_i2c_device(
+ edp, device_addr, val_addr + i);
+ else
+ defer = 0;
+
+ /*
+ * Set I2C transaction and write data
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ val = AUX_LENGTH(16) | AUX_TX_COMM_I2C_TRANSACTION |
+ AUX_TX_COMM_READ;
+ writel(val, edp->regs + AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = rk3288_edp_start_aux_transaction(edp);
+ if (retval == 0)
+ break;
+ else
+ dev_dbg(edp->dev, "Aux Transaction fail!\n");
+
+ /* Check if Rx sends defer */
+ val = readl(edp->regs + AUX_RX_COMM);
+ if (val == AUX_RX_COMM_AUX_DEFER ||
+ val == AUX_RX_COMM_I2C_DEFER) {
+ dev_err(edp->dev, "Defer: %d\n\n", val);
+ defer = 1;
+ }
+ }
+
+ for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
+ val = readl(edp->regs + BUF_DATA_0 + 4 * cur_data_idx);
+ edid[i + cur_data_idx] = (unsigned char)val;
+ }
+ }
+
+ return retval;
+}
+
+void rk3288_edp_set_link_bandwidth(struct rk3288_edp *edp, u32 bwtype)
+{
+ u32 val;
+
+ val = bwtype;
+ if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS))
+ writel(val, edp->regs + LINK_BW_SET);
+}
+
+void rk3288_edp_get_link_bandwidth(struct rk3288_edp *edp, u32 *bwtype)
+{
+ u32 val;
+
+ val = readl(edp->regs + LINK_BW_SET);
+ *bwtype = val;
+}
+
+void rk3288_edp_hw_link_training_en(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = HW_LT_EN;
+ writel(val, edp->regs + HW_LT_CTL);
+}
+
+int rk3288_edp_wait_hw_lt_done(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + DP_INT_STA);
+ if (val&HW_LT_DONE) {
+ writel(val, edp->regs + DP_INT_STA);
+ return 0;
+ } else {
+ return 1;
+ }
+}
+
+int rk3288_edp_get_hw_lt_status(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + HW_LT_CTL);
+ return (val & HW_LT_ERR_CODE_MASK) >> 4;
+}
+void rk3288_edp_set_lane_count(struct rk3288_edp *edp, u32 count)
+{
+ u32 val;
+
+ val = count;
+ writel(val, edp->regs + LANE_CNT_SET);
+}
+
+void rk3288_edp_get_lane_count(struct rk3288_edp *edp, u32 *count)
+{
+ u32 val;
+
+ val = readl(edp->regs + LANE_CNT_SET);
+ *count = val;
+}
+
+void rk3288_edp_enable_enhanced_mode(struct rk3288_edp *edp, bool enable)
+{
+ u32 val;
+
+ if (enable) {
+ val = readl(edp->regs + SYS_CTL_4);
+ val |= ENHANCED;
+ writel(val, edp->regs + SYS_CTL_4);
+ } else {
+ val = readl(edp->regs + SYS_CTL_4);
+ val &= ~ENHANCED;
+ writel(val, edp->regs + SYS_CTL_4);
+ }
+}
+
+void rk3288_edp_set_training_pattern(struct rk3288_edp *edp,
+ enum pattern_set pattern)
+{
+ u32 val;
+
+ switch (pattern) {
+ case PRBS7:
+ val = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
+ writel(val, edp->regs + TRAINING_PTN_SET);
+ break;
+ case D10_2:
+ val = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
+ writel(val, edp->regs + TRAINING_PTN_SET);
+ break;
+ case TRAINING_PTN1:
+ val = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
+ writel(val, edp->regs + TRAINING_PTN_SET);
+ break;
+ case TRAINING_PTN2:
+ val = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
+ writel(val, edp->regs + TRAINING_PTN_SET);
+ break;
+ case DP_NONE:
+ val = SCRAMBLING_ENABLE |
+ LINK_QUAL_PATTERN_SET_DISABLE |
+ SW_TRAINING_PATTERN_SET_DISABLE;
+ writel(val, edp->regs + TRAINING_PTN_SET);
+ break;
+ default:
+ break;
+ }
+}
+
+void rk3288_edp_set_lane0_pre_emphasis(struct rk3288_edp *edp, u32 level)
+{
+ u32 val;
+
+ val = level << PRE_EMPHASIS_SET_SHIFT;
+ writel(val, edp->regs + LN0_LINK_TRAINING_CTL);
+}
+
+void rk3288_edp_set_lane1_pre_emphasis(struct rk3288_edp *edp, u32 level)
+{
+ u32 val;
+
+ val = level << PRE_EMPHASIS_SET_SHIFT;
+ writel(val, edp->regs + LN1_LINK_TRAINING_CTL);
+}
+
+void rk3288_edp_set_lane2_pre_emphasis(struct rk3288_edp *edp, u32 level)
+{
+ u32 val;
+
+ val = level << PRE_EMPHASIS_SET_SHIFT;
+ writel(val, edp->regs + LN2_LINK_TRAINING_CTL);
+}
+
+void rk3288_edp_set_lane3_pre_emphasis(struct rk3288_edp *edp, u32 level)
+{
+ u32 val;
+
+ val = level << PRE_EMPHASIS_SET_SHIFT;
+ writel(val, edp->regs + LN3_LINK_TRAINING_CTL);
+}
+
+void rk3288_edp_set_lane0_link_training(struct rk3288_edp *edp,
+ u32 training_lane)
+{
+ u32 val;
+
+ val = training_lane;
+ writel(val, edp->regs + LN0_LINK_TRAINING_CTL);
+}
+
+void rk3288_edp_set_lane1_link_training(struct rk3288_edp *edp,
+ u32 training_lane)
+{
+ u32 val;
+
+ val = training_lane;
+ writel(val, edp->regs + LN1_LINK_TRAINING_CTL);
+}
+
+void rk3288_edp_set_lane2_link_training(struct rk3288_edp *edp,
+ u32 training_lane)
+{
+ u32 val;
+
+ val = training_lane;
+ writel(val, edp->regs + LN2_LINK_TRAINING_CTL);
+}
+
+void rk3288_edp_set_lane3_link_training(struct rk3288_edp *edp,
+ u32 training_lane)
+{
+ u32 val;
+
+ val = training_lane;
+ writel(val, edp->regs + LN3_LINK_TRAINING_CTL);
+}
+
+u32 rk3288_edp_get_lane0_link_training(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + LN0_LINK_TRAINING_CTL);
+ return val;
+}
+
+u32 rk3288_edp_get_lane1_link_training(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + LN1_LINK_TRAINING_CTL);
+ return val;
+}
+
+u32 rk3288_edp_get_lane2_link_training(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + LN2_LINK_TRAINING_CTL);
+ return val;
+}
+
+u32 rk3288_edp_get_lane3_link_training(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + LN3_LINK_TRAINING_CTL);
+ return val;
+}
+
+void rk3288_edp_reset_macro(struct rk3288_edp *edp)
+{
+}
+
+int rk3288_edp_init_video(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
+ writel(val, edp->regs + COMMON_INT_STA_1);
+
+ val = 0x0;
+ writel(val, edp->regs + SYS_CTL_1);
+
+ val = CHA_CRI(4) | CHA_CTRL;
+ writel(val, edp->regs + SYS_CTL_2);
+
+ val = VID_HRES_TH(2) | VID_VRES_TH(0);
+ writel(val, edp->regs + VIDEO_CTL_8);
+
+ return 0;
+}
+
+void rk3288_edp_set_video_color_format(struct rk3288_edp *edp,
+ u32 color_dedpth,
+ u32 color_space,
+ u32 dynamic_range,
+ u32 coeff)
+{
+ u32 val;
+
+ /* Configure the input color dedpth, color space, dynamic range */
+ val = (dynamic_range << IN_D_RANGE_SHIFT) |
+ (color_dedpth << IN_BPC_SHIFT) |
+ (color_space << IN_COLOR_F_SHIFT);
+ writel(val, edp->regs + VIDEO_CTL_2);
+
+ /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
+ val = readl(edp->regs + VIDEO_CTL_3);
+ val &= ~IN_YC_COEFFI_MASK;
+ if (coeff)
+ val |= IN_YC_COEFFI_ITU709;
+ else
+ val |= IN_YC_COEFFI_ITU601;
+ writel(val, edp->regs + VIDEO_CTL_3);
+}
+
+int rk3288_edp_is_slave_video_stream_clock_on(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + SYS_CTL_1);
+ writel(val, edp->regs + SYS_CTL_1);
+
+ val = readl(edp->regs + SYS_CTL_1);
+
+ if (!(val & DET_STA)) {
+ dev_dbg(edp->dev, "Input stream clock not detected.\n");
+ return -EINVAL;
+ }
+
+ val = readl(edp->regs + SYS_CTL_2);
+ writel(val, edp->regs + SYS_CTL_2);
+
+ val = readl(edp->regs + SYS_CTL_2);
+ if (val & CHA_STA) {
+ dev_dbg(edp->dev, "Input stream clk is changing\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void rk3288_edp_set_video_cr_mn(struct rk3288_edp *edp,
+ enum clock_recovery_m_value_type type,
+ u32 m_value,
+ u32 n_value)
+{
+ u32 val;
+
+ if (type == REGISTER_M) {
+ val = readl(edp->regs + SYS_CTL_4);
+ val |= FIX_M_VID;
+ writel(val, edp->regs + SYS_CTL_4);
+ val = m_value & 0xff;
+ writel(val, edp->regs + M_VID_0);
+ val = (m_value >> 8) & 0xff;
+ writel(val, edp->regs + M_VID_1);
+ val = (m_value >> 16) & 0xff;
+ writel(val, edp->regs + M_VID_2);
+
+ val = n_value & 0xff;
+ writel(val, edp->regs + N_VID_0);
+ val = (n_value >> 8) & 0xff;
+ writel(val, edp->regs + N_VID_1);
+ val = (n_value >> 16) & 0xff;
+ writel(val, edp->regs + N_VID_2);
+ } else {
+ val = readl(edp->regs + SYS_CTL_4);
+ val &= ~FIX_M_VID;
+ writel(val, edp->regs + SYS_CTL_4);
+
+ writel(0x00, edp->regs + N_VID_0);
+ writel(0x80, edp->regs + N_VID_1);
+ writel(0x00, edp->regs + N_VID_2);
+ }
+}
+
+void rk3288_edp_set_video_timing_mode(struct rk3288_edp *edp, u32 type)
+{
+ u32 val;
+
+ if (type == VIDEO_TIMING_FROM_CAPTURE) {
+ val = readl(edp->regs + VIDEO_CTL_10);
+ val &= ~F_SEL;
+ writel(val, edp->regs + VIDEO_CTL_10);
+ } else {
+ val = readl(edp->regs + VIDEO_CTL_10);
+ val |= F_SEL;
+ writel(val, edp->regs + VIDEO_CTL_10);
+ }
+}
+
+int rk3288_edp_bist_cfg(struct rk3288_edp *edp)
+{
+ struct video_info *video_info = &edp->video_info;
+ struct drm_display_mode *mode = &edp->mode;
+ u16 x_total, y_total, x_act;
+ u32 val;
+
+ x_total = mode->htotal;
+ y_total = mode->vtotal;
+ x_act = mode->hdisplay;
+
+ rk3288_edp_set_video_cr_mn(edp, CALCULATED_M, 0, 0);
+ rk3288_edp_set_video_color_format(edp, video_info->color_depth,
+ video_info->color_space,
+ video_info->dynamic_range,
+ video_info->ycbcr_coeff);
+
+ val = y_total & 0xff;
+ writel(val, edp->regs + TOTAL_LINE_CFG_L);
+ val = (y_total >> 8);
+ writel(val, edp->regs + TOTAL_LINE_CFG_H);
+ val = (mode->vdisplay & 0xff);
+ writel(val, edp->regs + ATV_LINE_CFG_L);
+ val = (mode->vdisplay >> 8);
+ writel(val, edp->regs + ATV_LINE_CFG_H);
+ val = (mode->vsync_start - mode->vdisplay);
+ writel(val, edp->regs + VF_PORCH_REG);
+ val = (mode->vsync_end - mode->vsync_start);
+ writel(val, edp->regs + VSYNC_CFG_REG);
+ val = (mode->vtotal - mode->vsync_end);
+ writel(val, edp->regs + VB_PORCH_REG);
+ val = x_total & 0xff;
+ writel(val, edp->regs + TOTAL_PIXELL_REG);
+ val = x_total >> 8;
+ writel(val, edp->regs + TOTAL_PIXELH_REG);
+ val = (x_act & 0xff);
+ writel(val, edp->regs + ATV_PIXELL_REG);
+ val = (x_act >> 8);
+ writel(val, edp->regs + ATV_PIXELH_REG);
+ val = (mode->hsync_start - mode->hdisplay) & 0xff;
+ writel(val, edp->regs + HF_PORCHL_REG);
+ val = (mode->hsync_start - mode->hdisplay) >> 8;
+ writel(val, edp->regs + HF_PORCHH_REG);
+ val = (mode->hsync_end - mode->hsync_start) & 0xff;
+ writel(val, edp->regs + HSYNC_CFGL_REG);
+ val = (mode->hsync_end - mode->hsync_start) >> 8;
+ writel(val, edp->regs + HSYNC_CFGH_REG);
+ val = (mode->htotal - mode->hsync_end) & 0xff;
+ writel(val, edp->regs + HB_PORCHL_REG);
+ val = (mode->htotal - mode->hsync_end) >> 8;
+ writel(val, edp->regs + HB_PORCHH_REG);
+
+ val = BIST_EN | BIST_WH_64 | BIST_TYPE_COLR_BAR;
+ writel(val, edp->regs + VIDEO_CTL_4);
+
+ val = readl(edp->regs + VIDEO_CTL_10);
+ val &= ~F_SEL;
+ writel(val, edp->regs + VIDEO_CTL_10);
+ return 0;
+}
+
+void rk3288_edp_enable_video_master(struct rk3288_edp *edp, bool enable)
+{
+}
+
+void rk3288_edp_start_video(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + VIDEO_CTL_1);
+ val |= VIDEO_EN;
+ writel(val, edp->regs + VIDEO_CTL_1);
+}
+
+int rk3288_edp_is_video_stream_on(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + SYS_CTL_3);
+ writel(val, edp->regs + SYS_CTL_3);
+
+ val = readl(edp->regs + SYS_CTL_3);
+ if (!(val & STRM_VALID)) {
+ dev_dbg(edp->dev, "Input video stream is not detected.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void rk3288_edp_config_video_slave_mode(struct rk3288_edp *edp,
+ struct video_info *video_info)
+{
+ u32 val;
+
+ val = readl(edp->regs + FUNC_EN_1);
+ val &= ~(VID_FIFO_FUNC_EN_N | VID_CAP_FUNC_EN_N);
+ writel(val, edp->regs + FUNC_EN_1);
+
+ val = readl(edp->regs + VIDEO_CTL_10);
+ val &= ~INTERACE_SCAN_CFG;
+ val |= (video_info->interlaced << 2);
+ writel(val, edp->regs + VIDEO_CTL_10);
+
+ val = readl(edp->regs + VIDEO_CTL_10);
+ val &= ~VSYNC_POLARITY_CFG;
+ val |= (video_info->v_sync_polarity << 1);
+ writel(val, edp->regs + VIDEO_CTL_10);
+
+ val = readl(edp->regs + VIDEO_CTL_10);
+ val &= ~HSYNC_POLARITY_CFG;
+ val |= (video_info->h_sync_polarity << 0);
+ writel(val, edp->regs + VIDEO_CTL_10);
+}
+
+void rk3288_edp_enable_scrambling(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + TRAINING_PTN_SET);
+ val &= ~SCRAMBLING_DISABLE;
+ writel(val, edp->regs + TRAINING_PTN_SET);
+}
+
+void rk3288_edp_disable_scrambling(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = readl(edp->regs + TRAINING_PTN_SET);
+ val |= SCRAMBLING_DISABLE;
+ writel(val, edp->regs + TRAINING_PTN_SET);
+}
+
+enum dp_irq_type rk3288_edp_get_irq_type(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ /* Parse hotplug interrupt status register */
+ val = readl(edp->regs + COMMON_INT_STA_4);
+ if (val & PLUG)
+ return DP_IRQ_TYPE_HP_CABLE_IN;
+
+ if (val & HPD_LOST)
+ return DP_IRQ_TYPE_HP_CABLE_OUT;
+
+ if (val & HOTPLUG_CHG)
+ return DP_IRQ_TYPE_HP_CHANGE;
+
+ return DP_IRQ_TYPE_UNKNOWN;
+}
+
+void rk3288_edp_clear_hotplug_interrupts(struct rk3288_edp *edp)
+{
+ u32 val;
+
+ val = HOTPLUG_CHG | HPD_LOST | PLUG;
+ writel(val, edp->regs + COMMON_INT_STA_4);
+
+ val = INT_HPD;
+ writel(val, edp->regs + DP_INT_STA);
+}
diff --git a/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h b/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h
new file mode 100644
index 0000000..baf8d90
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h
@@ -0,0 +1,378 @@
+/*
+* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+* Author:
+* yxj <yxj@xxxxxxxxxxxxxx>
+* cym <cym@xxxxxxxxxxxxxx>
+*
+* based on exynos_dp_reg.h
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+#ifndef _RK32XX_DP_REG_H
+#define _RK32XX_DP_REG_H
+
+#define DP_VERSION 0x10
+
+#define TX_SW_RST 0x14
+
+#define FUNC_EN_1 0x18
+#define VID_CAP_FUNC_EN_N BIT(6)
+#define VID_FIFO_FUNC_EN_N BIT(5)
+#define AUD_FIFO_FUNC_EN_N BIT(4)
+#define AUD_FUNC_EN_N BIT(3)
+#define HDCP_FUNC_EN_N BIT(2)
+#define SW_FUNC_EN_N BIT(0)
+
+#define FUNC_EN_2 0x1C
+#define SSC_FUNC_EN_N BIT(7)
+#define AUX_FUNC_EN_N BIT(2)
+#define SERDES_FIFO_FUNC_EN_N BIT(1)
+#define LS_CLK_DOMAIN_FUNC_EN_N BIT(0)
+
+#define VIDEO_CTL_1 0x20
+#define VIDEO_EN BIT(7)
+#define VIDEO_MUTE BIT(6)
+
+#define VIDEO_CTL_2 0x24
+#define IN_D_RANGE_MASK (0x1 << 7)
+#define IN_D_RANGE_SHIFT (7)
+#define IN_D_RANGE_CEA (0x1 << 7)
+#define IN_D_RANGE_VESA (0x0 << 7)
+#define IN_BPC_MASK (0x7 << 4)
+#define IN_BPC_SHIFT (4)
+#define IN_BPC_12_BITS (0x3 << 4)
+#define IN_BPC_10_BITS (0x2 << 4)
+#define IN_BPC_8_BITS (0x1 << 4)
+#define IN_BPC_6_BITS (0x0 << 4)
+#define IN_COLOR_F_MASK (0x3 << 0)
+#define IN_COLOR_F_SHIFT (0)
+#define IN_COLOR_F_YCBCR444 (0x2 << 0)
+#define IN_COLOR_F_YCBCR422 (0x1 << 0)
+#define IN_COLOR_F_RGB (0x0 << 0)
+
+#define VIDEO_CTL_3 0x28
+#define IN_YC_COEFFI_MASK (0x1 << 7)
+#define IN_YC_COEFFI_SHIFT (7)
+#define IN_YC_COEFFI_ITU709 (0x1 << 7)
+#define IN_YC_COEFFI_ITU601 (0x0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT (4)
+#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
+
+#define VIDEO_CTL_4 0x2c
+#define BIST_EN (0x1 << 3)
+#define BIST_WH_64 (0x1 << 2)
+#define BIST_WH_32 (0x0 << 2)
+#define BIST_TYPE_COLR_BAR (0x0 << 0)
+#define BIST_TYPE_GRAY_BAR (0x1 << 0)
+#define BIST_TYPE_MOBILE_BAR (0x2 << 0)
+
+#define VIDEO_CTL_8 0x3C
+#define VID_HRES_TH(x) (((x) & 0xf) << 4)
+#define VID_VRES_TH(x) (((x) & 0xf) << 0)
+
+#define VIDEO_CTL_10 0x44
+#define F_SEL (0x1 << 4)
+#define INTERACE_SCAN_CFG (0x1 << 2)
+#define VSYNC_POLARITY_CFG (0x1 << 1)
+#define HSYNC_POLARITY_CFG (0x1 << 0)
+
+#define TOTAL_LINE_CFG_L 0x48
+#define TOTAL_LINE_CFG_H 0x4c
+#define ATV_LINE_CFG_L 0x50
+#define ATV_LINE_CFG_H 0x54
+#define VF_PORCH_REG 0x58
+#define VSYNC_CFG_REG 0x5c
+#define VB_PORCH_REG 0x60
+#define TOTAL_PIXELL_REG 0x64
+#define TOTAL_PIXELH_REG 0x68
+#define ATV_PIXELL_REG 0x6c
+#define ATV_PIXELH_REG 0x70
+#define HF_PORCHL_REG 0x74
+#define HF_PORCHH_REG 0x78
+#define HSYNC_CFGL_REG 0x7c
+#define HSYNC_CFGH_REG 0x80
+#define HB_PORCHL_REG 0x84
+#define HB_PORCHH_REG 0x88
+
+
+#define SSC_REG 0x104
+#define TX_REG_COMMON 0x114
+#define DP_AUX 0x120
+#define DP_BIAS 0x124
+
+#define PLL_REG_1 0xfc
+#define REF_CLK_24M (0x1 << 1)
+#define REF_CLK_27M (0x0 << 1)
+
+#define PLL_REG_2 0x9e4
+#define PLL_REG_3 0x9e8
+#define PLL_REG_4 0x9ec
+#define PLL_REG_5 0xa00
+#define DP_PWRDN 0x12c
+#define PD_INC_BG BIT(7)
+#define PD_EXP_BG BIT(6)
+#define PD_AUX BIT(5)
+#define PD_PLL BIT(4)
+#define PD_CH3 BIT(3)
+#define PD_CH2 BIT(2)
+#define PD_CH1 BIT(1)
+#define PD_CH0 BIT(0)
+
+#define DP_RESERVE2 0x134
+
+#define LANE_MAP 0x35C
+#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
+#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
+#define LANE3_MAP_LOGIC_LANE_2 (0x2 << 6)
+#define LANE3_MAP_LOGIC_LANE_3 (0x3 << 6)
+#define LANE2_MAP_LOGIC_LANE_0 (0x0 << 4)
+#define LANE2_MAP_LOGIC_LANE_1 (0x1 << 4)
+#define LANE2_MAP_LOGIC_LANE_2 (0x2 << 4)
+#define LANE2_MAP_LOGIC_LANE_3 (0x3 << 4)
+#define LANE1_MAP_LOGIC_LANE_0 (0x0 << 2)
+#define LANE1_MAP_LOGIC_LANE_1 (0x1 << 2)
+#define LANE1_MAP_LOGIC_LANE_2 (0x2 << 2)
+#define LANE1_MAP_LOGIC_LANE_3 (0x3 << 2)
+#define LANE0_MAP_LOGIC_LANE_0 (0x0 << 0)
+#define LANE0_MAP_LOGIC_LANE_1 (0x1 << 0)
+#define LANE0_MAP_LOGIC_LANE_2 (0x2 << 0)
+#define LANE0_MAP_LOGIC_LANE_3 (0x3 << 0)
+
+#define ANALOG_CTL_2 0x374
+#define SEL_24M (0x1 << 3)
+
+#define AUX_HW_RETRY_CTL 0x390
+
+#define INT_STA 0x3c0
+
+#define COMMON_INT_STA_1 0x3C4
+#define VSYNC_DET BIT(7)
+#define PLL_LOCK_CHG BIT(6)
+#define SPDIF_ERR BIT(5)
+#define SPDIF_UNSTBL BIT(4)
+#define VID_FORMAT_CHG BIT(3)
+#define AUD_CLK_CHG BIT(2)
+#define VID_CLK_CHG BIT(1)
+#define SW_INT BIT(0)
+
+#define COMMON_INT_STA_2 0x3C8
+#define ENC_EN_CHG BIT(6)
+#define HW_BKSV_RDY BIT(3)
+#define HW_SHA_DONE BIT(2)
+#define HW_AUTH_STATE_CHG BIT(1)
+#define HW_AUTH_DONE BIT(0)
+
+#define COMMON_INT_STA_3 0x3CC
+#define AFIFO_UNDER BIT(7)
+#define AFIFO_OVER BIT(6)
+#define R0_CHK_FLAG BIT(5)
+
+#define COMMON_INT_STA_4 0x3D0
+#define PSR_ACTIVE BIT(7)
+#define PSR_INACTIVE BIT(6)
+#define SPDIF_BI_PHASE_ERR BIT(5)
+#define HOTPLUG_CHG BIT(2)
+#define HPD_LOST BIT(1)
+#define PLUG BIT(0)
+
+#define DP_INT_STA 0x3DC
+#define INT_HPD BIT(6)
+#define HW_LT_DONE BIT(5)
+#define SINK_LOST BIT(3)
+#define LINK_LOST BIT(2)
+#define RPLY_RECEIV BIT(1)
+#define AUX_ERR BIT(0)
+
+#define COMMON_INT_MASK_1 0x3E0
+#define COMMON_INT_MASK_2 0x3E4
+#define COMMON_INT_MASK_3 0x3E8
+#define COMMON_INT_MASK_4 0x3EC
+#define DP_INT_STA_MASK 0x3F8
+
+#define INT_CTL 0x3FC
+#define SOFT_INT_CTRL BIT(2)
+#define INT_POL BIT(0)
+
+#define SYS_CTL_1 0x600
+#define DET_STA BIT(2)
+#define FORCE_DET BIT(1)
+#define DET_CTRL BIT(0)
+
+#define SYS_CTL_2 0x604
+#define CHA_CRI(x) (((x) & 0xf) << 4)
+#define CHA_STA BIT(2)
+#define FORCE_CHA BIT(1)
+#define CHA_CTRL BIT(0)
+
+#define SYS_CTL_3 0x608
+#define HPD_STATUS BIT(6)
+#define F_HPD BIT(5)
+#define HPD_CTRL BIT(4)
+#define HDCP_RDY BIT(3)
+#define STRM_VALID BIT(2)
+#define F_VALID BIT(1)
+#define VALID_CTRL BIT(0)
+
+#define SYS_CTL_4 0x60C
+#define FIX_M_AUD BIT(4)
+#define ENHANCED BIT(3)
+#define FIX_M_VID BIT(2)
+#define M_VID_UPDATE_CTRL BIT(0)
+
+#define PKT_SEND_CTL 0x640
+#define HDCP_CTL 0x648
+
+#define LINK_BW_SET 0x680
+#define LANE_CNT_SET 0x684
+
+#define TRAINING_PTN_SET 0x688
+#define SCRAMBLING_DISABLE (0x1 << 5)
+#define SCRAMBLING_ENABLE (0x0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK (0x7 << 2)
+#define LINK_QUAL_PATTERN_SET_HBR2 (0x5 << 2)
+#define LINK_QUAL_PATTERN_SET_80BIT (0x4 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0)
+#define SW_TRAINING_PATTERN_SET_DISABLE (0x0 << 0)
+
+#define LN0_LINK_TRAINING_CTL 0x68C
+#define LN1_LINK_TRAINING_CTL 0x690
+#define LN2_LINK_TRAINING_CTL 0x694
+#define LN3_LINK_TRAINING_CTL 0x698
+
+#define HW_LT_CTL 0x6a0
+#define HW_LT_ERR_CODE_MASK 0x70
+#define HW_LT_EN BIT(0)
+
+#define DEBUG_CTL 0x6C0
+#define PLL_LOCK BIT(4)
+#define F_PLL_LOCK BIT(3)
+#define PLL_LOCK_CTRL BIT(2)
+#define POLL_EN BIT(1)
+#define PN_INV BIT(0)
+
+#define HPD_DEGLITCH_L 0x6C4
+#define HPD_DEGLITCH_H 0x6C8
+#define LINK_DEBUG_CTL 0x6E0
+
+#define M_VID_0 0x700
+#define M_VID_1 0x704
+#define M_VID_2 0x708
+#define N_VID_0 0x70C
+#define N_VID_1 0x710
+#define N_VID_2 0x714
+
+#define VIDEO_FIFO_THRD 0x730
+#define AUDIO_MARGIN 0x73C
+
+#define M_VID_GEN_FILTER_TH 0x764
+#define M_AUD_GEN_FILTER_TH 0x778
+
+#define AUX_CH_STA 0x780
+#define AUX_BUSY (0x1 << 4)
+#define AUX_STATUS_MASK (0xf << 0)
+
+#define AUX_CH_DEFER_CTL 0x788
+#define DEFER_CTRL_EN (0x1 << 7)
+#define DEFER_COUNT(x) (((x) & 0x7f) << 0)
+
+#define AUX_RX_COMM_I2C_DEFER (0x2 << 2)
+#define AUX_RX_COMM_AUX_DEFER (0x2 << 0)
+
+#define AUX_RX_COMM 0x78C
+#define BUFFER_DATA_CTL 0x790
+#define BUF_CLR (0x1 << 7)
+#define BUF_HAVE_DATA (0x1 << 4)
+#define BUF_DATA_COUNT(x) (((x) & 0xf) << 0)
+
+#define AUX_CH_CTL_1 0x794
+#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4)
+#define AUX_TX_COMM_MASK (0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3)
+#define AUX_TX_COMM_MOT (0x1 << 2)
+#define AUX_TX_COMM_WRITE (0x0 << 0)
+#define AUX_TX_COMM_READ (0x1 << 0)
+
+#define DP_AUX_ADDR_7_0 0x798
+#define DP_AUX_ADDR_15_8 0x79C
+#define DP_AUX_ADDR_19_16 0x7A0
+
+#define AUX_CH_CTL_2 0x7A4
+#define PD_AUX_IDLE BIT(3)
+#define ADDR_ONLY BIT(1)
+#define AUX_EN BIT(0)
+
+#define BUF_DATA_0 0x7C0
+
+#define SOC_GENERAL_CTL 0x800
+
+/* TX_SW_RESET */
+#define RST_DP_TX BIT(0)
+
+/* ANALOG_CTL_1 */
+#define TX_TERMINAL_CTRL_50_OHM BIT(4)
+
+/* ANALOG_CTL_3 */
+#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5)
+#define VCO_BIT_600_MICRO (0x5 << 0)
+
+/* PLL_FILTER_CTL_1 */
+#define PD_RING_OSC (0x1 << 6)
+#define AUX_TERMINAL_CTRL_37_5_OHM (0x0 << 4)
+#define AUX_TERMINAL_CTRL_45_OHM (0x1 << 4)
+#define AUX_TERMINAL_CTRL_50_OHM (0x2 << 4)
+#define AUX_TERMINAL_CTRL_65_OHM (0x3 << 4)
+#define TX_CUR1_2X (0x1 << 2)
+#define TX_CUR_16_MA (0x3 << 0)
+
+/* TX_AMP_TUNING_CTL */
+#define CH3_AMP_SHIFT (24)
+#define CH3_AMP_400_MV (0x0 << 24)
+#define CH2_AMP_SHIFT (16)
+#define CH2_AMP_400_MV (0x0 << 16)
+#define CH1_AMP_SHIFT (8)
+#define CH1_AMP_400_MV (0x0 << 8)
+#define CH0_AMP_SHIFT (0)
+#define CH0_AMP_400_MV (0x0 << 0)
+
+/* AUX_HW_RETRY_CTL */
+#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8)
+#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3)
+#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3)
+#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3)
+#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3)
+#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3)
+#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0)
+
+/* LN0_LINK_TRAINING_CTL */
+#define PRE_EMPHASIS_SET_MASK (0x3 << 3)
+#define PRE_EMPHASIS_SET_SHIFT (3)
+
+/* PLL_CTL */
+#define DP_PLL_PD (0x1 << 7)
+#define DP_PLL_RESET (0x1 << 6)
+#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4)
+#define DP_PLL_REF_BIT_1_1250V (0x5 << 0)
+#define DP_PLL_REF_BIT_1_2500V (0x7 << 0)
+
+/* PHY_TEST */
+#define MACRO_RST BIT(5)
+#define CH1_TEST BIT(1)
+#define CH0_TEST BIT(0)
+
+#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff)
+#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff)
+#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f)
+
+#endif
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
index 59187aa..4f1205f 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -564,6 +564,12 @@ static int rockchip_drm_init(void)
goto out_lvds;
#endif
+#ifdef CONFIG_RK3288_DP
+ ret = platform_driver_register(&rk3288_edp_driver);
+ if (ret)
+ goto out_edp;
+#endif
+
rockchip_drm_pdev = platform_device_register_simple("rockchip-drm", -1,
NULL, 0);
if (IS_ERR(rockchip_drm_pdev)) {
@@ -580,6 +586,10 @@ static int rockchip_drm_init(void)
out_drm_driver:
platform_device_unregister(rockchip_drm_pdev);
out_drm_pdev:
+#ifdef CONFIG_RK3288_DP
+ platform_driver_unregister(&rk3288_edp_driver);
+out_edp:
+#endif
#ifdef CONFIG_RK3288_LVDS
platform_driver_unregister(&rk3288_lvds_driver);
out_lvds:
@@ -596,6 +606,9 @@ static void rockchip_drm_exit(void)
{
platform_device_unregister(rockchip_drm_pdev);
platform_driver_unregister(&rockchip_drm_platform_driver);
+#ifdef CONFIG_RK3288_DP
+ platform_driver_unregister(&rk3288_edp_driver);
+#endif
#ifdef CONFIG_RK3288_LVDS
platform_driver_unregister(&rk3288_lvds_driver);
#endif
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index d28f4dc..565276e 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -128,4 +128,7 @@ extern struct platform_driver rockchip_lcdc_platform_driver;
#ifdef CONFIG_RK3288_LVDS
extern struct platform_driver rk3288_lvds_driver;
#endif
+#ifdef CONFIG_RK3288_DP
+extern struct platform_driver rk3288_edp_driver;
+#endif
#endif /* _ROCKCHIP_DRM_DRV_H_ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/