Re: [PATCH 09/15] pinctrl: pinctrl-at91.c: fix decimal printf format specifiers prefixed with 0x

[Alexandre Belloni]

On 05/08/2014 at 21:43:16 -0700, Hans Wennborg wrote :
> The prefix suggests the number should be printed in hex, so use
> the %x specifier to do that.
> 
> Found by using regex suggested by Joe Perches.
> 
> Signed-off-by: Hans Wennborg <hans@xxxxxxxxxx>
Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>

> ---
>  drivers/pinctrl/pinctrl-at91.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index af1ba4f..60464a2 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -497,10 +497,10 @@ static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
>  static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin)
>  {
>  	if (pin->mux) {
> -		dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n",
> +		dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lx\n",
>  			pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf);
>  	} else {
> -		dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n",
> +		dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lx\n",
>  			pin->bank + 'A', pin->pin, pin->conf);
>  	}
>  }
> -- 
> 2.0.0.526.g5318336
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/