[PATCH V2 3/3] ARM: imx6q: Add the clock route from external OSC to ESAI clock
From: Shengjiu Wang
Date: Wed Aug 06 2014 - 04:35:56 EST
This patch mainly adds the clock route from external 24.576MHz OSC to internal
ESAI clock via analog clock2 PADs on the SoC and pll4 so that ESAI can get an
entirely synchronous clock source against CS42888.
[ 1, We found if using pll4 to generate a 24.576MHz from inernal 24.0MHz OSC,
we would get noise during the audio playback via ESAI->CS42888 even though
this generated clock's rate is equal to the external one statistically. It
might be resulted from the tiny difference between two clock source, which
might be crucial to the sensitive CODEC we use -- CS42888.
2, Ideally, we should use bypass mode for pll4 since we only need to get
the raw rate (24.576MHz) while currently bypass mode in clk-pllv3.c isn't
supported. After bypass mode implement, then we can refine this patch.]
Expected result:
anaclk2 0 1 24576000
lvds2_in 0 1 24576000
pll4_sel 0 1 24576000
pll4_audio 0 1 786432000
pll4_post_div 0 1 786432000
pll4_audio_div 0 1 786432000
esai_sel 0 1 786432000
esai_pred 0 1 98304000
esai_podf 0 1 24576000
esai_extal 0 1 24576000
Signed-off-by: Nicolin Chen <Guangyu.Chen@xxxxxxxxxxxxx>
Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxxxxxxxx>
---
arch/arm/mach-imx/clk-imx6q.c | 5 +++++
arch/arm/mach-imx/mach-imx6q.c | 28 ++++++++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 330aad3..29151cb 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -414,6 +414,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
+ clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_AUDIO_DIV], "pll4_audio_div", NULL);
+ clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_SEL], "pll4_sel", NULL);
+ clk_register_clkdev(clk[IMX6QDL_CLK_LVDS2_IN], "lvds2_in", NULL);
+ clk_register_clkdev(clk[IMX6QDL_CLK_ESAI_EXTAL], "esai_extal", NULL);
if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
cpu_is_imx6dl()) {
@@ -457,6 +461,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
/* Audio-related clocks configuration */
clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
+ clk_set_parent(clk[IMX6QDL_CLK_ESAI_SEL], clk[IMX6QDL_CLK_PLL4_AUDIO_DIV]);
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index d51c6e9..ea24a96 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -362,6 +362,28 @@ put_node:
of_node_put(np);
}
+#define ESAI_AUDIO_MCLK 24576000
+
+static void __init imx6q_audio_lvds2_init(void)
+{
+ struct clk *pll4_sel, *lvds2_in, *pll4_audio_div, *esai_extal;
+
+ pll4_audio_div = clk_get_sys(NULL, "pll4_audio_div");
+ pll4_sel = clk_get_sys(NULL, "pll4_sel");
+ lvds2_in = clk_get_sys(NULL, "lvds2_in");
+ esai_extal = clk_get_sys(NULL, "esai_extal");
+ if (IS_ERR(pll4_audio_div) || IS_ERR(pll4_sel) ||
+ IS_ERR(lvds2_in) || IS_ERR(esai_extal))
+ return;
+
+ if (clk_get_rate(lvds2_in) != ESAI_AUDIO_MCLK)
+ return;
+
+ clk_set_parent(pll4_sel, lvds2_in);
+ clk_set_rate(pll4_audio_div, 786432000);
+ clk_set_rate(esai_extal, ESAI_AUDIO_MCLK);
+}
+
static struct platform_device imx6q_cpufreq_pdev = {
.name = "imx6q-cpufreq",
};
@@ -379,6 +401,12 @@ static void __init imx6q_init_late(void)
imx6q_opp_init();
platform_device_register(&imx6q_cpufreq_pdev);
}
+
+ if (of_machine_is_compatible("fsl,imx6q-sabreauto")
+ || of_machine_is_compatible("fsl,imx6dl-sabreauto")) {
+ imx6q_audio_lvds2_init();
+ }
+
}
static void __init imx6q_map_io(void)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/