Re: [PATCH] PCI: keystone: add a pci quirk to limit mrrs
From: Murali Karicheri
Date: Wed Aug 06 2014 - 15:05:55 EST
On 08/06/2014 01:30 PM, Jason Gunthorpe wrote:
On Wed, Aug 06, 2014 at 01:09:41PM -0400, Murali Karicheri wrote:
Yes it works with tuning enabled. Tuning happens afterwards. The
'limiting mrrs to 256' below is from my patch.
That seems backwards to me...
Rational? The tuning is reading mrrs and set mps to less than or
equal to mrss. So adding this before make sure mrrs used is below
keystones's limit.
The tuning process adjusts the parameters however it sees fit, todays
algorithm might not increase a BIOS set MRRS, but tomorrow's could.
The quirk should be after the tuning to ensure the MRRS is limited..
Jason
Ok. I see it.
The latest possible quirk application point seems to be before enabling
the ep device. A change in macro as below will achieve this and it works.
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_limit_mrrs);
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, quirk_limit_mrrs);
If this looks reasonable, I will repost my patch with this change.
regards,
Murali
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/