Re: [PATCH v4 4/4] ARM: dts: Enable USB otg and host1(dwc) on rk3288-evb

[Doug Anderson]

Kever,

On Thu, Aug 7, 2014 at 2:34 AM, Kever Yang <kever.yang@xxxxxxxxxxxxxx> wrote:
> USB otg port is the usb3.0 b-port on the board.
> USB host1 port is the host A port nearby the otg port.
>
> Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
>
> ---
>
> Changes in v4: None
> Changes in v3:
> - Rebase
>
> Changes in v2:
> - evb patch added in version 2
>
>  arch/arm/boot/dts/rk3288-evb.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
> index 4f57209..a322100 100644
> --- a/arch/arm/boot/dts/rk3288-evb.dtsi
> +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
> @@ -94,3 +94,9 @@
>  &usb_host0_ehci {
>         status = "okay";
>  };
> +&usb_host1 {
> +       status = "okay";
> +};
> +&usb_otg {
> +       status = "okay";
> +};

Do you really want to enable "usb_otg" on EVB?  I think you have a
rework on your board to enable vbus on this port, but I don't think
it's applicable to anyone else, is it?

I'm told that on some boards you can turn on GPIO0_12 to get vbus, but
I don't have a board like that so I can't really test.  Even so,
before enabling the otg port we should probably put something in the
dts file that would turn on that vbus...

Unless you've somehow gotten gadget mode to work on the OTG port, my
vote would be to leave it disabled for the EVB for now.


NOTE: keeping the otg definition in the main "r3288.dtsi" (patch 3/4)
still makes sense because other boards may have the OTG port hooked
up.


-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/