[PATCH 17/20] powerpc/8xx: Better readibility of ERRATA CPU6 handling

[Christophe Leroy]

This patch hiddes that SPR address needed for CPU6 ERRATA handling in the macro.
Then we don't have to worry about this address directly in the code.

Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>

---
 arch/powerpc/kernel/head_8xx.S |   29 ++++++++++++++++-------------
 1 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 82e4139..3e11b87 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -33,12 +33,19 @@
 
 /* Macro to make the code more readable. */
 #ifdef CONFIG_8xx_CPU6
-#define DO_8xx_CPU6(val, reg)	\
-	li	reg, val;	\
-	stw	reg, 12(r0);	\
-	lwz	reg, 12(r0);
+#define SPRN_MI_TWC_ADDR	0x2b80
+#define SPRN_MI_RPN_ADDR	0x2d80
+#define SPRN_MD_TWC_ADDR	0x3b80
+#define SPRN_MD_RPN_ADDR	0x3d80
+
+#define MTSPR_CPU6(spr, reg, treg)	\
+	li	treg, spr##_ADDR;	\
+	stw	treg, 12(r0);		\
+	lwz	treg, 12(r0);		\
+	mtspr	spr, reg
 #else
-#define DO_8xx_CPU6(val, reg)
+#define MTSPR_CPU6(spr, reg, treg)	\
+	mtspr	spr, reg
 #endif
 
 /* 
@@ -333,8 +340,7 @@ InstructionTLBMiss:
 	 * for this "segment."
 	 */
 	ori	r11,r11,1		/* Set valid bit */
-	DO_8xx_CPU6(0x2b80, r3)
-	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
+	MTSPR_CPU6(SPRN_MI_TWC, r11, r3)	/* Set segment attributes */
 	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
 	/* Extract level 2 index */
 	rlwinm	r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
@@ -353,8 +359,7 @@ InstructionTLBMiss:
 	 */
 	li	r11, RPN_PATTERN
 	rlwimi	r10, r11, 0, 0x07f8	/* Set 24-27, clear 21-23,28 */
-	DO_8xx_CPU6(0x2d80, r3)
-	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
+	MTSPR_CPU6(SPRN_MI_RPN, r10, r3)	/* Update TLB entry */
 
 	/* Restore registers */
 #ifdef CONFIG_8xx_CPU6
@@ -423,8 +428,7 @@ DataStoreTLBMiss:
 	 * It is bit 25 in the Linux PTE and bit 30 in the TWC
 	 */
 	rlwimi	r11, r10, 32-5, 30, 30
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11
+	MTSPR_CPU6(SPRN_MD_TWC, r11, r3)
 
 	/* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
 	 * We also need to know if the insn is a load/store, so:
@@ -457,8 +461,7 @@ DataStoreTLBMiss:
 	 */
 2:	li	r11, RPN_PATTERN
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
+	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
 
 	/* Restore registers */
 #ifdef CONFIG_8xx_CPU6
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/