Re: [PATCH v2 1/1] Input: atmel_mxt_ts - Get IRQ edge/level flags on DT booting

[Javier Martinez Canillas]

Hello Linus,

On 08/11/2014 10:32 AM, Linus Walleij wrote:
> I guess this discussion is about drivers/pinctrl/samsung/pinctrl-exynos.c?
> 
> Or else I'm not really following this... $SUBJECT is a bit confusing.
> 

Yes, the thing is that at the beginning I (wrongly) thought that the IRQ trigger
type flags defined in the DTS were discarded if someone called
request_threaded_irq() with a flags != 0. And since the atmel touchpad driver
was pass pdata->irqflags | IRQF_ONESHOT I posted this patch to get the trigger
type parsed from DT and pass it to request_threaded_irq().

But after digging further I found that the issue was in the pinctrl-exynos
driver and Tomasz explained to me that the real cause was that the pin was being
configured from GPIO IRQ to GPIO input (which on other platforms is just the
same mode but on Exynos are two different modes).

At the end passing the trigger type to request_threaded_irq() just had the side
effect to call the exynos .irq_set_type function handler that reconfigured the
pin as GPIO-IRQ and that is why it made it to work. So I posted a patch from
Tomasz that fixes the real cause [0].

I'm so sorry for the confusion.

> Yours,
> Linus Walleij
> 

Best regards,
Javier

[0]: https://lkml.org/lkml/2014/8/8/962
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/