Re: [PATCH v5] input: drv260x: Add TI drv260x haptics driver
From: Murphy, Dan
Date: Tue Aug 12 2014 - 13:29:39 EST
On 08/07/2014 01:16 AM, Dmitry Torokhov wrote:
> On Wed, Aug 06, 2014 at 07:47:25PM +0000, Murphy, Dan wrote:
>> Bump
>>
>> On 07/31/2014 02:14 PM, Murphy, Dan wrote:
>>> Add the TI drv260x haptics/vibrator driver.
>>> This device uses the input force feedback
>>> to produce a wave form to driver an
>>> ERM or LRA actuator device.
>>>
>>> The initial driver supports the devices
>>> real time playback mode. But the device
>>> has additional wave patterns in ROM.
>>>
>>> This functionality will be added in
>>> future patchsets.
>>>
>>> Product data sheet is located here:
>>> http://www.ti.com/product/drv2605
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
>>> ---
>>>
>>> v5 - Move register defines to c file and rm header file, error check
>>> init in probe, fixed identation, remove empty labels in probe
>>> and just return on fail and removed the remove callback and function.
>>> Did not factor out the suspend into a stop function. - https://patchwork.kernel.org/patch/4649631/
>>> v4 - Convert regulator to devm, added error checking where required,
>>> updated bindings doc, moved dt parsing to separate call and made platform
>
> Mark, are you OK with this new updated binding?
>
Mark?
>>> data the first data point, moved vibrator enable and mode programming from
>>> play entry to worker thread, added user check and input mutex in suspend/resume
>>> calls, moved platform data to individual file and into include platform-data directory,
>>> removed file names from file headers - https://patchwork.kernel.org/patch/4642221/
>>> v3 - Updated binding doc, changed to memless device, updated input alloc to
>>> devm, removed mutex locking, add sanity checks for mode and library - https://patchwork.kernel.org/patch/4635421/
>>> v2 - Fixed binding doc and patch headline - https://patchwork.kernel.org/patch/4619641/
>>>
>>>
>>> .../devicetree/bindings/input/ti,drv260x.txt | 50 ++
>>> drivers/input/misc/Kconfig | 9 +
>>> drivers/input/misc/Makefile | 1 +
>>> drivers/input/misc/drv260x.c | 697 ++++++++++++++++++++
>>> include/dt-bindings/input/ti-drv260x.h | 35 +
>>> include/linux/platform_data/drv260x-pdata.h | 29 +
>>> 6 files changed, 821 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt
>>> create mode 100644 drivers/input/misc/drv260x.c
>>> create mode 100644 include/dt-bindings/input/ti-drv260x.h
>>> create mode 100644 include/linux/platform_data/drv260x-pdata.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt
>>> new file mode 100644
>>> index 0000000..8e6970d
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt
>>> @@ -0,0 +1,50 @@
>>> +Texas Instruments - drv260x Haptics driver family
>>> +
>>> +The drv260x family serial control bus communicates through I2C protocols
>>> +
>>> +Required properties:
>>> + - compatible - One of:
>>> + "ti,drv2604" - DRV2604
>>> + "ti,drv2605" - DRV2605
>>> + "ti,drv2605l" - DRV2605L
>>> + - reg - I2C slave address
>>> + - supply- Required supply regulators are:
>>> + "vbat" - battery voltage
>>> + - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h)
>>> + DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric)
>>> + DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration
>>> + sequence during init. And the device is configured for real
>>> + time playback mode (RTP mode).
>>> + DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator)
>>> + - library-sel - These are ROM based waveforms pre-programmed into the IC.
>>> + This should be set to set the library to use at power up.
>>> + (defined in include/dt-bindings/input/ti-drv260x.h)
>>> + DRV260X_LIB_A - Pre-programmed Library
>>> + DRV260X_LIB_B - Pre-programmed Library
>>> + DRV260X_LIB_C - Pre-programmed Library
>>> + DRV260X_LIB_D - Pre-programmed Library
>>> + DRV260X_LIB_E - Pre-programmed Library
>>> + DRV260X_LIB_F - Pre-programmed Library
>>> +
>>> +Optional properties:
>>> + - enable-gpio - gpio pin to enable/disable the device.
>>> + - vib_rated_voltage - The rated voltage of the actuator in millivolts.
>>> + If this is not set then the value will be defaulted to
>>> + 3.2 v.
>>> + - vib_overdrive_voltage - The overdrive voltage of the actuator in millivolts.
>>> + If this is not set then the value will be defaulted to
>>> + 3.2 v.
>>> +Example:
>>> +
>>> +drv2605l: drv2605l@5a {
>>> + compatible = "ti,drv2605l";
>>> + reg = <0x5a>;
>>> + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
>>> + mode = <DRV260X_LRA_MODE>;
>>> + library-sel = <DRV260X_LIB_SEL_DEFAULT>;
>>> + vib-rated-voltage = <3200>;
>>> + vib-overdriver-voltage = <3200>;
>>> +};
>>> +
>>> +For more product information please see the link below:
>>> +http://www.ti.com/product/drv2605
>>> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
>>> index 2ff4425..99f6762 100644
>>> --- a/drivers/input/misc/Kconfig
>>> +++ b/drivers/input/misc/Kconfig
>>> @@ -676,4 +676,13 @@ config INPUT_SOC_BUTTON_ARRAY
>>> To compile this driver as a module, choose M here: the
>>> module will be called soc_button_array.
>>>
>>> +config INPUT_DRV260X_HAPTICS
>>> + tristate "TI DRV260X haptics support"
>>> + depends on INPUT && I2C
>>> + help
>>> + Say Y to enable support for the TI DRV260X haptics driver.
>>> +
>>> + To compile this driver as a module, choose M here: the
>>> + module will be called drv260x-haptics.
>>> +
>>> endif
>>> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
>>> index 4955ad3..d8ef3c7 100644
>>> --- a/drivers/input/misc/Makefile
>>> +++ b/drivers/input/misc/Makefile
>>> @@ -64,3 +64,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
>>> obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
>>> obj-$(CONFIG_INPUT_YEALINK) += yealink.o
>>> obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
>>> +obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
>>> diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
>>> new file mode 100644
>>> index 0000000..6ccdeff
>>> --- /dev/null
>>> +++ b/drivers/input/misc/drv260x.c
>>> @@ -0,0 +1,697 @@
>>> +/*
>>> + * DRV260X haptics driver family
>>> + *
>>> + * Author: Dan Murphy <dmurphy@xxxxxx>
>>> + *
>>> + * Copyright: (C) 2014 Texas Instruments, Inc.
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful, but
>>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>>> + * General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/i2c.h>
>>> +#include <linux/input.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of_gpio.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/regmap.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/regulator/consumer.h>
>>> +
>>> +#include <dt-bindings/input/ti-drv260x.h>
>>> +#include <linux/platform_data/drv260x-pdata.h>
>>> +
>>> +#define DRV260X_STATUS 0x0
>>> +#define DRV260X_MODE 0x1
>>> +#define DRV260X_RT_PB_IN 0x2
>>> +#define DRV260X_LIB_SEL 0x3
>>> +#define DRV260X_WV_SEQ_1 0x4
>>> +#define DRV260X_WV_SEQ_2 0x5
>>> +#define DRV260X_WV_SEQ_3 0x6
>>> +#define DRV260X_WV_SEQ_4 0x7
>>> +#define DRV260X_WV_SEQ_5 0x8
>>> +#define DRV260X_WV_SEQ_6 0x9
>>> +#define DRV260X_WV_SEQ_7 0xa
>>> +#define DRV260X_WV_SEQ_8 0xb
>>> +#define DRV260X_GO 0xc
>>> +#define DRV260X_OVERDRIVE_OFF 0xd
>>> +#define DRV260X_SUSTAIN_P_OFF 0xe
>>> +#define DRV260X_SUSTAIN_N_OFF 0xf
>>> +#define DRV260X_BRAKE_OFF 0x10
>>> +#define DRV260X_A_TO_V_CTRL 0x11
>>> +#define DRV260X_A_TO_V_MIN_INPUT 0x12
>>> +#define DRV260X_A_TO_V_MAX_INPUT 0x13
>>> +#define DRV260X_A_TO_V_MIN_OUT 0x14
>>> +#define DRV260X_A_TO_V_MAX_OUT 0x15
>>> +#define DRV260X_RATED_VOLT 0x16
>>> +#define DRV260X_OD_CLAMP_VOLT 0x17
>>> +#define DRV260X_CAL_COMP 0x18
>>> +#define DRV260X_CAL_BACK_EMF 0x19
>>> +#define DRV260X_FEEDBACK_CTRL 0x1a
>>> +#define DRV260X_CTRL1 0x1b
>>> +#define DRV260X_CTRL2 0x1c
>>> +#define DRV260X_CTRL3 0x1d
>>> +#define DRV260X_CTRL4 0x1e
>>> +#define DRV260X_CTRL5 0x1f
>>> +#define DRV260X_LRA_LOOP_PERIOD 0x20
>>> +#define DRV260X_VBAT_MON 0x21
>>> +#define DRV260X_LRA_RES_PERIOD 0x22
>>> +#define DRV260X_MAX_REG 0x23
>>> +
>>> +#define DRV260X_ALLOWED_R_BYTES 25
>>> +#define DRV260X_ALLOWED_W_BYTES 2
>>> +#define DRV260X_MAX_RW_RETRIES 5
>>> +#define DRV260X_I2C_RETRY_DELAY 10
>>> +
>>> +#define DRV260X_GO_BIT 0x01
>>> +
>>> +/* Library Selection */
>>> +#define DRV260X_LIB_SEL_MASK 0x07
>>> +#define DRV260X_LIB_SEL_RAM 0x0
>>> +#define DRV260X_LIB_SEL_OD 0x1
>>> +#define DRV260X_LIB_SEL_40_60 0x2
>>> +#define DRV260X_LIB_SEL_60_80 0x3
>>> +#define DRV260X_LIB_SEL_100_140 0x4
>>> +#define DRV260X_LIB_SEL_140_PLUS 0x5
>>> +
>>> +#define DRV260X_LIB_SEL_HIZ_MASK 0x10
>>> +#define DRV260X_LIB_SEL_HIZ_EN 0x01
>>> +#define DRV260X_LIB_SEL_HIZ_DIS 0
>>> +
>>> +/* Mode register */
>>> +#define DRV260X_STANDBY (1 << 6)
>>> +#define DRV260X_STANDBY_MASK 0x40
>>> +#define DRV260X_INTERNAL_TRIGGER 0x00
>>> +#define DRV260X_EXT_TRIGGER_EDGE 0x01
>>> +#define DRV260X_EXT_TRIGGER_LEVEL 0x02
>>> +#define DRV260X_PWM_ANALOG_IN 0x03
>>> +#define DRV260X_AUDIOHAPTIC 0x04
>>> +#define DRV260X_RT_PLAYBACK 0x05
>>> +#define DRV260X_DIAGNOSTICS 0x06
>>> +#define DRV260X_AUTO_CAL 0x07
>>> +
>>> +/* Audio to Haptics Control */
>>> +#define DRV260X_AUDIO_HAPTICS_PEAK_10MS (0 << 2)
>>> +#define DRV260X_AUDIO_HAPTICS_PEAK_20MS (1 << 2)
>>> +#define DRV260X_AUDIO_HAPTICS_PEAK_30MS (2 << 2)
>>> +#define DRV260X_AUDIO_HAPTICS_PEAK_40MS (3 << 2)
>>> +
>>> +#define DRV260X_AUDIO_HAPTICS_FILTER_100HZ 0x00
>>> +#define DRV260X_AUDIO_HAPTICS_FILTER_125HZ 0x01
>>> +#define DRV260X_AUDIO_HAPTICS_FILTER_150HZ 0x02
>>> +#define DRV260X_AUDIO_HAPTICS_FILTER_200HZ 0x03
>>> +
>>> +/* Min/Max Input/Output Voltages */
>>> +#define DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT 0x19
>>> +#define DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT 0x64
>>> +#define DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT 0x19
>>> +#define DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT 0xFF
>>> +
>>> +/* Feedback register */
>>> +#define DRV260X_FB_REG_ERM_MODE 0x7f
>>> +#define DRV260X_FB_REG_LRA_MODE (1 << 7)
>>> +
>>> +#define DRV260X_BRAKE_FACTOR_MASK 0x1f
>>> +#define DRV260X_BRAKE_FACTOR_2X (1 << 0)
>>> +#define DRV260X_BRAKE_FACTOR_3X (2 << 4)
>>> +#define DRV260X_BRAKE_FACTOR_4X (3 << 4)
>>> +#define DRV260X_BRAKE_FACTOR_6X (4 << 4)
>>> +#define DRV260X_BRAKE_FACTOR_8X (5 << 4)
>>> +#define DRV260X_BRAKE_FACTOR_16 (6 << 4)
>>> +#define DRV260X_BRAKE_FACTOR_DIS (7 << 4)
>>> +
>>> +#define DRV260X_LOOP_GAIN_LOW 0xf3
>>> +#define DRV260X_LOOP_GAIN_MED (1 << 2)
>>> +#define DRV260X_LOOP_GAIN_HIGH (2 << 2)
>>> +#define DRV260X_LOOP_GAIN_VERY_HIGH (3 << 2)
>>> +
>>> +#define DRV260X_BEMF_GAIN_0 0xfc
>>> +#define DRV260X_BEMF_GAIN_1 (1 << 0)
>>> +#define DRV260X_BEMF_GAIN_2 (2 << 0)
>>> +#define DRV260X_BEMF_GAIN_3 (3 << 0)
>>> +
>>> +/* Control 1 register */
>>> +#define DRV260X_AC_CPLE_EN (1 << 5)
>>> +#define DRV260X_STARTUP_BOOST (1 << 7)
>>> +
>>> +/* Control 2 register */
>>> +
>>> +#define DRV260X_IDISS_TIME_45 0
>>> +#define DRV260X_IDISS_TIME_75 (1 << 0)
>>> +#define DRV260X_IDISS_TIME_150 (1 << 1)
>>> +#define DRV260X_IDISS_TIME_225 0x03
>>> +
>>> +#define DRV260X_BLANK_TIME_45 (0 << 2)
>>> +#define DRV260X_BLANK_TIME_75 (1 << 2)
>>> +#define DRV260X_BLANK_TIME_150 (2 << 2)
>>> +#define DRV260X_BLANK_TIME_225 (3 << 2)
>>> +
>>> +#define DRV260X_SAMP_TIME_150 (0 << 4)
>>> +#define DRV260X_SAMP_TIME_200 (1 << 4)
>>> +#define DRV260X_SAMP_TIME_250 (2 << 4)
>>> +#define DRV260X_SAMP_TIME_300 (3 << 4)
>>> +
>>> +#define DRV260X_BRAKE_STABILIZER (1 << 6)
>>> +#define DRV260X_UNIDIR_IN (0 << 7)
>>> +#define DRV260X_BIDIR_IN (1 << 7)
>>> +
>>> +/* Control 3 Register */
>>> +#define DRV260X_LRA_OPEN_LOOP (1 << 0)
>>> +#define DRV260X_ANANLOG_IN (1 << 1)
>>> +#define DRV260X_LRA_DRV_MODE (1 << 2)
>>> +#define DRV260X_RTP_UNSIGNED_DATA (1 << 3)
>>> +#define DRV260X_SUPPLY_COMP_DIS (1 << 4)
>>> +#define DRV260X_ERM_OPEN_LOOP (1 << 5)
>>> +#define DRV260X_NG_THRESH_0 (0 << 6)
>>> +#define DRV260X_NG_THRESH_2 (1 << 6)
>>> +#define DRV260X_NG_THRESH_4 (2 << 6)
>>> +#define DRV260X_NG_THRESH_8 (3 << 6)
>>> +
>>> +/* Control 4 Register */
>>> +#define DRV260X_AUTOCAL_TIME_150MS (0 << 4)
>>> +#define DRV260X_AUTOCAL_TIME_250MS (1 << 4)
>>> +#define DRV260X_AUTOCAL_TIME_500MS (2 << 4)
>>> +#define DRV260X_AUTOCAL_TIME_1000MS (3 << 4)
>>> +
>>> +/**
>>> + * struct drv260x_data -
>>> + * @input_dev - Pointer to the input device
>>> + * @client - Pointer to the I2C client
>>> + * @regmap - Register map of the device
>>> + * @work - Work item used to off load the enable/disable of the vibration
>>> + * @enable_gpio - Pointer to the gpio used for enable/disabling
>>> + * @regulator - Pointer to the regulator for the IC
>>> + * @magnitude - Magnitude of the vibration event
>>> + * @mode - The operating mode of the IC (LRA_NO_CAL, ERM or LRA)
>>> + * @library - The vibration library to be used
>>> + * @rated_voltage - The rated_voltage of the actuator
>>> + * @overdriver_voltage - The over drive voltage of the actuator
>>> +**/
>>> +struct drv260x_data {
>>> + struct input_dev *input_dev;
>>> + struct i2c_client *client;
>>> + struct regmap *regmap;
>>> + struct work_struct work;
>>> + struct gpio_desc *enable_gpio;
>>> + struct regulator *regulator;
>>> + u32 magnitude;
>>> + u32 mode;
>>> + u32 library;
>>> + int rated_voltage;
>>> + int overdrive_voltage;
>>> +};
>>> +
>>> +static struct reg_default drv260x_reg_defs[] = {
>>> + { DRV260X_STATUS, 0xe0 },
>>> + { DRV260X_MODE, 0x40 },
>>> + { DRV260X_RT_PB_IN, 0x00},
>>> + { DRV260X_LIB_SEL, 0x00},
>>> + { DRV260X_WV_SEQ_1, 0x01},
>>> + { DRV260X_WV_SEQ_2, 0x00},
>>> + { DRV260X_WV_SEQ_3, 0x00},
>>> + { DRV260X_WV_SEQ_4, 0x00},
>>> + { DRV260X_WV_SEQ_5, 0x00},
>>> + { DRV260X_WV_SEQ_6, 0x00},
>>> + { DRV260X_WV_SEQ_7, 0x00},
>>> + { DRV260X_WV_SEQ_8, 0x00},
>>> + { DRV260X_GO, 0x00},
>>> + { DRV260X_OVERDRIVE_OFF, 0x00},
>>> + { DRV260X_SUSTAIN_P_OFF, 0x00},
>>> + { DRV260X_SUSTAIN_N_OFF, 0x00},
>>> + { DRV260X_BRAKE_OFF , 0x00},
>>> + { DRV260X_A_TO_V_CTRL , 0x05},
>>> + { DRV260X_A_TO_V_MIN_INPUT, 0x19},
>>> + { DRV260X_A_TO_V_MAX_INPUT, 0xff},
>>> + { DRV260X_A_TO_V_MIN_OUT, 0x19},
>>> + { DRV260X_A_TO_V_MAX_OUT, 0xff},
>>> + { DRV260X_RATED_VOLT, 0x3e},
>>> + { DRV260X_OD_CLAMP_VOLT, 0x8c},
>>> + { DRV260X_CAL_COMP, 0x0c},
>>> + { DRV260X_CAL_BACK_EMF, 0x6c},
>>> + { DRV260X_FEEDBACK_CTRL, 0x36},
>>> + { DRV260X_CTRL1, 0x93},
>>> + { DRV260X_CTRL2, 0xfa},
>>> + { DRV260X_CTRL3, 0xa0},
>>> + { DRV260X_CTRL4, 0x20},
>>> + { DRV260X_CTRL5, 0x80},
>>> + { DRV260X_LRA_LOOP_PERIOD, 0x33},
>>> + { DRV260X_VBAT_MON, 0x00},
>>> + { DRV260X_LRA_RES_PERIOD, 0x00},
>>> +};
>>> +
>>> +/**
>>> + * Rated and Overdriver Voltages:
>>> + * Calculated using the formula r = v * 255 / 5.6
>>> + * where r is what will be written to the register
>>> + * and v is the rated or overdriver voltage of the actuator
>>> + **/
>>> +#define DRV260X_DEF_RATED_VOLT 0x90
>>> +#define DRV260X_DEF_OD_CLAMP_VOLT 0x90
>>> +
>>> +static int drv260x_calculate_voltage(int voltage)
>>> +{
>>> + return (voltage * 255 / 5600);
>>> +}
>>> +
>>> +static void drv260x_worker(struct work_struct *work)
>>> +{
>>> + struct drv260x_data *haptics = container_of(work, struct drv260x_data, work);
>>> + int ret;
>>> +
>>> + gpiod_set_value(haptics->enable_gpio, 1);
>>> + /* Data sheet says to wait 250us before trying to communicate */
>>> + udelay(250);
>>> +
>>> + ret = regmap_write(haptics->regmap, DRV260X_MODE, DRV260X_RT_PLAYBACK);
>>> + if (ret != 0) {
>>> + dev_err(&haptics->client->dev,
>>> + "Failed to write set mode: %d\n", ret);
>>> + return;
>>> + }
>>> +
>>> + ret = regmap_write(haptics->regmap, DRV260X_RT_PB_IN, haptics->magnitude);
>>> + if (ret != 0) {
>>> + dev_err(&haptics->client->dev,
>>> + "Failed to set magnitude: %d\n", ret);
>>> + }
>>> +}
>>> +
>>> +static int drv260x_haptics_play(struct input_dev *input, void *data,
>>> + struct ff_effect *effect)
>>> +{
>>> + struct drv260x_data *haptics = input_get_drvdata(input);
>>> +
>>> + haptics->mode = DRV260X_LRA_NO_CAL_MODE;
>>> + haptics->magnitude = 0;
>>> +
>>> + if (effect->u.rumble.strong_magnitude ||
>>> + effect->u.rumble.weak_magnitude) {
>>> + if (effect->u.rumble.strong_magnitude > 0)
>>> + haptics->magnitude = effect->u.rumble.strong_magnitude;
>>> + else if (effect->u.rumble.weak_magnitude > 0)
>>> + haptics->magnitude = effect->u.rumble.weak_magnitude;
>>> + }
>>> +
>>> + schedule_work(&haptics->work);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void drv260x_close(struct input_dev *input)
>>> +{
>>> + struct drv260x_data *haptics = input_get_drvdata(input);
>>> + int ret;
>>> +
>>> + cancel_work_sync(&haptics->work);
>>> +
>>> + ret = regmap_write(haptics->regmap, DRV260X_MODE, DRV260X_STANDBY);
>>> + if (ret != 0) {
>>> + dev_err(&haptics->client->dev,
>>> + "Failed to write standby mode: %d\n", ret);
>>> + }
>>> +
>>> + gpiod_set_value(haptics->enable_gpio, 0);
>>> +}
>>> +
>>> +static const struct reg_default drv260x_lra_cal_regs[] = {
>>> + { DRV260X_MODE, DRV260X_AUTO_CAL },
>>> + { DRV260X_CTRL3, DRV260X_NG_THRESH_2},
>>> + { DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE | DRV260X_BRAKE_FACTOR_4X | DRV260X_LOOP_GAIN_HIGH },
>>> +};
>>> +
>>> +static const struct reg_default drv260x_lra_init_regs[] = {
>>> + { DRV260X_MODE, DRV260X_RT_PLAYBACK},
>>> + { DRV260X_A_TO_V_CTRL, DRV260X_AUDIO_HAPTICS_PEAK_20MS | DRV260X_AUDIO_HAPTICS_FILTER_125HZ},
>>> + { DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT },
>>> + { DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT },
>>> + { DRV260X_A_TO_V_MIN_OUT, DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT },
>>> + { DRV260X_A_TO_V_MAX_OUT, DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT },
>>> + { DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE | DRV260X_BRAKE_FACTOR_2X | DRV260X_LOOP_GAIN_MED | DRV260X_BEMF_GAIN_3 },
>>> + { DRV260X_CTRL1, DRV260X_STARTUP_BOOST },
>>> + { DRV260X_CTRL2, DRV260X_SAMP_TIME_250 },
>>> + { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_ANANLOG_IN },
>>> + { DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS },
>>> +};
>>> +
>>> +static const struct reg_default drv260x_erm_cal_regs[] = {
>>> + { DRV260X_MODE, DRV260X_AUTO_CAL },
>>> + { DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT },
>>> + { DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT },
>>> + { DRV260X_A_TO_V_MIN_OUT, DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT },
>>> + { DRV260X_A_TO_V_MAX_OUT, DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT },
>>> + { DRV260X_FEEDBACK_CTRL, DRV260X_BRAKE_FACTOR_3X | DRV260X_LOOP_GAIN_MED | DRV260X_BEMF_GAIN_2 },
>>> + { DRV260X_CTRL1, DRV260X_STARTUP_BOOST },
>>> + { DRV260X_CTRL2, DRV260X_SAMP_TIME_250 | DRV260X_BLANK_TIME_75 | DRV260X_SAMP_TIME_250 | DRV260X_IDISS_TIME_75 },
>>> + { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_ERM_OPEN_LOOP },
>>> + { DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS },
>>> +};
>>> +
>>> +static int drv260x_init(struct drv260x_data *haptics)
>>> +{
>>> + int ret;
>>> + unsigned int cal_buf;
>>> +
>>> + ret = regmap_write(haptics->regmap,
>>> + DRV260X_RATED_VOLT, haptics->rated_voltage);
>>> + if (ret != 0)
>>> + goto write_failure;
>>> +
>>> + ret = regmap_write(haptics->regmap,
>>> + DRV260X_OD_CLAMP_VOLT, haptics->overdrive_voltage);
>>> + if (ret != 0)
>>> + goto write_failure;
>>> +
>>> + switch(haptics->mode) {
>>> + case DRV260X_LRA_MODE:
>>> + ret = regmap_register_patch(haptics->regmap,
>>> + drv260x_lra_cal_regs,
>>> + ARRAY_SIZE(drv260x_lra_cal_regs));
>>> + if (ret != 0)
>>> + goto write_failure;
>>> + break;
>>> + case DRV260X_ERM_MODE:
>>> + ret = regmap_register_patch(haptics->regmap,
>>> + drv260x_erm_cal_regs,
>>> + ARRAY_SIZE(drv260x_erm_cal_regs));
>>> + if (ret != 0)
>>> + goto write_failure;
>>> +
>>> + ret = regmap_update_bits(haptics->regmap, DRV260X_LIB_SEL,
>>> + DRV260X_LIB_SEL_MASK,
>>> + haptics->library);
>>> + if (ret != 0)
>>> + goto write_failure;
>>> + break;
>>> + default:
>>> + ret = regmap_register_patch(haptics->regmap,
>>> + drv260x_lra_init_regs,
>>> + ARRAY_SIZE(drv260x_lra_init_regs));
>>> + if (ret != 0)
>>> + goto write_failure;
>>> +
>>> + ret = regmap_update_bits(haptics->regmap, DRV260X_LIB_SEL,
>>> + DRV260X_LIB_SEL_MASK,
>>> + haptics->library);
>>> + if (ret != 0)
>>> + goto write_failure;
>>> +
>>> + goto skip_go_bit;
>>> + break;
>>> + }
>>> +
>>> + if (ret != 0) {
>>> + dev_err(&haptics->client->dev,
>>> + "Failed to write init registers: %d\n",
>>> + ret);
>>> + goto write_failure;
>>> + }
>>> +
>>> + ret = regmap_write(haptics->regmap, DRV260X_GO, DRV260X_GO_BIT);
>>> + if (ret != 0)
>>> + goto write_failure;
>>> +
>>> + do {
>>> + ret = regmap_read(haptics->regmap, DRV260X_GO, &cal_buf);
>>> + if (ret != 0)
>>> + goto write_failure;
>>> + } while (cal_buf == DRV260X_GO_BIT || ret != 0);
>>> +
>>> + return ret;
>>> +
>>> +write_failure:
>>> + dev_err(&haptics->client->dev,
>>> + "Failed to write init registers: %d\n",
>>> + ret);
>>> +skip_go_bit:
>>> + return ret;
>>> +}
>>> +
>>> +static const struct regmap_config drv260x_regmap_config = {
>>> + .reg_bits = 8,
>>> + .val_bits = 8,
>>> +
>>> + .max_register = DRV260X_MAX_REG,
>>> + .reg_defaults = drv260x_reg_defs,
>>> + .num_reg_defaults = ARRAY_SIZE(drv260x_reg_defs),
>>> + .cache_type = REGCACHE_NONE,
>>> +};
>>> +
>>> +#ifdef CONFIG_OF
>>> +static int drv260x_parse_dt(struct device_node *dev_node,
>>> + struct drv260x_data *haptics,
>>> + struct device *dev)
>>> +{
>>> + int ret;
>>> + int voltage;
>>> +
>>> + ret = of_property_read_u32(dev_node, "mode", &haptics->mode);
>>> + if (ret < 0) {
>>> + dev_err(dev, "%s: No entry for mode\n", __func__);
>>> +
>>> + return ret;
>>> + }
>>> + ret = of_property_read_u32(dev_node, "library-sel",
>>> + &haptics->library);
>>> + if (ret < 0) {
>>> + dev_err(dev, "%s: No entry for library selection\n",
>>> + __func__);
>>> +
>>> + return ret;
>>> + }
>>> + ret = of_property_read_u32(dev_node, "vib-rated-voltage",
>>> + &voltage);
>>> + if (!ret)
>>> + haptics->rated_voltage = drv260x_calculate_voltage(voltage);
>>> +
>>> +
>>> + ret = of_property_read_u32(dev_node, "vib-overdrive-voltage",
>>> + &voltage);
>>> + if (!ret)
>>> + haptics->overdrive_voltage = drv260x_calculate_voltage(voltage);
>>> +
>>> + return ret;
>>> +
>>> +}
>>> +#else
>>> +static inline int drv260x_parse_dt(struct device *dev)
>>> +{
>>> + dev_err(dev, "no platform data defined\n");
>>> +
>>> + return -EINVAL;
>>> +}
>>> +#endif
>>> +static int drv260x_probe(struct i2c_client *client,
>>> + const struct i2c_device_id *id)
>>> +{
>>> + struct drv260x_data *haptics;
>>> + struct device_node *np = client->dev.of_node;
>>> + struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev);
>>> + int ret;
>>> +
>>> + haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
>>> + if (!haptics)
>>> + return -ENOMEM;
>>> +
>>> + haptics->rated_voltage = DRV260X_DEF_OD_CLAMP_VOLT;
>>> + haptics->rated_voltage = DRV260X_DEF_RATED_VOLT;
>>> +
>>> + if (pdata) {
>>> + haptics->mode = pdata->mode;
>>> + haptics->library = pdata->library_selection;
>>> + if (pdata->vib_overdrive_voltage)
>>> + haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage);
>>> + if (pdata->vib_rated_voltage)
>>> + haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage);
>>> + } else if (np) {
>>> + ret = drv260x_parse_dt(np, haptics, &client->dev);
>>> + if (ret)
>>> + return ret;
>>> + } else {
>>> + dev_err(&client->dev, "Platform data not set\n");
>>> + return -ENODEV;
>>> + }
>>> +
>>> +
>>> + if (haptics->mode < DRV260X_LRA_MODE ||
>>> + haptics->mode > DRV260X_ERM_MODE) {
>>> + dev_err(&client->dev,
>>> + "Vibrator mode is invalid: %i\n",
>>> + haptics->mode);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if (haptics->library < DRV260X_LIB_SEL_DEFAULT ||
>>> + haptics->library > DRV260X_LIB_F) {
>>> + dev_err(&client->dev,
>>> + "Library value is invalid: %i\n", haptics->library);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + haptics->regulator = devm_regulator_get(&client->dev, "vbat");
>>> + if (IS_ERR(haptics->regulator)) {
>>> + ret = PTR_ERR(haptics->regulator);
>>> + dev_err(&client->dev,
>>> + "unable to get regulator, error: %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + haptics->enable_gpio = devm_gpiod_get(&client->dev, "enable");
>>> + if (IS_ERR(haptics->enable_gpio)) {
>>> + ret = PTR_ERR(haptics->enable_gpio);
>>> + if (ret != -ENOENT && ret != -ENOSYS)
>>> + return ret;
>>> + haptics->enable_gpio = NULL;
>>> + } else {
>>> + gpiod_direction_output(haptics->enable_gpio, 1);
>>> + }
>>> +
>>> + haptics->input_dev = devm_input_allocate_device(&client->dev);
>>> + if (haptics->input_dev == NULL) {
>>> + dev_err(&client->dev, "Failed to allocate input device\n");
>>> + ret = -ENOMEM;
>>> + return ret;
>>> + }
>>> +
>>> + haptics->input_dev->name = "drv260x:haptics";
>>> + haptics->input_dev->dev.parent = client->dev.parent;
>>> + haptics->input_dev->close = drv260x_close;
>>> + input_set_drvdata(haptics->input_dev, haptics);
>>> + input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
>>> +
>>> + ret = input_ff_create_memless(haptics->input_dev, NULL,
>>> + drv260x_haptics_play);
>>> + if (ret < 0) {
>>> + dev_err(&client->dev, "input_ff_create() failed: %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> +
>>> + INIT_WORK(&haptics->work, drv260x_worker);
>>> +
>>> + haptics->client = client;
>>> + i2c_set_clientdata(client, haptics);
>>> +
>>> + haptics->regmap = devm_regmap_init_i2c(client, &drv260x_regmap_config);
>>> + if (IS_ERR(haptics->regmap)) {
>>> + ret = PTR_ERR(haptics->regmap);
>>> + dev_err(&client->dev, "Failed to allocate register map: %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> +
>>> + ret = drv260x_init(haptics);
>>> + if (ret < 0) {
>>> + dev_err(&client->dev, "Device init failed: %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + ret = input_register_device(haptics->input_dev);
>>> + if (ret < 0) {
>>> + dev_err(&client->dev, "couldn't register input device: %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +#ifdef CONFIG_PM_SLEEP
>>> +static int drv260x_suspend(struct device *dev)
>>> +{
>>> + struct drv260x_data *haptics = dev_get_drvdata(dev);
>>> + int ret = 0;
>>> +
>>> + mutex_lock(&haptics->input_dev->mutex);
>>> +
>>> + if (haptics->input_dev->users) {
>>> + ret = regmap_update_bits(haptics->regmap,
>>> + DRV260X_MODE,
>>> + DRV260X_STANDBY_MASK,
>>> + DRV260X_STANDBY);
>>> + if (ret) {
>>> + dev_err(dev, "Failed to set standby mode\n");
>>> + goto out;
>>> + }
>>> +
>>> + gpiod_set_value(haptics->enable_gpio, 0);
>>> +
>>> + ret = regulator_disable(haptics->regulator);
>>> + if (ret)
>>> + dev_err(dev, "Failed to disable regulator\n");
>>> + }
>>> +out:
>>> + mutex_unlock(&haptics->input_dev->mutex);
>>> + return ret;
>>> +}
>>> +
>>> +static int drv260x_resume(struct device *dev)
>>> +{
>>> + struct drv260x_data *haptics = dev_get_drvdata(dev);
>>> + int ret = 0;
>>> +
>>> + mutex_lock(&haptics->input_dev->mutex);
>>> +
>>> + if (haptics->input_dev->users) {
>>> + ret = regulator_enable(haptics->regulator);
>>> + if (ret) {
>>> + dev_err(dev, "Failed to enable regulator\n");
>>> + goto out;
>>> + }
>>> + ret = regmap_update_bits(haptics->regmap,
>>> + DRV260X_MODE,
>>> + DRV260X_STANDBY_MASK, 0);
>>> + if (ret) {
>>> + dev_err(dev, "Failed to unset standby mode\n");
>>> + goto out;
>>> + }
>>> +
>>> + gpiod_set_value(haptics->enable_gpio, 1);
>>> + }
>>> +
>>> +out:
>>> + mutex_unlock(&haptics->input_dev->mutex);
>>> + return ret;
>>> +}
>>> +#endif
>>> +
>>> +static SIMPLE_DEV_PM_OPS(drv260x_pm_ops, drv260x_suspend, drv260x_resume);
>>> +
>>> +static const struct i2c_device_id drv260x_id[] = {
>>> + { "drv2605l", 0 },
>>> + { }
>>> +};
>>> +MODULE_DEVICE_TABLE(i2c, drv260x_id);
>>> +
>>> +#if IS_ENABLED(CONFIG_OF)
>>> +static const struct of_device_id drv260x_of_match[] = {
>>> + { .compatible = "ti,drv2604", },
>>> + { .compatible = "ti,drv2604l", },
>>> + { .compatible = "ti,drv2605", },
>>> + { .compatible = "ti,drv2605l", },
>>> + {}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, drv260x_of_match);
>>> +#endif
>>> +
>>> +static struct i2c_driver drv260x_driver = {
>>> + .probe = drv260x_probe,
>>> + .driver = {
>>> + .name = "drv260x-haptics",
>>> + .owner = THIS_MODULE,
>>> + .of_match_table = of_match_ptr(drv260x_of_match),
>>> + .pm = &drv260x_pm_ops,
>>> + },
>>> + .id_table = drv260x_id,
>>> +};
>>> +module_i2c_driver(drv260x_driver);
>>> +
>>> +MODULE_ALIAS("platform:drv260x-haptics");
>>> +MODULE_DESCRIPTION("TI DRV260x haptics driver");
>>> +MODULE_LICENSE("GPL");
>>> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>");
>>> diff --git a/include/dt-bindings/input/ti-drv260x.h b/include/dt-bindings/input/ti-drv260x.h
>>> new file mode 100644
>>> index 0000000..be7f245
>>> --- /dev/null
>>> +++ b/include/dt-bindings/input/ti-drv260x.h
>>> @@ -0,0 +1,35 @@
>>> +/*
>>> + * DRV260X haptics driver family
>>> + *
>>> + * Author: Dan Murphy <dmurphy@xxxxxx>
>>> + *
>>> + * Copyright: (C) 2014 Texas Instruments, Inc.
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful, but
>>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>>> + * General Public License for more details.
>>> + */
>>> +
>>> +#ifndef _DT_BINDINGS_TI_DRV260X_H
>>> +#define _DT_BINDINGS_TI_DRV260X_H
>>> +
>>> +/* Calibration Types */
>>> +#define DRV260X_LRA_MODE 0x00
>>> +#define DRV260X_LRA_NO_CAL_MODE 0x01
>>> +#define DRV260X_ERM_MODE 0x02
>>> +
>>> +/* Library Selection */
>>> +#define DRV260X_LIB_SEL_DEFAULT 0x00
>>> +#define DRV260X_LIB_A 0x01
>>> +#define DRV260X_LIB_B 0x02
>>> +#define DRV260X_LIB_C 0x03
>>> +#define DRV260X_LIB_D 0x04
>>> +#define DRV260X_LIB_E 0x05
>>> +#define DRV260X_LIB_F 0x06
>>> +
>>> +#endif
>>> diff --git a/include/linux/platform_data/drv260x-pdata.h b/include/linux/platform_data/drv260x-pdata.h
>>> new file mode 100644
>>> index 0000000..4091a9b
>>> --- /dev/null
>>> +++ b/include/linux/platform_data/drv260x-pdata.h
>>> @@ -0,0 +1,29 @@
>>> +/*
>>> + * Platform data for DRV260X haptics driver family
>>> + *
>>> + * Author: Dan Murphy <dmurphy@xxxxxx>
>>> + *
>>> + * Copyright: (C) 2014 Texas Instruments, Inc.
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful, but
>>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>>> + * General Public License for more details.
>>> + */
>>> +
>>> +#ifndef _LINUX_DRV260X_PDATA_H
>>> +#define _LINUX_DRV260X_PDATA_H
>>> +
>>> +struct drv260x_platform_data {
>>> + int enable_gpio;
>>> + u32 library_selection;
>>> + u32 mode;
>>> + u32 vib_rated_voltage;
>>> + u32 vib_overdrive_voltage;
>>> +};
>>> +
>>> +#endif
>>>
>>
>>
>> --
>> ------------------
>> Dan Murphy
>
--
------------------
Dan Murphy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/