Re: [PATCH] ARM: dts: Add mmc0 and mmc1 aliases for rk3288

[Addy]

> It's convenient (and less confusing to people reading logs) if the
> eMMC port on rk3288 is consistenly marked with mmc0 and the sdmmc port
> on rk3288 is consistently marked with mmc1.  Add the appropriate
> aliases.
>
> These aliases only actually do something if a patch like
> (https://patchwork.kernel.org/patch/3925551/) lands, but they don't
> hurt even before that patch.
>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> Reviewed-by: Sonny Rao <sonnyrao@xxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/rk3288.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 36be7bb..0b54b0d 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -29,6 +29,8 @@
>  		i2c3 = &i2c3;
>  		i2c4 = &i2c4;
>  		i2c5 = &i2c5;
> +		mmc0 = &emmc;
> +		mmc1 = &sdmmc;
There are 8 registers can be configured for clock tunning(see chapter 3,
page 133):
sdmmc: CRU_SDMMC_CON0(offset: 0x200)
CRU_SDMMC_CON1(offset: 0x204)
sdio0: CRU_SDMMC_CON2(offset: 0x208)
CRU_SDMMC_CON3(offset: 0x20c)
sdio1: CRU_SDMMC_CON4(offset: 0x210)
CRU_SDMMC_CON5(offset: 0x214)
emmc: CRU_SDMMC_CON6(offset: 0x218)
CRU_SDMMC_CON7(offset: 0x21c)

I think maybe it is suitable as follows:
mmc0 = &sdmmc
mmc1 = &sdio0
mmc2 = &sdio1
mmc3 = &emmc

So we can get ctrl_id:
ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");

and can get offset of registers:
offset = 0x200 + ctrl_id * 8 + 4 * drive_or_sample

>  		serial0 = &uart0;
>  		serial1 = &uart1;
>  		serial2 = &uart2;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/