[PATCH] ARM: apq8064: Add pinmux and i2c pinctrl nodes

[Kiran Padwal]

This patch adds pinmux and i2c pinctrl DT node for IFC6410 board.
It also adds necessary DT support for i2c eeprom which is present on
IFC6410.

Tested on IFC6410 board.

Signed-off-by: Kiran Padwal <kiran.padwal@xxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts |   29 ++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi        |   59 ++++++++++++++++++++++++++++
 2 files changed, 88 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 7c2441d..d52ac3c 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -5,6 +5,15 @@
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
 
 	soc {
+		pinmux@800000 {
+			i2c1_pins: i2c1_pinmux {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
+		};
+
 		gsbi@16600000 {
 			status = "ok";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -12,5 +21,25 @@
 				status = "ok";
 			};
 		};
+
+		gsbi1: gsbi@12440000 {
+			qcom,mode = <GSBI_PROT_I2C>;
+			status = "ok";
+
+			i2c1: i2c@12460000 {
+				status = "ok";
+
+				clock-frequency = <200000>;
+
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 92bf793..fbebf5c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -70,6 +70,17 @@
 		ranges;
 		compatible = "simple-bus";
 
+		qcom_pinmux: pinmux@800000 {
+			compatible = "qcom,apq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 32 0x4>;
+		};
+
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
@@ -133,6 +144,54 @@
 			regulator;
 		};
 
+		gsbi1: gsbi@12440000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12440000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x12460000 0x1000>;
+				interrupts = <0 194 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi2: gsbi@12480000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				interrupts = <0 196 0>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gsbi7: gsbi@16600000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/