Re: [PATCH] ARM: apq8064: Add pinmux and i2c pinctrl nodes

[kiran . padwal]

On Thursday, August 14, 2014 6:37pm, "Bjorn Andersson" <bjorn@xxxxxxx> said:

> On Thu, Aug 14, 2014 at 12:20 AM, Kiran Padwal
> <kiran.padwal@xxxxxxxxxxxxxxx> wrote:
>> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi
>> b/arch/arm/boot/dts/qcom-apq8064.dtsi
>> index 92bf793..fbebf5c 100644
>> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
>> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
>> @@ -70,6 +70,17 @@
>>                 ranges;
>>                 compatible = "simple-bus";
>>
>> +               qcom_pinmux: pinmux@800000 {
> 
> There are (at least) three different pinmuxes in these platforms: TLMM, PMIC
> GPIO, PMIC MPP. Also this is the phandle that is used to reference the gpio
> chip throughout the board.
> 
> So I would like to suggest that we name it "tlmm" or like in the downstream
> kernel "msmgpio".

ok. How about "qcomgpio" or rename it to msmgpio?

> 
>> +                       compatible = "qcom,apq8064-pinctrl";
>> +                       reg = <0x800000 0x4000>;
>> +
>> +                       gpio-controller;
>> +                       #gpio-cells = <2>;
>> +                       interrupt-controller;
>> +                       #interrupt-cells = <2>;
>> +                       interrupts = <0 32 0x4>;
> 
> I must have gotten this wrong in the dt binding example, sorry about that.
> interrupts should be <0 16 0x4>.

Thanks for information. I will update that.
 
> 
>> +               };
> 
> Regards,
> Bjorn
> 



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/