Re: [PATCH RFC 6/7] usb: host: ehci-exynos: Remove unnecessary usb-phy support
From: Jingoo Han
Date: Sun Aug 17 2014 - 21:36:16 EST
On Thursday, August 14, 2014 11:24 PM, Vivek Gautam wrote:
>
> Now that we have completely moved from older USB-PHY drivers
> to newer GENERIC-PHY drivers for PHYs available with USB controllers
> on Exynos series of SoCs, we can remove the support for the same
> in our host drivers too.
> This should fix the issue on ehci-exynos, wherein in the absence of
> SAMSUNG_USB2PHY config symbol, we ended up getting the NOP_USB_XCEIV phy
> when the same is enabled. And thus the PHYs are not configured properly.
>
> Reported-by: Sachin Kamat <sachin.kamat@xxxxxxxxxxx>
> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
Reviewed-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
Best regards,
Jingoo Han
> ---
> drivers/usb/host/ehci-exynos.c | 53 ++++++----------------------------------
> 1 file changed, 8 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
> index cda0a2f..54944cc 100644
> --- a/drivers/usb/host/ehci-exynos.c
> +++ b/drivers/usb/host/ehci-exynos.c
> @@ -21,11 +21,8 @@
> #include <linux/of_gpio.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> -#include <linux/usb/phy.h>
> -#include <linux/usb/samsung_usb_phy.h>
> #include <linux/usb.h>
> #include <linux/usb/hcd.h>
> -#include <linux/usb/otg.h>
>
> #include "ehci.h"
>
> @@ -47,9 +44,7 @@ static struct hc_driver __read_mostly exynos_ehci_hc_driver;
>
> struct exynos_ehci_hcd {
> struct clk *clk;
> - struct usb_phy *phy;
> - struct usb_otg *otg;
> - struct phy *phy_g[PHY_NUMBER];
> + struct phy *phy[PHY_NUMBER];
> };
>
> #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
> @@ -62,18 +57,6 @@ static int exynos_ehci_get_phy(struct device *dev,
> int phy_number;
> int ret = 0;
>
> - exynos_ehci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> - if (IS_ERR(exynos_ehci->phy)) {
> - ret = PTR_ERR(exynos_ehci->phy);
> - if (ret != -ENXIO && ret != -ENODEV) {
> - dev_err(dev, "no usb2 phy configured\n");
> - return ret;
> - }
> - dev_dbg(dev, "Failed to get usb2 phy\n");
> - } else {
> - exynos_ehci->otg = exynos_ehci->phy->otg;
> - }
> -
> for_each_available_child_of_node(dev->of_node, child) {
> ret = of_property_read_u32(child, "reg", &phy_number);
> if (ret) {
> @@ -98,7 +81,7 @@ static int exynos_ehci_get_phy(struct device *dev,
> }
> dev_dbg(dev, "Failed to get usb2 phy\n");
> }
> - exynos_ehci->phy_g[phy_number] = phy;
> + exynos_ehci->phy[phy_number] = phy;
> }
>
> return ret;
> @@ -111,16 +94,13 @@ static int exynos_ehci_phy_enable(struct device *dev)
> int i;
> int ret = 0;
>
> - if (!IS_ERR(exynos_ehci->phy))
> - return usb_phy_init(exynos_ehci->phy);
> -
> for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
> - if (!IS_ERR(exynos_ehci->phy_g[i]))
> - ret = phy_power_on(exynos_ehci->phy_g[i]);
> + if (!IS_ERR(exynos_ehci->phy[i]))
> + ret = phy_power_on(exynos_ehci->phy[i]);
> if (ret)
> for (i--; i >= 0; i--)
> - if (!IS_ERR(exynos_ehci->phy_g[i]))
> - phy_power_off(exynos_ehci->phy_g[i]);
> + if (!IS_ERR(exynos_ehci->phy[i]))
> + phy_power_off(exynos_ehci->phy[i]);
>
> return ret;
> }
> @@ -131,14 +111,9 @@ static void exynos_ehci_phy_disable(struct device *dev)
> struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
> int i;
>
> - if (!IS_ERR(exynos_ehci->phy)) {
> - usb_phy_shutdown(exynos_ehci->phy);
> - return;
> - }
> -
> for (i = 0; i < PHY_NUMBER; i++)
> - if (!IS_ERR(exynos_ehci->phy_g[i]))
> - phy_power_off(exynos_ehci->phy_g[i]);
> + if (!IS_ERR(exynos_ehci->phy[i]))
> + phy_power_off(exynos_ehci->phy[i]);
> }
>
> static void exynos_setup_vbus_gpio(struct device *dev)
> @@ -231,9 +206,6 @@ skip_phy:
> goto fail_io;
> }
>
> - if (exynos_ehci->otg)
> - exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
> -
> err = exynos_ehci_phy_enable(&pdev->dev);
> if (err) {
> dev_err(&pdev->dev, "Failed to enable USB phy\n");
> @@ -273,9 +245,6 @@ static int exynos_ehci_remove(struct platform_device *pdev)
>
> usb_remove_hcd(hcd);
>
> - if (exynos_ehci->otg)
> - exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
> -
> exynos_ehci_phy_disable(&pdev->dev);
>
> clk_disable_unprepare(exynos_ehci->clk);
> @@ -298,9 +267,6 @@ static int exynos_ehci_suspend(struct device *dev)
> if (rc)
> return rc;
>
> - if (exynos_ehci->otg)
> - exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
> -
> exynos_ehci_phy_disable(dev);
>
> clk_disable_unprepare(exynos_ehci->clk);
> @@ -316,9 +282,6 @@ static int exynos_ehci_resume(struct device *dev)
>
> clk_prepare_enable(exynos_ehci->clk);
>
> - if (exynos_ehci->otg)
> - exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
> -
> ret = exynos_ehci_phy_enable(dev);
> if (ret) {
> dev_err(dev, "Failed to enable USB phy\n");
> --
> 1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/