Re: [PATCH 2/2] Input: atmel_mxt_ts - Add keycodes array example

[Javier Martinez Canillas]

Hello Nick,

On 08/15/2014 06:08 PM, Nick Dyer wrote:
>> 
>> Any comments on this? I would really appreciate if you can expand on how
>> this DT property is supposed to be used so I can re-spin the atmel support
>> patch for Peach boards.
> 
> The below patch improves the documentation for the gpio-property. Stephen
> Warren has a good example here:
> https://github.com/swarren/linux-tegra/commit/09789801
> 
> trackpad@4b {
>   compatible = "atmel,maxtouch";
>   reg = <0x4b>;
>   interrupt-parent = <&gpio>;
>   interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
>   linux,gpio-keymap = <0 0 0 BTN_LEFT>;
> };
> 
> This maps BTN_LEFT to the 4th bit of the T19 message. I haven't looked up
> what GPIO number that corresponds to on the mXT224SL that he has, it varies
> with the particular maXTouch device you have.
> 
> Hope this helps.
>

Thanks a lot for the patch and the pointer to Stephen's DTS. I'll do some
experimentation then to figure out the right values since I don't have
proper documentation. Fortunately the Chrome OS 3.8 downstream driver
works on -next so I can use evdev to compare if both drivers behave the same.

> Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>

Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/