[PATCH RESEND v3 02/12] usb: dwc2/gadget: fix phy initialization sequence

[Robert Baldyga]

From: Kamil Debski <k.debski@xxxxxxxxxxx>

In the Generic PHY Framework a NULL phy is considered to be a valid phy
thus the "if (hsotg->phy)" check does not give us the information whether
the Generic PHY Framework is used.

In addition to the above this patch also removes phy_init from probe and
phy_exit from remove. This is not necessary when init/exit is done in the
s3c_hsotg_phy_enable/disable functions.

Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
---
 drivers/usb/dwc2/gadget.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index d27417e..f0135a5 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2747,13 +2747,14 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
 
 	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
 
-	if (hsotg->phy) {
-		phy_init(hsotg->phy);
-		phy_power_on(hsotg->phy);
-	} else if (hsotg->uphy)
+	if (hsotg->uphy)
 		usb_phy_init(hsotg->uphy);
-	else if (hsotg->plat->phy_init)
+	else if (hsotg->plat && hsotg->plat->phy_init)
 		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
+	else {
+		phy_init(hsotg->phy);
+		phy_power_on(hsotg->phy);
+	}
 }
 
 /**
@@ -2767,13 +2768,14 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
 {
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
-	if (hsotg->phy) {
-		phy_power_off(hsotg->phy);
-		phy_exit(hsotg->phy);
-	} else if (hsotg->uphy)
+	if (hsotg->uphy)
 		usb_phy_shutdown(hsotg->uphy);
-	else if (hsotg->plat->phy_exit)
+	else if (hsotg->plat && hsotg->plat->phy_exit)
 		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
+	else {
+		phy_power_off(hsotg->phy);
+		phy_exit(hsotg->phy);
+	}
 }
 
 /**
@@ -3486,9 +3488,6 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 	if (hsotg->phy && (phy_get_bus_width(phy) == 8))
 		hsotg->phyif = GUSBCFG_PHYIF8;
 
-	if (hsotg->phy)
-		phy_init(hsotg->phy);
-
 	/* usb phy enable */
 	s3c_hsotg_phy_enable(hsotg);
 
@@ -3580,8 +3579,6 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 		usb_gadget_unregister_driver(hsotg->driver);
 	}
 
-	if (hsotg->phy)
-		phy_exit(hsotg->phy);
 	clk_disable_unprepare(hsotg->clk);
 
 	return 0;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/