[PATCH 1/2] i2c: designware: device tree bindings for i2c speed mode

[atull]

From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>

Add "speed-mode" Device Tree property to select between
standard and fast i2c mode.  Previously, driver was hardwired
as fast mode.  Default to fast mode if property is not
present.

Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/i2c/i2c-designware.txt     |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index 5199b0c..0e4cd21 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -9,6 +9,8 @@ Required properties :
 Recommended properties :
 
  - clock-frequency : desired I2C bus clock frequency in Hz.
+ - speed-mode      : 0 = standard (0 - 100Kb/s)
+                   : 1 = fast (<= 400Kb/s) <== default
 
 Optional properties :
  - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
@@ -29,6 +31,7 @@ Example :
 		reg = <0xf0000 0x1000>;
 		interrupts = <11>;
 		clock-frequency = <400000>;
+		speed-mode = <0>;
 	};
 
 	i2c@1120000 {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/