Re: [PATCH 1/3] usb: add support for Diolan DLN-2 devices
From: Arnd Bergmann
Date: Wed Aug 20 2014 - 15:53:33 EST
On Wednesday 20 August 2014, Daniel Baluta wrote:
> From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
>
> This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
> Master Adapter DLN-2. Details about the device can be found here:
>
> https://www.diolan.com/i2c/i2c_interface.html.
>
> Information about the USB protocol can be found in the Programmer's
> Reference Manual [1], see section 1.7.
>
> Because the hardware has a single transmit endpoint and a single
> receive endpoint the communication between the various DLN2 drivers
> and the hardware will be muxed/demuxed by this driver.
>
> The functional DLN2 drivers (i2c, GPIO, etc.) will have to register
> themselves as DLN2 modules in order to send or receive data.
>
> Each DLN2 module will be identified by the handle field within the DLN2
> message header. If a DLN2 module issues multiple commands in parallel
> they will be identified by the echo counter field in the message header.
>
> The DLN2 modules can use the dln2_transfer() function to issue a
> command and wait for its response. They can also use an asynchronous
> mode of operation, in which case a receive callback function is going
> to be notified when messages for a specific handle are received.
>
> Because the hardware reserves handle 0 for GPIO events, the driver
> also reserves handle 0. It will be allocated to a DLN2 module only if
> it is explicitly requested.
>
> [1] https://www.diolan.com/downloads/dln-api-manual.pdf
>
> Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
After a very brief review of the driver, I think this would be better
handled as an MFD driver in drivers/mfd that creates child devices and
has the high-level drivers get registered as platform_driver.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/