Re: [PATCH 05/15] tty: serial: Add 8250-core based omap driver

[Sebastian Andrzej Siewior]

On 08/15/2014 11:07 PM, Tony Lindgren wrote:
> Nice, now it mostly works for me with off-idle too :) That is as long
> as I have the DMA channels commented out in the .dts file.
> 
> And I'm still seeing an occasional hang with pstore console just
> showing:
> 
> [  289.076538] In-band Error seen by MPU  at address 0
> [  289.076538] ------------[ cut here ]------------
> [  289.076568] WARNING: CPU: 0 PID: 99 at drivers/bus/omap_l3_smx.c:162 omap3_l3_app_irq+0xdc/0x134()
> [  289.076599] Modules linked in:
> [  289.076599] CPU: 0 PID: 99 Comm: test-idle-off-8 Tainted: G        W      3.16.0+ #510
> [  289.076629] [<c0016c44>] (unwind_backtrace) from [<c00129c8>] (show_stack+0x20/0x24)
> [  289.076660] [<c00129c8>] (show_stack) from [<c0714cd4>] (dump_stack+0x88/0xa4)

Okay. So this backtrace does not show more like from where the access
is happening?

> Which most likely means there's still some glitch with the
> runtime PM somewhere and registers are being accessed when
> not clocked. I _think_ I did not see it when I did not have
> console=ttyS2,115200 in my cmdline but was using just pstore
> console.
> 
>> The device name is ttyS based instead of ttyO. If a ttyO based node name
>> is required please ask udev for it. If both driver are activated (this
>> and omap-serial) then this serial driver will take control over the
>> device due to the link order
> 
> That's still not going to help with the existing kernel cmdlines
> and existing installs.. I wonder if we can just do a minimal
> dummy serial-omap.c that just proxies all the ttyO read/write
> access to ttyS?

Hmm. So you are not a friend of the udev solution?. For now the driver
is "default n" and you have to explicit enable it and _then_ you should
be able to update your command line, etc.
If I introduce a kernel proxy for compatibility I assume that people
will wake up once that compatibility piece is gone.

However, if you insist… I tried to make a symlink but nobody does this
in kernel. The "rtc -> rtc0" and friends seem to come from udev _or_
distro. So I sff could a second device node with the same major/minor.
That would work for userland but not for the kernel console… So we need
a proxy-console for this.

Before I spent time on this proxy-console I would like to hear from Greg
that he is okay with this.

> 
> Regards,
> 
> Tony

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/